Formal total synthesis of β-pipitzol

(±)-$\text{O}$-methylperezone ($\text{1b}$) was obtained by selective oxidative demethylation of (±)-leucoperezone trimethyl ether ($\text{4a}$). Compound ($\text{4a}$) was prepared by condensation of 2,3,5-trimethoxytoluene ($\text{5e}$) with 6-methyl-5-hepten-2-one, followed by reductive removal of the tertiary alcohol. The aromatic precursor $\text{5e}$ was prepared in four steps from 2,3-dimethoxytoluene ($\text{5a}$) and, alternatively, in three steps from 5-bromoveratraldehyde ($\text{6a}$). Racemic $\text{1b}$ and $\text{4a}$ were directly compared with the optically active molecules prepared from natural R(-)-perezone ($\text{1a}$).     

Fused Mesoionic Heterocycles: Synthesis of 1,2,4-triazolo(4,3-b)-1,2,4-triazole derivatives

A number of mesoionic compounds derivatives of the bicyclic system 1,2,4-triazolo(4,3-b)-1,2,4-triazole have been prepared from 4-amino-1-methyl-3,5-bis(methylthio)-1,2,4-triazolium iodide and aryl isothiocyanates.     

NMR chemical shifts in the low–pH form of a-chymotrypsin. A QM/MM and ONIOM–NMR study

 The relationship between hydrogen bonding and NMR chemical shifts in the catalytic triad of low-pH α-chymotrypsin is investigated by combined use of the effective fragment potential [(2001) J Phys Chem A 105:293] and ONIOM–NMR [(2000) Chem Phys Lett 317:589] methods. Our study shows that while the His57 N^δ1−H bond is stretched by a relatively modest amount (to about 1.060 ?) this lengthening, combined with the polarization due to the molecular environment, is sufficient to explain the experimentally observed chemical shifts of 18.2 ppm. Furthermore, the unusual down-field shift of H^ɛ1 (9.2 ppm) observed experimentally is reproduced and shown to be induced by interactions with the C=O group of Ser214 as previously postulated. The free-energy cost of moving H^δ1 from His57 to Asp102 is predicted to be 5.5 kcal/mol. Received: 26 September 2001 / Accepted: 6 September 2002 / Published online: 21 January 2003 Contribution to the Proceedings of the Symposium on Combined QM/MM Methods at the 222nd National Meeting of the American Chemical Society, 2001 Correspondence to: J. H. Jensen e-mail: jan-jensen@uiowa.edu Acknowledgements. This work was supported by a Research Innovation Award from the Research Corporation and a type G starter grant from the Petroleum Research Fund. The calculations were performed on IBM RS/6000 workstations obtained through a CRIF grant from the NSF (CHE-9974502) and on supercomputers at the National Center for Supercomputer Applications at Urbana-Champaign. The authors are indebted to Visvaldas Kairys for help with the CHARMM program, and to Daniel Quinn for many helpful discussions.     

Halonickel(I) complexes

Summary The reduction of nickel(II) halides with NaBH₄ in the presence of different ligands, L=PPh₃, AsPh₃, SbPh₃, has been studied. With a molar ratio L/Ni=3, new complexes NiX(SbPh₃)₃, X=Cl, Br, I, were obtained. With a molar ratio L/Ni=2, dimeric species [NiXL₂]₂, X=Cl, Br, I; L=PPh₃, AsPh₃, SbPh₃, were isolated. They are unstable and decompose easily in the solid and rapidly in solution, so that pure samples were only identified for X=Cl, L=PPh₃, AsPh₃, SbPh₃; X=Br, L=PPh₃ and X=I, L=PPh₃. With a molar ratio L/Ni=1, complexes [NiXL]_n (probably polymeric) were obtained. They are very unstable and pure samples could only be isolated when X=Cl, L=PPh₃. Impure substances containing variable amounts of decomposition products were obtained in all the remaining cases. The chemical and structural behaviour of these complexes is discussed.     

Synthesis and structure of chiral-at-metal complexes with the ligand (S)-2-[(Sp)-2-(diphenylphosphino)ferrocenyl]-4-isopropyloxazoline

Half-sandwich complexes of formula [(ηⁿ-ring)MClL]PF₆ [L = (S)-2-[(S_p)-2-(diphenylphosphino)ferrocenyl]-4-isopropyloxazoline; (ηⁿ-ring)M = (η⁵-C₅Me₅)Rh; (η⁵-C₅Me₅)Ir; (η⁶-p-MeC₆H₄iPr)Ru; (η⁶-p-MeC₆H₄iPr)Os] have been prepared and spectroscopically characterised. The molecular structures of the rhodium and iridium compounds have been determined by X-ray crystallography. The related solvate complexes [(η⁵-C₅Me₅)ML(Me₂CO)]²⁺ (M = Rh, Ir) are active catalysts for the Diels-Alder reaction between methacrolein and cyclopentadiene.     

Chemical preparation of conductive elastomeric blends: Polypyrrole/EPDM. I. Oxidant particle-size effect

This work describes the preparation of polypyrrole and EPDM rubber blends, PPy/EPDM, by the sorption of pyrrole (vapor phase) in an EPDM matrix containing CuCl₂. We investigated the effect of the oxidant particle-size on the sorption and polymerization equilibrium, electrical conductivity, and mechanical properties of the blends. Independently of the CuCl₂ concentration and polymerization time, the polypyrrole weight fraction in the blend, X_ppy, increases when the oxidant particle-size in changed from 150–250 μm to smaller than 106 μm. For blends containing 50 phr of CuCl₂, obtained following 72 h of exposure to pyrrole, an increase in the Young's Modulus (from 2.2 ± 0.2 to 3.9 ± 0.6 MPa) and an increase in the electrical conductivity (from 10^?9 to 10^?7 S cm^?1) was observed when the oxidant particle-size was decreased. Infrared spectroscopy, thermogravimetric analysis, scanning differential calorimetry, and scanning electron microscopy were used in sample characterization. © 1994 John Wiley & Sons, Inc.     

N,N'-ethylenebis(pyridoxylideneiminato) and N,N'-ethylenebis(pyridoxylaminato): synthesis, characterization, potentiometric, spectroscopic, and DFT studies of their vanadium(IV) and vanadium(V) complexes

The Schiff base N,N'-ethylenebis(pyridoxylideneiminato) (H(2)pyr(2)en, 1) was synthesized by reaction of pyridoxal with ethylenediamine; reduction of H(2)pyr(2)en with NaBH(4) yielded the reduced Schiff base N,N'-ethylenebis(pyridoxylaminato) (H(2)Rpyr(2)en, 2); their crystal structures were determined by X-ray diffraction. The totally protonated forms of 1 and 2 correspond to H(6)L(4+), and all protonation constants were determined by pH-potentiometric and (1)H NMR titrations. Several vanadium(IV) and vanadium(V) complexes of these and other related ligands were prepared and characterized in solution and in the solid state. The X-ray crystal structure of [V(V)O(2)(HRpyr(2)en)] shows the metal in a distorted octahedral geometry, with the ligand coordinated through the N-amine and O-phenolato moieties, with one of the pyridine-N atoms protonated. Crystals of [(V(V)O(2))(2)(pyren)(2)].2 H(2)O were obtained from solutions containing H(2)pyr(2)en and oxovanadium(IV), where Hpyren is the "half" Schiff base of pyridoxal and ethylenediamine. The complexation of V(IV)O(2+) and V(V)O(2) (+) with H(2)pyr(2)en, H(2)Rpyr(2)en and pyridoxamine in aqueous solution were studied by pH-potentiometry, UV/Vis absorption spectrophotometry, as well as by EPR spectroscopy for the V(IV)O systems and (1)H and (51)V NMR spectroscopy for the V(V)O(2) systems. Very significant differences in the metal-binding abilities of the ligands were found. Both 1 and 2 act as tetradentate ligands. H(2)Rpyr(2)en is stable to hydrolysis and several isomers form in solution, namely cis-trans type complexes with V(IV)O, and alpha-cis- and beta-cis-type complexes with V(V)O(2). The pyridinium-N atoms of the pyridoxal rings do not take part in the coordination but are involved in acid-base reactions that affect the number, type, and relative amount of the isomers of the V(IV)O-H(2)Rpyr(2)en and V(V)O(2)-H(2)Rpyr(2)en complexes present in solution. DFT calculations were carried out and support the formation and identification of the isomers detected by EPR or NMR spectroscopy, and the strong equatorial and axial binding of the O-phenolato in V(IV)O and V(V)O(2) complexes. Moreover, the DFT calculations done for the [V(IV)O(H(2)Rpyr(2)en)] system indicate that for almost all complexes the presence of a sixth equatorial or axial H(2)O ligand leads to much more stable compounds.     

Modification of the luminescence properties of an Europium(III) Tris(β-diketonate) Complex by Inclusion in γ-cyclodextrin and 2,3,6-trimethyl-γ-cyclodextrin

A 1:1 inclusion compound between octakis(2,3,6-tri-O-methyl)-γ-cyclodextrin (TRIMEG) and the chelate complex Eu(NTA)₃·2H₂O (NTA=1-(2-naphthoyl)-3,3,3-trifluoroacetonate) was prepared and characterized by powder X-ray diffraction, thermogravimetric analysis and photoluminescence spectroscopy. The results were compared with those obtained for the corresponding native γ-CD adduct. Excitation and emission spectra were measured, and the lifetimes were determined for the Eu³⁺ first excited state (⁵D₀). The results indicate the presence of only one low-symmetry environment for the Eu³⁺ cations in the inclusion compounds. Encapsulation of the Europium complex in the two CDs increases the quantum efficiency of the ligand-to-metal energy transfer pathway, but the efficiency of the Eu³⁺ sensitization was significantly higher with TRIMEG as the host molecule. This may be related with the observation that the two hosts appear to have different influences on the Eu³⁺ coordination environments for the guest molecule.     

A ferrocene-based heteroditopic ligand for electrochemical sensing of cations and anions

A ferrocene-based heteroditopic receptor containing urea and crown ether units shows electrochemical responses to dihydrogenphosphate and fluoride anions. K+ cations can only be detected in the presence of dihydrogenphosphate.     

Capillary electrophoretic determination of triamterene, methotrexate, and creatinine in human urine

A capillary zone electrophoresis (CZE) method using a fused-silica capillary (60.2 cm x 75 microm ID) was investigated for the determination of triamterene (TRI), methotrexate (MTX), and creatinine (CREA) in human urine. The separation was performed using a hydrodynamic injection time of 7 s (0.5 psi), a voltage of 25 kV, a capillary temperature of 30 degrees C, and 40 mM phosphoric acid adjusted to pH 2.25 by addition of triethanolamine as separation electrolyte. Under these conditions, analysis takes about 15 min. A linear response over the 0.5-15.0 mg L(-1) concentration range was found for TRI and MTX, and 0.5-80.0 mg L(-1) for CREA. Dilution of the sample (water:urine, 1:1 for TRI and MTX, and 1:25 for CREA determination) was the only step necessary prior to analysis by electrophoresis. The developed method is easy, rapid, and sensitive and has been applied to determine triamterene,methotrexate, and creatinine in urine samples with satisfactory results.