“Surface water” and “strong-bonded water” in cyclodextrins: a Karl Fischer titration approach

Cyclodextrins are some of the most used carriers for bioactive compounds (as host–guest complex) and many factors influence the association–dissociation of this complex, some of them being related to hydrophobicity. In the solid state, cyclodextrins contain two types of water molecules: “surface” water molecules (especially close to the crystal surface) and “strong-bonded” water molecules (especially from the cyclodextrin cavity), but the classification is hard to do, and the concentration of these water molecules are relatively difficult to estimate by simple methods. In the present study we used the volumetric Karl Fischer titration to estimate these types of water molecules in cyclodextrins by means of the rate of water reaction (related to diffusion from cyclodextrin crystals). “Surface” water molecules are titrated with rates between 1.8–2.8 mM/s for α-cyclodextrin, while for β-cyclodextrin these rates are little bit higher (2.9–3.4 mM/s). The rates corresponding to “strong-bonded” water molecules are approximately tens fold lower (0.05–0.3 mM/s for α-cyclodextrin and 0.15–0.33 mM/s for β-cyclodextrin). The approximate ratio between “surface” and “strong-bonded” water molecules could also be estimated by this simple and rapid method.     

Invariance for stochastic differential systems with time-dependent constraining sets

The first part of this article presents invariance criteria for a stochastic differential equation whose state evolution is constrained by time-dependent security tubes. The key results of this section are derived by considering an equivalent problem where the square of distance function represents a viscosity solution to an adequately defined partial differential equation. The second part of the paper analyzes the broader context when solutions are constrained by more general time-dependent convex domains. The approach relies on forward stochastic variational inequalities with oblique reflection, the generalized subgradients acting as a reacting process that operates only when the solution reaches the boundary of the domain.     

Synthesis and antibacterial properties of new phenothiazinyl- and phenyl-nitrones

The synthesis of new phenothiazinyl- and phenyl-nitrones under classical versus microwave heating conditions is described. Better yields were obtained under microwave irradiation in the condensation reactions of phenothiazyl-carbaldehyde with hydroxylamine derivatives. The structures of the new phenothiazinyl-nitrones were assigned on the basis of MS, FT–IR and NMR spectra. The new nitrones and some known phenyl-nitrones were screened for their antibacterial and antifungal activity against several Candida species, Gram negative bacteria, such as E. coli, Citrobacter spp, Morganella spp, Pseudomonas aeruginosa, Klebsiella pneumoniae (± ESBL), Proteus spp, Acinetobacter spp and the Gram positive bacterium Staphylococcus aureus, with moderate results.     

Removal of zinc ions as zinc chloride complexes from strongly acidic aqueous solutions by ionic exchange

The aim of this study was to compare several anion exchangers and to investigate the capacity of Amberlite IRA410 to remove zinc as chloride [ZnCl₃]^? from hydrochloric solutions (1 M). Influence of the process parameters such as stirring rate, resin quantity and zinc initial concentration over the removal process, was considered. The highest experimental ionic exchange capacity between the considered anionic exchangers, in the same working conditions (500 rpm, 5 g resin and 500 mg L^?1), was obtained for Amberlite IRA410, 8.34 mg g^?1. With an increase of zinc ions concentration, ionic exchange capacity increased up to 19.31 mg g^?1 (1100 mg L^?1). The experimental data were analysed using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich isotherm models. The results were also analyzed using sorption kinetics models, pseudo-first-, pseudo-second-order, intra-particle and film diffusion models. From the Dubinin-Radushkevich and Temkin isotherm models the mean free energy and heat of sorption were calculated to be 7.45 kJ mol^?1, respectively 1×10^?4 kJ mol^?1, which indicates that zinc sorption is characterized by a physisorption process. Kinetic studies showed that the adsorption followed a pseudo-second-order kinetic model.     

Glass foam from window panes and bottle glass wastes

Glass foams are building materials that now compete with classic insulating polymeric and fiber materials for thermal enveloping. The low flammability, high chemical durability and thermal stability are distinct advantages over polymeric materials. The present paper proposes the possibility of producing glass foam using two types of recycled glass wastes (window panes and bottle glass) together with plaster wastes from used ceramic casting molds as foaming agent. Optical microscopy, measurements of apparent porosity and density, hydrolytic and chemical stability, as well as thermal conductivity were used in order to characterize the obtained glass foams as insulator materials for the building industry. The apparent porosity of glass foams ranges between 20.19–54.54% when using window glass wastes, and 18.77–51.75% with bottle glass wastes. Thermal conductivity was less than 0.25 W mK-1 for all the studied glasses. The obtained results confirm that there exists an alternative method for producing glass foams, for example, from glass wastes and used ceramic plaster molds, which are utilized as foaming agents with good chemical stability and insulating properties.     

Study of thermal behaviour of some edible mushrooms

This paper is aimed to analyse the thermal behaviour in air of edible mushrooms through nonisothermal (TG, DTG, DTA) and calorimetric (Berthelot calorimeter) methods. The studied mushrooms were Pleurotus ostreatus spontaneously grown and from culture and Agaricus bisporus from culture, currently used in alimentation but insufficiently investigated from this point of view. The analysis of TG–DTG–DTA curves has indicated that the degradation mechanism is complex and characteristic to every species and major differences between the cap and the stipe of investigated mushrooms have not been recorded. These species are thermally stable in the range of 30–160 °C. The thermal stability in terms of initial degradation temperature (T _i °C) and the temperature corresponding to the conversion grade (T _α=0.03 °C) indicate that the stipe has a thermal stability close to the cap one and that the cultivated mushrooms are more thermally stable than those spontaneously grown. The obtained results concerning the combustion of the sample using Berthelot calorimeter are in accordance with the TG–DTG–DTA analysis. The residue obtained is a measure of the mineral content and is quantitatively close.     

Studies on thermal,spectral, magnetic and biological properties of new Ni(II), Cu(II) and Zn(II) complexes with a bismacrocyclic ligand bearing an aromatic linker

Novel complexes of M₂LCl₄·nH₂O type (M:Ni, n = 4; M:Cu, n = 3 and M:Zn, n = 0; L: ligand resulted from 1,4-phenylenediamine, 3,6-diazaoctane-1,8-diamine and formaldehyde one-pot condensation) were synthesized and characterised by microanalytical, ESI–MS, IR, UV–Vis, ¹H NMR and EPR spectra, magnetic data at room temperature and molar conductivities as well. The electrochemical behaviour of complexes was investigated by cyclic voltammetry. Simultaneous TG/DTA measurements were performed in order to evidence the thermal behaviour of the obtained complexes. Processes such as water elimination, fragmentation and oxidative degradation of the organic ligand as well as chloride elimination occurred during thermal decomposition. The antimicrobial assays demonstrate that the compounds exhibited good antibacterial activity, especially against S. aureus and E. coli strains, the most active being the copper(II) complex, which also exhibited the most prominent anti-biofilm effect, suggesting its potential use for the development of new antimicrobial agents. The biological activity was correlated with log P _ow values. All complexes disrupt the membrane integrity of HCT 8 tumour cells.     

Thermal behaviour of some novel antimicrobials based on complexes with a Schiff base bearing 1,2,4-triazole pharmacophore

A series of complexes of type [ML(CH₃COO)(OH₂)₂] (M: Co, Ni; HL: 2-[(E)-1H-1,2,4-triazol-3-ylimino)methyl]phenol)) and [M₂L₂(CH₃COO)₂(OH₂)_n] (M: Cu, n = 2; M: Zn, n = 0) were synthesised by template condensation. The compounds were characterised with microanalytical, ESI–MS, IR, electronic, EPR spectra and magnetic data at room temperature. Based on the IR and ESI–MS spectra, a dinuclear structure with the acetate as bridge was proposed for Cu(II) and Zn(II) complexes. The dinuclear structure of Cu(II) complex is also consistent with both magnetic behaviour and EPR spectrum. The thermal analyses have evidenced processes as water elimination, acetate decomposition, as well as oxidative degradation of the Schiff base. The final decomposition product was the most stable metal oxide as indicated by powder X-ray diffraction. The cobalt and copper compounds exhibited a broad spectrum of antibacterial activity towards both planktonic and biofilm-embedded cells. The complexes exhibit a low cytotoxicity except for Cu(II) species that induces the early apoptosis for the HEp 2 cells.     

Solvent‐Dependent Cation Exchange in Metal–Organic Frameworks

We investigated which factors govern the critical steps of cation exchange in metal–organic frameworks by studying the effect of various solvents on the insertion of Ni²⁺ into MOF‐5 and Co²⁺ into MFU‐4l. After plotting the extent of cation insertion versus different solvent parameters, trends emerge that offer insight into the exchange processes for both systems. This approach establishes a method for understanding critical aspects of cation exchange in different MOFs and other materials.