MHD forced convection of nanofluid flow in an open-cell metal foam heatsink under LTNE conditions

Journal of Thermal Analysis and Calorimetry - In this paper, nanofluid forced convective heat transfer through an open-cell metal foam heatsink under a uniform heat flux, numerically has been...     

Simultaneous Effects of External Electric Field and Conduction Band Nonparabolicity on Optical Properties of a GaAs Quantum Dot Embedded at the Center of a GaAlAs Nano-Wire

An investigation of the optical properties of a GaAs spherical quantum dot which is located at the center of a Ga1-xAlx As cylindrical nano-wire has been performed in the presence of an external electric field. The band nonparabolieity effect is also considered using the energy dependent effective mass approximation. The energy eigenvalues and corresponding wave functions are calculated by finite difference approximation and the reliability of calculated wave functions is checked by computing orthogonality. Using computed energy eigenvalues and wave functions, the linear, third-order nonlinear and total optical absorption coefficients and refractive index changes are examined in detail. It is found that （i） Presence of electric field causes both blue and red shifts in absorption spectrum; （ii） The absorption coefficients shift toward lower energies by taking into account the conduction band nonparabolicity; （iii） For large values of electric field the effect of conduction band nonparabolieity is less dominant and parabolic band is estimated correctly; （iv） In the presence of electric field and conduction band nonparabolicity the nonlinear term of absorption coefficient rapidly increases by increasing incident optical intensity. In other words, the saturation in optical spectrum occurs at lower incident optical intensities.     

Effect of 2D Image Resolution on 3D Stochastic Reconstruction and Developing Petrophysical Trend

Multi-resolution digital rock physics (DRP) makes it possible to up-scale petrophysical properties from micron size to core sample size using two-dimensional (2D) thin section images. Resolution of 3D images and sample size are challenging problems in DRP where high-resolution images are acquired from small samples using inefficient and expensive micro-CT facilities. Three-dimensional stochastic reconstruction is an alternative approach to overcome these challenges. In this paper, we use multi-resolution images and investigate effect of 2D image resolution on 3D stochastic reconstruction and development of petrophysical trends for our two sandstone and carbonate original representative volume elements (RVEs). The proposed method includes three steps. In the first step, the spatial resolution of our original RVEs is decreased synthetically. In the second step, stochastic RVEs are realized for each resolution using two perpendicular images, correlation functions, and phase recovery algorithm. In the reconstruction method, a full set of two-point correlation functions (TPCFs) is extracted from two perpendicular 2D images. Then TPCF vectors are decomposed and averaged to realize 3D stochastic RVEs. In the third step, petrophysical properties like relative and absolute permeability as well as porosity and formation factor are computed. The output is used to develop trends for petrophysical properties in different resolutions. Experimental results illustrate that the proposed method can be used to predict petrophysical properties and reconstruct 3D RVEs for resolutions unavailable in the acquired 2D or 3D data.     

Investigating Supercritical CO2 Foam Propagation Distance: Conversion from Strong Foam to Weak Foam vs. Gravity Segregation

Transport in Porous Media - This study investigates how to determine the optimal supercritical CO2 foam injection strategies, in terms of total injection rate (or injection pressure, equivalently)...     

A Discretization Approach for the Nonlinear Fractional Logistic Equation

The present study aimed to develop and investigate the local discontinuous Galerkin method for the numerical solution of the fractional logistic differential equation, occurring in many biological and social science phenomena. The fractional derivative is described in the sense of Liouville-Caputo. Using the upwind numerical fluxes, the numerical stability of the method is proved in the L∞ norm. With the aid of the shifted Legendre polynomials, the weak form is reduced into a system of the algebraic equations to be solved in each subinterval. Furthermore, to handle the nonlinear term, the technique of product approximation is utilized. The utility of the present discretization technique and some well-known standard schemes is checked through numerical calculations on a range of linear and nonlinear problems with analytical solutions.     

Improving performance of AHU using exhaust air potential by applying exergy analysis

Journal of Thermal Analysis and Calorimetry - In this study, the exergy analysis of an AHU equipped with a heat and exergy recovery unit was investigated. The equations obtained from energy and...     

Multifunctional poly(amidoamine)-functionalized silica nanoparticles for epoxide-functionalized polyurethane and novolac resins crosslinking

Journal of Thermal Analysis and Calorimetry - Polyurethane and novolac resins functionalized with epoxide groups were cured by a multifunctional crosslinking agent decorated with amine functional...     

Influence of Nanoparticle Processing on the Thermoelectric Properties of (BixSb1−X)2Te3 Ternary Alloys

The synthesis of phase-pure ternary solutions of tetradymite-type materials (Bi_xSb_1−x)₂Te₃ (x=0.25; 0.50; 0.75) in an ionic liquid approach has been carried out. The nanoparticles are characterized by means of energy-dispersive X-ray spectroscopy (EDX), powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), and transmission electron microscopy. In addition, the role of different processing approaches on the thermoelectric properties - Seebeck coefficient as well as electrical and thermal conductivity - is demonstrated.     

Effect of KCl on the volumetric and transport properties of aqueous tri-potassium citrate solutions at different temperatures

Density, speed of sound and viscosity measurements of binary aqueous solutions of tri-potassium citrate were performed from dilute up to near saturated concentration range at T = (293.15, 298.15, 303.15, 308.15, and 313.15) K. Volumetric and transport properties of ternary aqueous solutions of (tri-potassium citrate + KCl) have also been measured within the molality range of KCl (0.05, 0.15, 0.25, 0.35, 0.45, and 0.55) at different temperatures. Apparent molar volume and apparent molar isentropic compressibility have been calculated from the density and speed of sound for binary and ternary aqueous solutions of tri-potassium citrate. Apparent molar volume and apparent molar isentropic compressibility of ternary aqueous solutions of (tri-potassium citrate + KCl) have been correlated with the Redlich–Mayer equation. Viscosity values of ternary aqueous solutions of (tri-potassium citrate + KCl) have been fitted with the Jones–Dole equation. The results obtained have been interpreted in elucidating the effect of tri-potassium citrate on the interaction of KCl–H₂O. Density and viscosity values of ternary aqueous solutions of (tri-potassium citrate + KCl) have been predicted successfully using the methods proposed by Laliberte (2007), Laliberte and Cooper (2004) [9], [10] and Zafarani-Moattar and Majdan-Cegincara (2009) [11].