Modification and photostabilization of low density polyethylene film by photodecomposition of various diazo-compounds and methyl azidocarboxylate

Various diazo-compounds, 1,2,2,6,6-pentamethylpiperidin-4-yl diazoacetate (PMPDA), 2,2,6,6-tetramethylpiperidin-4-yl diazoacetate (TMPDA), methyl diazoacetate (MDA), 1,2,2,6,6-pentamethylpiperidin-4-yl 2-diazo-3-methyloxycarbonylpropionate (PMPMDS), 1,2,2,6,6-pentamethylpiperidin-4-yl 2-diazo-4-methyloxycarbonylbutanoate (PMPMDP), and one azide, methyl azidocarboxylate (MAC), were successfully prepared and grafted on polyethylene films by UV light (λ > 210 nm) activation. The treated films were characterised by FT-IR spectroscopy and contact angle measurements. Ab-initio quantum mechanical calculations allowed simulating the IR absorption spectra of the polymer grafted species. These last and the related grafting yields are discussed with reference to the diazo-compound structure and concentration. Up to 8.6 mol% of bonded groups (grafted groups/ethylene monomeric unit) were found without affecting the polymer molecular weight distribution, as shown by GPC analysis. All modified films bearing HAS groups showed very high photo-stability.     

Microhydration effects on the electronic spectra of protonated polycyclic aromatic hydrocarbons: [naphthalene-(H2O)(n = 1,2)]H+

Vibrational and electronic spectra of protonated naphthalene (NaphH(+)) microsolvated by one and two water molecules were obtained by photofragmentation spectroscopy. The IR spectrum of the monohydrated species is consistent with a structure with the proton located on the aromatic molecule, NaphH(+)-H(2)O. Similar to isolated NaphH(+), the first electronic transition of NaphH(+)-H(2)O (S(1)) occurs in the visible range near 500 nm. The doubly hydrated species lacks any absorption in the visible range (420-600 nm) but absorbs in the UV range, similar to neutral Naph. This observation is consistent with a structure, in which the proton is located on the water moiety, Naph-(H(2)O)(2)H(+). Ab initio calculations for [Naph-(H(2)O)(n)]H(+) confirm that the excess proton transfers from Naph to the solvent cluster upon attachment of the second water molecule.     

Ground- and excited-state properties of the mixed-valence complex [(NH3)5Ru(III)NCRu(II)(CN)5]-

A computational study of the ground- and excited-state properties of the mixed-valence complex [(NH 3) 5Ru (III)NCRu (II)(CN) 5] (-) is presented. Employing DFT and TDDFT calculations for the complex in the gas phase and in aqueous solution, we investigate the vibrational and electronic structure of the complex in the electronic ground state as well as the character of the electronically excited states. The relevance of the various excited states for the intervalence metal-metal charge-transfer process in the complex is analyzed based on the change of charge density, spin density, and dipole moment upon photoexcitation as well as by a Mulliken-Hush analysis. Furthermore, those intramolecular modes, which are important for the charge-transfer process, are identified and characterized.     

Novel ion traps using planar resistive electrodes: Implications for miniaturized mass analyzers

In radiofrequency ion traps, electric fields are produced by applying time-varying potentials between machined metal electrodes. The electrode shape constitutes a boundary condition and defines the field shape. This paper presents a new approach to making ion traps in which the electrodes consist of two ceramic discs, the facing surfaces of which are lithographically imprinted with sets of concentric metal rings and overlaid with a resistive material. A radial potential function can be applied to the resistive material such that the potential between the plates is quadrupolar, and ions are trapped between the plates. The electric field is independent of geometry and can be optimized electronically. The trap can produce any trapping field geometry, including both a toroidal trapping geometry and the traditional Paul-trap field. Dimensionally smaller ion trajectories, as would be produced in a miniaturized ion trap, can be achieved by increasing the potential gradient on the resistive material and operating the trap at higher frequency, rather than by making any physical changes to the trap or the electrodes. Obstacles to miniaturization of ion traps, such as fabrication tolerances, surface smoothness, electrode alignment, limited access for ionization or ion injection, and small trapping volume are addressed using this design.     

The ice-vapor interface and the melting point of ice I(h) for the polarizable POL3 water model

We use molecular dynamics simulations to determine the melting point of ice I(h) for the polarizable POL3 water force field (Dang, L. X. J. Chem. Phys.1992, 97, 2659). Simulations are performed on a slab of ice I(h) with two free surfaces at several different temperatures. The analysis of the time evolution of the total energy in the course of the simulations at the set of temperatures yields the melting point of the POL3 model to be T(m) = 180 ± 10 K. Moreover, the results of the simulations show that the degree of hydrogen-bond disorder occurring in the bulk of POL3 ice is larger (at the corresponding degree of undercooling) than in ice modeled by nonpolarizable water models. These results demonstrate that the POL3 water force field is rather a poor model for studying ice and ice-liquid or ice-vapor interfaces. While a number of polarizable water models have been developed over the past years, little is known about their performance in simulations of supercooled water and ice. This study thus highlights the need for testing of the existing polarizable water models over a broad range of temperatures, pressures, and phases, and developing a new polarizable water force field, reliable over larger areas of the phase diagram.     

Iron-oxide-modified nanosized diamond: preparation, characterization, and catalytic properties in methanol decomposition

Nanosized diamond (UDD), obtained by a detonation procedure, was modified with iron from the corresponding acetylacetonate precursor under various pretreatment conditions. Nitrogen physisorption, X-ray diffraction, temperature-programmed reduction, and FTIR and M?ssbauer spectroscopy were used for their characterization. The samples' catalytic behavior in methanol decomposition was also studied. The physicochemical and catalytic properties of the obtained materials (Fe/UDD) were compared with those of other iron-oxide-modified mesoporous supports with different nature and functionality (MCM-48 silica and CMK-1 carbon). The highest catalytic activity and stability was achieved with air-pretreated Fe/UDD.     

Bubble colloidal AFM probes formed from ultrasonically generated bubbles

Here we introduce a simple and effective experimental approach to measuring the interaction forces between two small bubbles (approximately 80-140 microm) in aqueous solution during controlled collisions on the scale of micrometers to nanometers. The colloidal probe technique using atomic force microscopy (AFM) was extended to measure interaction forces between a cantilever-attached bubble and surface-attached bubbles of various sizes. By using an ultrasonic source, we generated numerous small bubbles on a mildly hydrophobic surface of a glass slide. A single bubble picked up with a strongly hydrophobized V-shaped cantilever was used as the colloidal probe. Sample force measurements were used to evaluate the pure water bubble cleanliness and the general consistency of the measurements.     

Blue-colored donor-acceptor [2]rotaxane

[reaction: see text] A guest molecule-a bis-N-tetraethyleneglycol-substituted 3,3'-difluorobenzidine derivative-has been synthesized, and its complexation with the host, cyclobis(paraquat-p-phenylene), has been investigated. This host-guest complex was then employed in the template-directed synthesis of a blue-colored [2]rotaxane. The color of this [2]rotaxane arises from the charge-transfer absorption band between the HOMO of the guest and the LUMO of the host. This host-guest complex, and the derived [2]rotaxane, completes the donor-acceptor-based RGB (red/green/blue) color complex set.