Determination of imazalil by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

A simple, rapid and reproducible capillary isotachophoretic on-line coupled with capillary zone electrophoresis (CITP-CZE) method for the determination of IMz in food packaging extracts and its residues in apples is described. A good separation of the IMZ from other sample constituents was achieved within 15 minutes without any sample clean up. Method characteristics (linearity, accuracy, intra-assay and detection limit) were determined. Less amount of time involved, sufficient sensitivity and low running cost are the important attributes of CITP-CZE method.     

Kinetic Determination of Microquantities of Rutin by Perturbation of the Bray-Liebhafsky Oscillatory Reaction in an Open System

A kinetic method is described for the microquantitative (microconcentration/microvolume) determination of rutin based on potentiometric monitoring of the concentration perturbations of the Bray-Liebhafsky (BL) oscillatory reaction being in a non-equilibrium stationary state close to a bifurcation point. The experiments are carried out in an open reactor. The response of the matrix system to perturbations by different concentrations of rutin ethanolic solutions is followed by a Pt-electrode. In the concentration range between 7.8×10^–8moldm^–3 and 9.1×10^–6mol dm^–3, we found a linear dependence of the maximal potential shift, E_m, on the logarithm of the rutin concentrations. The unknown concentrations can be determined from the calibration curve up to an accuracy of ±5%. The detection limit is 3.6×10^–8mol dm^–3. The amount of required sample can be as small as 10µL.     

Lanthanide nitrate complexes with 2-azacyclononanone

Thermal behavior of rare earth nitrate complexes with 2-azacyclononanone (AZA) with Ln(NO₃)₃·3(AZA) composition (where Ln=Gd, Er and Ho) was analyzed in kinetic point of view. Kinetic parameters were calculated from thermogravimetric data. All obtained results were similar. The first decomposition step was representative to the loss of ligand and the residue was essentially Ln₂O₃. Furthermore, a reaction path was proposed for the thermal decomposition of the Ln(NO₃)₃·3(AZA).     

Elastic scattering cross sections for 160<Superscript>°</Superscript> and 170<Superscript>°</Superscript>backscattering of 1.40-2.64 MeV protons from natural vanadium

Summary The elastic scattering cross sections of natural vanadium for protons have been measured for beam energies below 2.64 MeV in steps of 10 keV and in the angular 160° and 170°. The overall standard error (Δσ_Exp/σ_Exp) in the measured cross sections is estimated to be better than ±3% at all the beam energies and angles. The results are presented in graphical and tabular forms that should be useful for those who wish to use the cross sections for material analysis.     

About compensation effect by thermal decomposition of some catalyst precursors

Summary In order to obtain catalysts, the thermal decomposition of the precursors is a compulsory step. However, kinetic analysis of the decomposition data obtained under non-isothermal conditions lead very seldom to the intimate reaction mechanism. There is also a lack of information because in non-isothermal kinetics, the compensation effect, is rather a rule and unfortunately a source of debate. In order to discriminate between these processes, and the influence of conversion, respectively temperature on the reaction rate, the NPK (non-parametric kinetic - Sempere and Nomen) method was used. This method is based on the singular value decomposition algorithm (SVD) applied on the matrix of reaction rate at corresponding conversion and temperature. This method allows a less speculative determination of the conversion functions and of the kinetic parameters.     

Optimized conditions for hydrocarbon group type analysis of base oils by thin-layer chromatography-flame ionisation detection

The results of research on the optimization of the thin-layer chromatography-flame ionisation detection for the determination of group composition of natural base oils, including separation of the aromatics into subgroups, are presented. Neutral base oils obtained in several steps of refining from vacuum distillation petroleum fractions are the most difficult to analyze by hydrocarbon group type analysis (HGTA) because of the high content of aliphatic fragments in their molecules. Factors affecting the accuracy and precision of the results were identified. The paper presents the analytical procedure, including two different calibration methods, as well as the results of studies on the reproducibility of HGTA of typical base oils of different viscosity classes under the optimized conditions. The same conditions were found suitable for HGTA of other high-boiling petroleum fractions by TLC with flame ionisation detection. The paper also introduces a new procedure for reproducible determination of polar fractions in base oils utilizing solid-phase extraction columns, and presents a corrected procedure for the determination of saturated compounds and aromatics (mono-, bi- and polycyclic) in base oils by column liquid chromatography.     

Facts and artifacts about aromatic stability estimation

The stability of a set of 105 five-membered π-electron systems (involving aromatic, non-aromatic and anti-aromatic species) was evaluated using six isodesmic reactions of which two belong to the subclass of homodesmotic reactions, which are based on cyclic and acyclic reference systems. We demonstrate that the ‘Resonance Energies’ derived from isodesmotic schemes have obvious flaws and do not correct or cancel other contributions to the energy, such as the changes of hybridization, homoconjugation of heterosubstituted cyclopentadienes, conjugative interactions of CC or CX (X=N or P) with a π or pseudo π orbital at Y (Y=O, S, NH, PH), strain, etc. as effectively as possible. Likewise, ‘aromatic stabilization energies (ASE)’ derived from homodesmotic schemes based on the acyclic reference compounds do not give satisfactory results. We strongly recommend that only cyclic reference compounds should be used for ASE and other aromaticity evaluations. The analysis is based on ab initio optimized geometries at B3LYP/6-311+G^∗∗.     

Solid state a.c. conductivity and FT-IR spectral analyses for the conflicting effects of proton mobility and association in some azophenol derivatives of cyclic phosphazene

Variable strength H-bonding affects the mobility and so electric conduction of protons differently. Also, variable extent mesomerism modifies electric conduction with varying dielectric features. Both these molecular modifiers are properly cited using azophenol derivatives as model compounds for discussion of their consequences in the varying features of electric conduction. The electric permittivity shows low-frequency dispersion characteristic of ionic conduction over mobile charge carries; the mobility shifts at a critical temperature T _c, being structure dependent. The frequency-dependent Z′′-Z′ layout changes with temperature from linear at low temperatures to semicircular above T _c within a frame of temperature-sensitive dipole-ionic mediated conduction. The a.c. conductivity, σ_ac, increases with frequency and temperature and becomes frequency insensitive, like d.c. conductivity, σ_dc, above the T _c because of the escalating contribution from the d.c. conduction. The mesomeric structure seems to prompt a dipole-based electric conduction of high relaxation energy over the strongly associated phenolic protons that may be thermally activated above the T _c into a much lower relaxation energy protonic conduction of up to two orders higher conductivity. The protonic conduction emerges at a T _c that falls with a drop in the relaxation energy following a similar order of increasing proton mobility and mesomerism in the azophenol derivatives: azocatechol>azoquinol>azoresorcinol. On the molecular level, variable temperature infrared spectroscopy reveals higher proton mobility and mesomerism for the azocatechol derivative that demonstrates its higher protonic conductivity at lower T _c and relaxation energy, compared to the azoquinol and azoresorcinol derivatives. This is well verified in the light of conflicting intramolecular H-bonding that assists the proton mobility in azocatechol whereas it associates the protons in azoresorcinol more than in azoquinol. Electronic Publication     

Kinetics and mechanism of the first aquation stage for the [Cr(pic)3]0 and [Cr(pic)2(OH)]2 0 complexes in HClO4 solutions

Aquation of [Cr(pic)₃]⁰ and [Cr(pic)₂(OH)]₂ ⁰ in aqueous HClO₄ solutions leads to formation of the common product – [Cr(pic)₂(H₂O)₂]⁺. The first, reversible stage, the ring opening via Cr—N bond breaking in [Cr(pic)₃]⁰ is followed by the second, rate-determining step – one-end bonded pic ligand liberation. In the case of the [Cr(pic)₂(OH)]₂ ⁰ complex, the first faster stage produces the singly bridged dimer, which undergoes cleavage into the parent monomers in the second, much slower step. The subsequent aquation of [Cr(pic)₂(H₂O)₂]⁺ is extremely slow and leads to [Cr(pic)(H₂O)₄]²⁺ formation, which practically does not undergo further ligand substitution under the conditions applied. Kinetics of the first aquation stage for [Cr(pic)₃]⁰ and of the second step for [Cr(pic)₂(OH)]₂ ⁰ were studied spectrophotometrically in the 0.1–1.0 M HClO₄ range at I = 1.0 M. The observed pseudo-first order rate constant for [Cr(pic)₃]⁰ decreases with [H⁺] increase according to the rate law: k _obs = k ₁ + k _–1 Q ₁/[H⁺], where k ₁ and k _–1 are the rate constants of the forward and the reverse processes in the unprotonated substrate and Q ₁ is the protonation constant of the pyridine nitrogen atom. In the case of the [Cr(pic)₂(OH)]₂ ⁰ complex, the rate for the singly bridged dimer cleavage does not depend on [H⁺]. The activation parameters for the chelate-ring opening in [Cr(pic)₃]⁰ and for the singly bridged dimer cleavage have been determined and discussed. Some kinetic data of the slow, second aquation stage for the [Cr(pic)₃]⁰ complex and of the fast, first aquation stage for the doubly bridged dimer have been studied; for both reactions the rate increases linearly with the increase in [H⁺].     

Microwave-assisted extraction of zearalenone from wheat and corn

A microwave-assisted extraction (MAE) method has been developed for determination of zearalenone in wheat and corn by LC-MS with an atmospheric pressure chemical ionization interface (APCI). Matrix effects were minimized by use of matrix-matched standard curves for quantification of the analyte. The limit of quantification (LOQ) of the method was 30 ng g(-1) in wheat and 20 ng g(-1) in corn. The rapid LC-MS method enabled analysis of the extracts without clean-up, thereby reducing analyte losses, the time required for the analytical procedure, and costs. A factorial design approach was used to examine the effect on extraction efficiency of the main extraction conditions - time, temperature, and solvent. On the basis of results from statistical assessment extraction was performed with 1:1 (v/v) methanol-acetonitrile at 80 degrees C for 5 min. When these extraction conditions were applied to a wheat sample from a recently conducted international proficiency test, 92% (103 ng g(-1)) of the assigned zearalenone concentration (112 ng g(-1)) in the test material was obtained. This result was within the uncertainty (u) range of the assigned value of the test material (u=+/-15.8 ng g(-1), alpha=0.05) thereby demonstrating the accuracy of the method was sufficient. The precision of the whole method was also confirmed to be adequate, because the observed relative standard deviation (RSD) of 12% (n=10) also fulfils the quality criteria recommended by European guidelines for in-house method validation.