Comparison of different sample preparation treatments for the analysis of wine phenolic compounds in human plasma by reversed phase high-performance liquid chromatography

Phenolic compounds are common constituents of wine. Due to their healthy properties the analysis in human fluids is interesting within bioavailability evaluation. They have been reported not to be stable in human plasma, particularly at room temperature. Most sample treatments have been reported for a single compound. Our aim in this paper is to study sample handling control conditions and improve phenolic stability in human plasma samples. We tested various sample treatments to determine whether they could be used for analysing a set of phenolic compounds usually present in wines.The compounds studied were six phenolic acids, five flavonoids, trans-resveratrol and tyrosol. The effect of the following factors was explored: temperature, pH, the addition of antioxidants and the addition of anticoagulants.The results suggest that the plasma samples should be kept at temperatures below −20 °C before analysis and that 1% ascorbic acid plus 10 μl/ml o-phosphoric acid should be added. Anticoagulants (heparin or EDTA) do not play a significant role in the stability of polyphenolic compounds.The recovery values of a number of sample treatments (solid phase extraction, extraction with methanol, deproteinization, inhibition of enzymatic plasma activity) were compared. The recovery values for most phenolic compounds were better if the enzymatic plasma activity was inhibited and acidified ethanol was used for deproteinization.     

A short synthesis of C-glycosyl pyrazoles and pyrroles

The sodium salt of TOSMIC reacted with (E)-3,4,5,6,7-penta-O-acetyl-1,2-dideoxy-1-C-nitro-D-galacto- (1) and -D-manno-hept-1-enitol (2) to give 3-(D-galacto- (3) and 3-(D-manno-penta-O-acetylpentitol-1-yl)-4-nitropyrrole (4) , respectively. Compound 1 reacted with diaryl nitrile imines, affording 1,3-diaryl-4-(1,2,3,4,5-penta-O-acetyl-D-galacto-pentitol-1-yl)pyrazoles 5 and 6 .     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 1. Voltammetric e-tongue for the determination of oxidizable compounds

A sequential injection analysis (SIA) system was developed with the aim of obtaining an automatic and versatile way to prepare standards needed in the study of systems with higher dimensional sensor signals. To illustrate this, different analytical techniques were used in determinations of several analytes. Automated potentiometric calibrations of different potentiometric sensors, with and without interference, were carried out. Useful determinations of selectivity coefficients with two degrees of freedom were obtained. Simultaneous voltammetric determinations have also been done. Firstly, simultaneous determinations of lead and cadmium, using epoxy-graphite composite as the working electrode, have enabled a separate calibration for each metal to be obtained. Next, a voltammetric electronic tongue was designed and applied to the determination of oxidizable species. The use of artificial neural networks has solved the overlapped signal of ascorbic acid, 4-aminophenol and 4-acetamidophenol (paracetamol). A set of 63 data points was prepared automatically and has facilitated the training of an electronic tongue for these three analytes. Accurate predictions of test solutions, in the range of 12–410 μM for ascorbic acid, 17–530 μM for 4-aminophenol and 10–420 μM for paracetamol, have been achieved with RMSEs lower than 0.10 μM.     

All-solid-state potentiometric sensors sensitive to nonionic surfactants based on ionophores containing ethoxylate units

Earlier work of potentiometric Ion-selective electrodes (ISEs) sensitive to nonionic surfactants of the polyethoxylate type is further extended. The ISEs constructed were all-solid-state sensors with plasticized PVC membranes. The sensing material was a tetraphenylborate salt of the barium complex with a polyethoxylate nonionic surfactant. As membrane component, the combinations of two polyethoxylates of the nonylphenoxy type, which differed in the number of oxyethylene units (5 or 12), and two different plasticizers, (o-nitrophenyloctyl ether and o-nitrophenylphenyl ether), were tested. The response of these electrodes to different nonionic surfactants and the interference effect of several species has been evaluated. For all the types of tested electrodes, the sensitivities shown were ca. 30.0 mV dec(-1) and the limit of detection, ca. 10(-5) M, when a nonylphenoxyde with 12 oxyethylene units was used as standard. The membrane with the best response characteristics was then applied in potentiometric titrations of this kind of surfactants in the presence of Ba(2+) ion and using tetraphenylborate as the titrant.     

Activation of the carbon—nitrogen triple bond of benzonitrile in the presence of triosmium clusters and acetic acid. Crystal structure of (μ-H)Os3(CO)10(μ-O2CCH3), a product of the reaction

The activation of the CN triple bond of benzonitrile in the presence of acetic acid and of Os₃(CO)₁₂ or H₂Os₃(CO)₁₀ has been studied. When Os₃(CO)₁₂ reacts with PhCN and acetic acid in refluxing n-octane the three main products are (μ-H)Os₃(CO)₁₀(μ-O₂CCH₃) (I), (μ-H)Os₃(CO)₁₀(μ-NCHPh) (II) and (μ-H)Os₃(CO)₁₀(μ-NHCH₂Ph) (III); II and III are analogues of (μ-H)Ru₃(CO)₁₀(μ-NCHPh) and (μ-H)Ru₃(CO)₁₀(μ-NHCH₂Ph) obtained from PhCN, Ru₃(CO)₁₂ or H₄Ru₄(CO)]₁₂, and acetic acid. In contrast to the reaction with ruthenium clusters, Os₃(CO)₁₂ and H₂Os₃(CO)₁₀ also give the adduct Os₃(CO)₁₀(CH₃COOH) (I). The structure of I has been fully elucidated by X-ray diffraction. Crystals of I are monoclinic, space group P2₁/m, with unit cell parameters a 7.858(6), b 12.542(8), c 9.867(6) Å, β 109.92(2)°, Z = 2. In I an edge of the triangular cluster of osmium atoms is doubly bridged by a hydride and an acetate ligand. Ten terminal carbonyl groups are bonded to the metal atoms.     

Study of reactive ion etching of Si and SiO2 for CFxCl4−x gases

A parametric study of the etching of Si and SiO₂ by reactive ion etching (RIE) was carried out to gain a better understanding of the etching mechanisms. The following fluorocarbons (FCs) were used in order to study the effect of the F-to-Cl atom ratio in the parent molecule to the plasma and the etching properties: CF₄, CF₃Cl, CF₂Cl₂, and CFCl₃ (FC-14, FC-13, FC-12, and FC-11 respectively). The Si etch rate uniformity across the wafer as a function of the temperature of the wafer and the Si load, the optical emission as a function of the temperature of the load, the etch rate of SiO₂ as a function of the sheath voltage, and the mass spectra for each of the FCs were measured. The temperature of the wafer and that of the surrounding Si load strongly influence the etch rate of Si, the uniformity of etching, and the optical emission of F, Cl, and CF₂. The activation energy for the etching reaction of Si during CF₄ RIE was measured. The etch rate of Si depends more strongly on the gas composition than on the sheath voltage; it seems to be dominated by ion-assisted chemical etching. The etching of photoresist shifted from chemical etching to ion-assisted chemical etching as a function of the F-to-Cl ratio and the sheath voltage. The etch rate of SiO₂ depended more strongly on the sheath voltage than on the F-to-Cl ratio.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 2. Potentiometric e-tongue for the determination of alkaline ions

An intelligent, automatic system based on an array of non-specific-response chemical sensors was developed. As a great amount of information is required for its correct modelling, we propose a system generating it itself. The sequential injection analysis (SIA) technique was chosen as it enables the processes of training, calibration, validation and operation to be automated simply. Detection was carried out using an array of potentiometric sensors based on PVC membranes of different selectivity. The diluted standard solutions needed for system learning and response modelling are automatically prepared from more concentrated standards. The electrodes used were characterised with respect to one and two analytes, by means of high-dimensionality calibrations, and the response surface of each was represented; this characterisation enabled an interference study of great practical utility. The combined response was modelled by means of artificial neural networks (ANNs), and thus it was possible to obtain an automated electronic tongue based on SIA. In order to identify the ANN which provided the best model of the electrode responses, some of the network's parameters were optimised and its usefulness in determining NH₄⁺, K⁺ and Na⁺ ions in synthetic samples was then tested. Finally, it was used to determine these ions in commercial fertilisers, the obtained results being compared with reference methods.     

Voltammetric studies of the interaction between lead metal ion and the methyl parathion pesticide

Journal of Solid State Electrochemistry - In this work, the interaction of the pesticide methyl parathion (MP) with the lead metal ion was evaluated using a carbon electrode reused from a zinc...