Effects of sputter deposition parameters and post-deposition annealing on the electrical characteristics of LaAlO3 dielectric films on Si

The influence of processing parameters on the electrical characteristics of RuO₂/LaAlO₃/Si metal-oxide-semiconductor structures was investigated. In particular, the sputtering regime during deposition of LaAlO₃ on Si and the atmosphere used in the post-deposition annealing step were addressed by determining capacitance-voltage and gate current-voltage characteristics. These results were correlated with compositional information obtained by Rutherford backscattering spectrometry and nuclear reaction analysis. A post-deposition annealing step in oxygen at 600 °C resulted in better electrical characteristics of the final structure as compared to the same treatment performed in nitrogen. This result is explained by oxygen ability to heal oxygen vacancies in the LaAlO₃ film, especially at the dielectric/semiconductor interface region. A thermalized sputtering regime during deposition of LaAlO₃ on Si leads to capacitors with electrical characteristics superior to those deposited in ballistic regime. PACS 77.84.Dy; 81.15.Cd; 81.40.Gh; 73.40.Qv; 82.80.Yc     

Smart Geodesic Tracing in GRworkbench

We have developed a new tool for numerical work in General Relativity: GRworkbench. We discuss how GRworkbench's implementation of a numerically-amenable analogue to Differential Geometry facilitates the development of robust and chart-independent numerical algorithms. We consider, as an example, geodesic tracing on two charts covering the exterior Schwarzschild space-time.     

Every diassociative A-loop is Moufang

An A-loop is a loop in which every inner mapping is an automorphism. A problem which had been open since 1956 is settled by showing that every diassociative A-loop is Moufang.

     

Computer simulation of selective absorption of radiation by the components of a light-scattering layer

A method of calculating the partial characteristics of radiation absorption by the components of light-scattering disperse layers is proposed. This method is based on statistical modeling (the Monte Carlo method). The absorptivities of photographic gelatin and silver bromide microcrystals and the corresponding distributions of the absorbed energy over the layer thickness are calculated using the example of an interaction between actinic radiation and silver halide photographic layers in the wavelength range λ=200–440 nm. The following structural parameters of the photographic layer are used in the calculation: the mean size of emulsion crystals d=0.5 μm; the polydispersity C _V =25%; the volume concentrations C _V =10, 20, and 30%; and the thickness of the emulsion layer H=10 μm.     

A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites

The results of an extensive experimental study of the free running Nd:YAG laser drilling of a multi-layer carbon fibre composite, where adjacent layers have differently orientated fibres, are reported. For holes drilled with the laser operating in fixed-Q mode at 1064 nm, parallel sections of blind holes illustrating discontinuities in the hole size along a given section direction will be shown to occur at the interface between adjacent layers. An explanation for this effect is proposed. Detailed single pulse drilling characteristics will be presented illustrating the exit hole diameter as a function of pulse energy and material thickness. These characteristics illustrate a ‘stable' drilling regime in which the exit hole diameters are least sensitive to changes in pulse energy or material thickness and a less ‘stable' regime in which they are more strongly dependent on these parameters. Drilling characteristics will be given for two different beam qualities, illustrating the greater drilling depth and reduced hole size achievable with an improved beam quality. Finally holes drilled through a 2 mm thick sample of material with multiple pulses are considered. Size distribution curves for entrance and exit holes will be presented. The total energy required (number of pulses × pulse energy) to drill through 2 mm thick material will be reported as a function of pulse energy in stationary air and argon atmospheres and in a partial vacuum, illustrating a threshold energy which is dependent upon the drilling atmosphere. The threshold energies will be discussed with reference to plasma formation and the reactivity of the drilling atmosphere.     

Lateral interactions in the thermal desorption of H2 from clean Cu/Ni(110) alloy surfaces

The adsorption of hydrogen on a clean Cu10%/Ni90% (110) alloy single crystal was studied using flash desorption spectroscopy (FDS), Auger electron spectroscopy (AES), and work function measurements. Surface compositions were varied from 100% Ni to 35% Ni. The hydrogen chemisorption on a-surface of 100% nickel revealed strong attractive interactions between the hydrogen atoms in accordance with previous work on Ni(100). Three desorption states (β₁, β₂ and α) appeared in the desorption spectra. The highest temperature (α) state was occupied only after the initial population of the β₂-state. As the amount of copper was increased in the nickel substrate, desorption from the higher energy binding α-state was reduced, indicating a decrease in the attractive interactions among hydrogen atoms. The hydrogen coverage at saturation was not affected by the addition of copper to the nickel substrate until the copper concentration was greater than 25% at which a sharp reduction in saturation coverage occurred. This phenomenon was apparently due to the adsorption of hydrogen on Ni atoms followed by occupation of NiNi and CuNi bridged adsorption sites, while occupation of CuCu sites was restricted due to an energy barrier to migration.     

Evaluation of integrals and the mellin transform

Translated from Itogi Nauki i Tekhniki, Seriya Matematicheskii Analiz, Vol. 27, pp. 3–146, 1989.     

Comparisons between model equations for long waves

Summary Considered here are model equations for weakly nonlinear and dispersive long waves, which feature general forms of dispersion and pure power nonlinearity. Two variants of such equations are introduced, one of Korteweg-de Vries type and one of regularized long-wave type. It is proven that solutions of the pure initial-value problem for these two types of model equations are the same, to within the order of accuracy attributable to either, on the long time scale during which nonlinear and dispersive effects may accumulate to make an order-one relative difference to the wave profiles.This research was supported in part by the National Science Foundation. A considerable portion of the project was completed while the first author was resident at the Institute for Mathematics and Its Applications, University of Minnesota.