A Spectrophotometric Study of Streptomycin Effect on the Clinical Urea Determination

The results of studying inhibitory effect of streptomycin on the modified Berthelot reaction were presented in this paper and a new kinetic method for determining streptomycin in pharmaceutical preparations and human urine was developed on the basis of the obtained results. The rates of catalytic and catalytic‐inhibitory reaction were monitored at 700 nm (t=25±0.1°C) using UV/vis spectrophotometer. By analyzing the spectra and experimental dependences of the catalytic and catalytic‐inhibitory reaction rates on the reactant concentrations, it was noticed that streptomycin attacked nitroprusside and hypochlorite causing the inhibition of the production of 2,2′‐dicarboxylindophenol. According to this effect, an analytical decrease for determination of urea by modified Berthelot reaction appeared in the presence of small amounts of streptomycin. Beer's law was obeyed in the interval of streptomycin sulfate concentration from 18.2 to 182 µg·mL^?1. The detection limit calculated by two methods was obtained at 11.75 µg·mL^?1 and 8.54 µg·mL^?1. The relative standard deviation of 0.55%–8.83% and the recovery of 109.10% were determined. The obtained results were validated using the referent HPLC method.     

A New Indirect Electrochemical Method for Determination of Ozone in Water Using Multiwalled Carbon Nanotubes

A new electrochemical methodology has been developed for the detection of ozone using multiwalled carbon nanotubes (MWCNT). The method presented here is based on the reaction of ozone with indigo blue dye producing anthranilic acid (ATN). The electrochemical profile of ATN on an electrode of glassy carbon (GC) modified with MWCNT showed an oxidation peak potential at 750 mV vs. Ag/AgCl. An analytical method was developed using differential pulse voltammetry (DPV) to determine ATN in a range of 50–400 nmol L^?1, with a detection limit of 9.7 nmol L^?1. Ozonated water samples were successfully analyzed by GC/MWCNT electrode and the recovery procedure yielded values between of 96.5 and 102.3 %.     

Interaction of metal ions with biomolecular ligands: how accurate are calculated free energies associated with metal ion complexation?

To address fundamental questions in bioinorganic chemistry, such as metal ion selectivity, accurate computational protocols for both the gas-phase association of metal-ligand complexes and solvation/desolvation energies of the species involved are needed. In this work, we attempt to critically evaluate the performance of the ab initio and DFT electronic structure methods available and recent solvation models in calculations of the energetics associated with metal ion complexation. On the example of five model complexes ([M(II)(CH(3)S)(H(2)O)](+), [M(II)(H(2)O)(2)(H(2)S)(NH(3))](2+), [M(II)(CH(3)S)(NH(3))(H(2)O)(CH(3)COO)], [M(II)(H(2)O)(3)(SH)(CH(3)COO)(Im)], [M(II)(H(2)S)(H(2)O)(CH(3)COO)(PhOH)(Im)](+) in typical coordination geometries) and four metal ions (Fe(2+), Cu(2+), Zn(2+), and Cd(2+); representing open- and closed-shell and the first- and second-row transition metal elements), we provide reference values for the gas-phase complexation energies, as presumably obtained using the CCSD(T)/aug-cc-pVTZ method, and compare them with cheaper methods, such as DFT and RI-MP2, that can be used for large-scale calculations. We also discuss two possible definitions of interaction energies underlying the theoretically predicted metal-ion selectivity and the effect of geometry optimization on these values. Finally, popular solvation models, such as COSMO-RS and SMD, are used to demonstrate whether quantum chemical calculations can provide the overall free enthalpy (ΔG) changes in the range of the expected experimental values for the model complexes or match the experimental stability constants in the case of three complexes for which the experimental data exist. The data presented highlight several intricacies in the theoretical predictions of the experimental stability constants: the covalent character of some metal-ligand bonds (e.g., Cu(II)-thiolate) causing larger errors in the gas-phase complexation energies, inaccuracies in the treatment of solvation of the charged species, and difficulties in the definition of the reference state for Jahn-Teller unstable systems (e.g., [Cu(H(2)O)(6)](2+)). Although the agreement between the experimental (as derived from the stability constants) and calculated values is often within 5 kcal·mol(-1), in more complicated cases, it may exceed 15 kcal·mol(-1). Therefore, extreme caution must be exercised in assessing the subtle issues of metal ion selectivity quantitatively.     

Inhibition of Candida albicans CC biofilms formation in polystyrene plate surfaces by biosurfactant produced by Trichosporon montevideense CLOA72

This study evaluated the effects of glycolipid-type biosurfactant produced by Trichosporon montevideense CLOA72 in the formation of biofilms in polystyrene plate surfaces by Candida albicans CC isolated from the apical tooth canal. Biofilm formation was reduced up to 87.4% with use of biosurfactant at 16 mg/ml concentration. It has been suggested that the interaction with the cell or polystyrene plate surface could ultimately be responsible for these actions. Therefore, the interaction of C. albicans CC cells with the biosurfactant, as well as the corresponding thermodynamic parameters, have been determined by isothermal titration calorimetry and zeta potential measurements. This process is endothermic (((int)H°=+1284±5 cal/mg OD(600)) occurring with a high increase of entropy (T((int)S°=+10635 cal/mg OD(600)). The caloric energy rate data released during the titulation indicates saturation of the cell-biosurfactant at 1.28 mg/ml OD(600). Also, the zeta potential of the cell surface was monitored as a function of the biosurfactant concentration added to cell suspension showing partial neutralization of net surface charge, since the value of zeta potential ranged from -16 mV to -6 mV during the titration. The changes of cell surface characteristics can contribute to the inhibition of initial adherence of cells of C. albicans in surface. The CMC of the purified biosurfactant produced from T. montevideense CLOA72 is 2.2 mg/ml, as determined both by ITC dilution experiments and by surface tension measurements. This biomolecule did not presented any cytotoxic effect in HEK 293A cell line at concentrations of 0.25-1 mg/ml. This study suggests a possible application of the referred biosurfactant in inhibiting the formation of biofilms on plastic surfaces by C. albicans.     

A new approach to study cadmium complexes with oxalic acid in soil solution

This study presents a new analytical approach for the determination of heavy metals complexed to low-molecular-weight-organic acids in soil solutions, which combines the sensitivity of differential pulse anodic stripping voltammetry (DPASV) with the molecular insight gained by electrospray ionization mass spectrometry (ESI-MS). The combination of these analytical methods allows the investigation of such complexes in complex matrixes. On the voltammograms of the soil solutions, in addition to the expected complexes of oxalic acid with cadmium and lead, respectively, also peaks belonging to mixed complexes of cadmium, lead, and oxalic acid (OAH(2)) were observed. In order to verify the possible formation of complexes with OAH(2), aqueous solutions of OAH(2) with traces of Cd(II) were investigated as model systems. Signals corresponding to several distinct molecular complexes between cadmium and oxalic acid were detected in the model solutions using negative-ion ESI-MS, which follow the general formula [Cd(n)(X,Y)((2n+1))](-), where n is the number of cadmium atoms, X=Cl(-), and Y=OAH(-). Some of these complexes were also identified in the ESI mass spectra taken from the soil solutions.     

Fluxionality of hydrogen ligands in Fe(H)2(H2)(PEtPh2)3

Extensive computational investigations along with additional quasielastic neutron scattering data were used to obtain a consistent picture of the extensive fluxionality of hydride and dihydrogen ligands in Fe(H)(2)(H(2))(PEtPh(2))(3) over a wide range of temperatures from 1.5 to 320 K. We were able to identify three different regimes in the dynamical processes based on activation energies obtained from line spectral broadening. The rotational tunneling lines (coherent exchange of the two hydrogens of the H(2) ligand) are broadened with increasing temperature by incoherent exchange up to about 80 K at which point they merge into a quasielastic spectrum from 100 K to about 225 K. The effective activation energies for the two regions are 0.14 and 0.1 kcal mol(-1), respectively. A third dynamical process with a higher activation energy of 0.44 kcal mol(-1) dominates above 225 K, which we attribute to a quantum dynamical exchange of dihydrogen and hydride ligands. Our detailed density functional theory (DFT) structural calculations involving the three functionals (B3LYP, TPSS, and wB97XD) provide a good account of the experimental structure and rotational barriers when only the hydrogen ligands are relaxed. Full relaxation of the "gas-phase" molecule, however, appears to occur to a greater degree than what is possible in the crystal structure. The classical dihydrogen-hydride exchange path involves a cis-dihydrogen and tetrahydride structure with energies of 6.49 and 7.38 kcal mol(-1), respectively. Experimental observation of this process with much lower energies would seem to suggest involvement of translational tunneling in addition to the rotational tunneling. Dynamics of this type may be presumed to be important in hydrogen spillover from metal particles, and therefore need to be elucidated in an effort to utilize this phenomenon.     

Water exchange reactivity and stability of cobalt polyoxometalates under catalytically relevant pH conditions: insight into water oxidation catalysis

Water exchange on a molecular, purely inorganic cobalt-based water oxidation catalyst, [Co(4)(II)(H(2)O)(2)(α-P(1)W(9)O(34))(2)](10-) (1), in the catalytically relevant pH region (pH 6-10) is studied using (17)O-NMR spectroscopy and ultrahigh-resolution electrospray ionization mass spectrometry. The results are compared with those of the inactive [Co(II)(H(2)O)(1)Si(1)W(11)O(39)](6-) (2), which is stable in the same pH region. The results obtained provide mechanistic details of the elementary reaction step related to the water oxidation on homogeneous metal oxide catalysts under catalytically relevant conditions. It is shown that the structural integrity of 1 and 2 is maintained, no deprotonation of the aqua ligands on the Co(II) centers occurs, and the water exchange does not undergo any mechanistic changeover at the catalytic pH conditions. We have demonstrated that the water exchange process is influenced by the cluster environment surrounding the water binding sites and is fast enough to not be rate-limiting for the water oxidation catalysis.     

Optimization of Modern Analytical SPME and SPDE Methods for Determination of <Emphasis Type="Italic">Trans</Emphasis>-2-nonenal in Barley,Malt and Beer

Trans-2-nonenal is an aldehyde contributing to an unpleasant off-flavor and odor of rancid butter in stored beer. The automated solid-phase microextraction technique (SPME) coupled with gas chromatography (GC) and solid-phase dynamic extraction (SPDE) coupled with gas chromatography were optimized and introduced to determine trans-2-nonenal in barley, malt and beer. Five types of SPME fibers coated with different stationary phases (100 μm PDMS, 65 μm PDMS/DVB, 85 μm CAR/PDMS, 50/30 μm DVB/CAR/PDMS, 85 μm PA) and two needles (PDMS, PDMS/AC) were compared and tested for their efficiencies in the headspace (HS) SPME and SPDE determination of trans-2-nonenal in barley, malt and beer. The highest extraction efficiency of HS-SPME was achieved with the PDMS/DVB fiber, and addition of 1.5 g of NaCl, extraction time was 20 min at 60 °C. The highest extraction efficiency of HS-SPDE was obtained with the PDMS needle, 15 extraction strokes at 60 °C and addition of 1.5 g of NaCl. Trans-2-nonenal was identified with the method of HS-SPME coupled gas chromatography-mass spectrometry (GC–MS); the samples were analyzed using the HS-SPME-GC-coupled gas chromatography-flame ionization detector (GC-FID) technique.     

Photochemical approach to naphthoxazoles and fused heterobenzoxazoles from 5-(phenyl/heteroarylethenyl)oxazoles

A new synthetic approach is presented for the synthesis of naphthoxazoles and fused heterobenzoxazoles. The starting 5-(aryl/furyl/thienyl/pyridyl ethenyl)oxazoles are prepared from the corresponding α,β-unsaturated aldehydes using Van Leusen reagent in very good yields and are transformed into naphthoxazoles and fused heterobenzoxazoles on irradiation under aerobic conditions and in the presence of iodine.     

Effects of rutin and hesperidin and their Al(III) and Cu(II) complexes on in vitro plasma coagulation assays

Two flavonoids, rutin and hesperidin, were investigated in vitro for anticoagulant activity through coagulation tests: activated partial thromboplastin time (aPTT), prothrombin time (PT) and thrombin time (TT). Only an ethanolic solution of rutin at the concentration of 830 μM prolonged aPTT, while TT and PT were unaffected. In order to evaluate whether the prolongation of aPTT was due to the decrease of coagulation factors, the experiment with deficient plasma was performed, showing the effects on factors VIII and IX. Since pharmacological activity of flavonoids is believed to increase when they are coordinated with metal ions, complexes of these flavonoids with Al(III) and Cu(II) ions were also tested. The results showed that complexes significantly prolonged aPTT and had no effects on PT and TT. Assay with deficient plasma (plasma having the investigated factor at less then 1%) revealed that complexes could bind to the coagulation factors, what may lead to a non-specific inhibition and aPTT prolongation. An effort was made to correlate stability of complexes with their anticoagulant properties.