Dynamic mechanical and thermal behavior of thermotropic polyesters based on 4,4-alkane-1-ω-diylbis(4-hydroxybenzoic acid) and 4,4-(pentane-1,5-diyloxy)dibenzoic acid

Thermotropic polyesters based on 4,4^′-alkane-1-ω-diylbis(4-hydroxybenzoic acid) and 4,4^′-(pentane-1,5-diyloxy)dibenzoic acid were studied by dynamic mechanical spectroscopy, X-ray scattering, differential scanning calorimetry and polarizing microscopy. The effect of structure changes in the mesogenic group as well as in the flexible spacer, in particular the incorporation of Cl atoms into the mesogen, introduction of ether oxygen into spacer and the number of CH₂ groups in spacer was investigated. More complex mechanical and thermal behaviour was found on second heating scan than on first cooling of the isotropic melt; higher values of mechanical functions were observed in the isotropic state than in the nematic state of melts. While an even number of CH₂ groups and the presence of ether oxygen in spacer shifts the transition temperatures to higher values, the incorporation of Cl atoms into the mesogen leads to disappearance of ordered structure and the polymers behave as amorphous materials.     

Direct Determination of Uranium in the D2EHPA-TOPO Organic Phase Using EDXRF Spectrometry

The determination of uranium in liquid samples using energy dispersive X-ray fluorescence was investigated. The organic phase di-(2-ethyl hexyl) phosphoric acid and trioctyl phosphine oxide (D2EHPA-TOPO)/kerosene, which resulted from first and second cycles of uranium extraction from commercial phosphoric acid, was directly analyzed using ¹⁰⁹Cd as a primary excitation source. Copper was used as an internal standard, which led to a linear relation between relative intensity of uranium and its concentration. Three calibration curves, 0–100, 100–1000 and 1000–6500 g· ml^–1, according to uranium concentration in the studied samples, were constructed. The effect of different molarities of D2EHPA and TOPO was considered. The detection limit, precision and accuracy were 1.1 g · ml^–1, 3% and 1.4%, respectively. The obtained results were compared with other techniques such as -ray spectroscopy, UV spectrometry and volumetry.     

The crystal and molecular structure of 1,1,2,4,4,5-hexaphenyl-1,4-diphosphoniacyclohexadiene-2,5 dibromide

The crystal and molecular structure of 1,1,2,4,4,5-hexaphenyl-1,4-diphosphoniacyclohexadiene-2,5 dibromide has been determined by a single crystal, x-ray diffraction study using diffractometer data. The compound crystallizes in the space group P2₁/_c with unit cell constants a = 8.813(1), b = 36.736(4), c = 12.478(1) Å, and β = 120.91°(1). The structure was solved by the heavy atom method and refined by block-diagonal least-squares to a final R = 0.04 for the 2761 statistically significant reflections. The structure determination shows that the central phosphonium ring is a diene and not a delocalized structure as anticipated. The ring is in the boat conformation with the axial phenyl rings aligned essentially parallel to each other and 3.55 Å apart.     

Quantitative analysis of relative protein contents by Western blotting: comparison of three members of the dystrophin-glycoprotein complex in slow and fast rat skeletal muscle

We have developed a method for accurate quantitative analysis and statistical comparison of the relative contents of the dystrophin-glycoprotein complex (DGC) in skeletal muscle. This method was applied to compare DGC contents in slow (soleus) and in fast (extensor digitorum longus, EDL) rat skeletal muscles. The quantitative analysis combines a modified bicinchoninic acid (BCA) assay with Western blotting and enhanced chemiluminescence (ECL). This combination allows the use of high levels of detergents and reducing reagents essential for extracting DGC. In addition, the evaluation of the total amount of proteins in each sample makes it possible to have a reference and to accurately compare relative protein levels without using a specific standard. With a large gradient gel, we could concomitantly compare two groups (n = 9) and quantify all protein contents differing highly in their molecular masses (from 35 kDa to 427 kDa). Each experiment was triplicated and normalized; the two muscles were compared using the Mann-Whitney test (P<0.001) to establish their protein content. The DGC relative levels for the slow muscle soleus and the fast muscle EDL differed significantly: dystrophin, beta-dystroglycan, and gamma-sarcoglycan levels were 130%, 110% and 120% higher in the soleus, respectively. The differences observed in the expression level of cytoskeletal associated protein (dystrophin) and transmembranous anchorage components may correspond to a physiological response of the muscle fibers to duration, magnitude, and frequency of the imposed mechanical loading.     

New results on photoion pair formation from application of the velocity imaging photoionisation coincidence technique

The velocity imaging photoionisation coincidence (VIPCO) technique is shown to be a powerful tool for studies of ion pair formation. Sequential mechanisms are demonstrated for some three-body ion pair formation reactions. Observation of a new type of reaction producing one negatively and two positively charged ions plus an electron is reported.     

Radiation-induced conductivity in poly(phenylene vinylene) derivatives

Using the pulse-radiolysis time-resolved microwave conductivity technique the mobility and decay kinetics of radiation-induced charge carriers is studied in a series of poly(2,5-dialkoxy-phenylene vinylene) derivatives. The lower limit to the sum of the mobilities of the positive and negative charge carriers, Σμ_min, depends strongly on the alkoxy functionalization and ranges from 1.2·10⁻⁷ to 1.4·10⁻⁶ m²/V·s at room temperature. Σμ_min increases with the degree of order in the material. The after-pulse conductivity decay kinetics are disperse and are controlled by a combination of charge recombination and trapping.     

Solution chemistry of uranyl ion with iminodiacetate and oxydiacetate: A combined NMR/EXAFS and potentiometry/calorimetry study

The solution chemistry of uranyl ion with iminodiacetate (IDA) and oxydiacetate (ODA) was investigated using NMR and EXAFS spectroscopies, potentiometry, and calorimetry. From the NMR and EXAFS data and depending on stoichiometry and pH, three types of metal:ligand complex were identified in solution in the pH range 3-7: 1:1 and 1:2 monomers; a 2:2 dimer. From NMR and EXAFS data for the IDA system and previous studies, we propose the three complex types are [UO(2)(IDA)(H(2)O)(2)], [UO(2)(IDA)(2)](2)(-), and [(UO(2))(2)(IDA)(2)(mu-OH)(2)](2)(-). From EXAFS spectroscopy, similar 1:1, 2:2, and 1:2 complexes are found for the ODA system, although (13)C NMR spectroscopy was not a useful probe in this system. For the 1:1 and 1:2 complexes in solution, EXAFS spectroscopy is ambiguous because the data can be fitted with either a long U-N/O(ether) value (ca. 2.9 A) suggesting 1,7-coordination of the ligand or a U-C interaction at a similar distance, consistent with terminal bidentate coordination. However, the NMR data of the IDA system suggest that 1,7-coordination is the more likely. The stability constants of the three complexes were determined by potentiometric titrations; the log beta values are 9.90 +/-, 16.42 +/-, and 10.80 +/- for the 1:1, 1:2, and 2:2 uranyl-IDA complexes, respectively, and 5.77 +/-, 7.84 +/-, and 4.29 +/- for the 1:1, 1:2, and 2:2 uranyl-ODA complexes, respectively. The thermodynamic constants for the complexes were calculated from calorimetric titrations; the enthalpy changes (kJ mol(-)(1)) and entropy changes (J K(-)(1) mol(-)(1)) of complexation for the 1:1, 1:2, and 2:2 complexes respectively are the following. IDA: 12 +/- 2, 230 +/- 8; 8 +/- 2, 151 +/- 9; -33 +/- 3, -283 +/- 11. ODA: 26 +/- 2, 198 +/- 12; 20 +/- 2, 106 +/- 8; -24 +/- 2; -219 +/- 8.     

Determination of rare earth elements by neutron activation analysis in altered ultramafic rocks from the Akwatia District of the Birim diamondiferous field,Ghana

Summary Rare earth element (REE) analysis using instrumental neutron activation (INAA) was carried out on ultramafic rocks from the Akwatia District of the Birim diamondiferous field, Ghana, with the primary objective of investigating their kimberlitic characteristics. The total REE concentrations range from 113 to 1610 ppm and fall within the interval of those reported in the literature for kimberlites. Despite the marked difference in the REE contents, all the analyzed samples show similar REE patterns that resemble those of kimberlites. However, compared to most of the kimberlites, the ultramafic rocks have small negative Eu anomalies and low light-REE/heavy-REE ratios, suggesting that the rocks have been significantly assimilated by crustal rocks.     

Radiochemical methods in nuclear waste management

Radiochemical techniques play an important role in nuclear waste management studies at the Centre for Analytical Research in the Environment. Current research includes the measurement of atmospheric emissions from a reprocessing plant, modelling of environmental pathways, and evaluation of reactor materials for the prediction of releases from ultimate disposal sites. A radiochemical separation procedure has been developed for¹²⁹I, which has been applied to a study of emissions from the Sellafield nuclear reprocessing plant. Atmospheric emissions, rainfall, grass, milk and wild food are analysed to model the ultimate fate of¹²⁹I. A new procedure has been developed for measuring sub-ppm concentrations of chlorine in archive steel samples as part of programme to produce an inventory of arisings of³⁶Cl from nuclear power stations. The method has been extended to other reactor materials and this paper describes the application of the radiochemical method for Magnox alloys, mild steel and cast iron.