PAN composite membrane with different solvent affinities controlled by surface modification methods

Polyacrylonitrile (PAN) composite membranes with surface properties designed by either a chemical modification with ethylenediamine (EDA), or layer‐by‐layer (LbL) polyelectrolyte adsorption were investigated in this paper. Fourier‐transformed infrared (FTIR) spectroscopy and streaming potential measurements showed that the first step of the reaction with EDA in gas phase was the formation of ammonium salts with the reactive carboxylic groups present on the surface of the starting membrane. Part of the ammonium carboxylate groups was transformed in secondary amide linkages by a heat‐induced reaction. Poly(sodium styrenesulfonate) (NaPSS) and a polycation containing about 95 mol % of N,N‐dimethyl‐2‐hydroxypropyleneammonium chloride units in the backbone (PCA₅) were used as opposite polyions in the LbL film construction. The adsorbed polyion amount per every layer was controlled by the nature and concentration of the supporting electrolyte in polyelectrolyte deposition solution (NaBr and KBr). An almost linear increase of the adsorbed polyion amount versus the layer pair number was observed. The swelling degree (SD) in pure alcohols of the LbL‐modified PAN composite membrane decreased with the increase of the solvent polarity and with the decrease of the pore volume by pore filling with polyelectrolyte complex multilayer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4161–4171, 2005     

3D electrogenerated chemiluminescence: from surface-confined reactions to bulk emission

Among luminescence techniques, electrogenerated chemiluminescence (ECL) provides a unique level of manipulation of the luminescent process by controlling the electrochemical trigger. Despite its attractiveness, ECL is by essence a 2D process where light emission is strictly confined to the electrode surface. To overcome this intrinsic limitation, we added a new spatial dimension to the ECL process by generating 3D ECL at the level of millions of micro-emitters dispersed in solution. Each single object is addressed remotely by bipolar electrochemistry and they generate collectively the luminescence in the bulk. Therefore, the entire volume of the solution produces light. To illustrate the generality of this concept, we extended it to a suspension of multi-walled carbon nanotubes where each one acts as an individual ECL nano-emitter. This approach enables a change of paradigm by switching from a surface-limited process to 3D electrogenerated light emission.     

Poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanosphere. Part 2: Simultaneous release of a drug and a prodrug (clindamycin and clindamycin phosphate)

The novel concept of a simultaneous, controlled release of a drug and a prodrug with different physico-chemical properties was applied in order to prolong the release period of antibiotics and estimate their high local concentrations, which are the necessary preconditions for the treatment of some chronic infection diseases. For this purpose poly(D,L-lactide-co-glycolide)/hydroxyapatite (PLGA/HAp) core-shell nanostructures were used as the carrier of clindamycin-base, as a drug, and clindamycin-2-phosphate, as a prodrug model. As a result, a two-step release was observed: the controlled release of the more soluble phosphate form and the sustained release of the less-soluble base form of clindamycin, resulting in a high overall concentration of the released drug during the period of 30 days in vitro. The HAp phase within the PLGA core-shells, applied as a drug carrier, delayed the process of the degradation of the polymer; however, the presence of the drug affected the process of degradation and this influence was the dominant factor in the control over the degradation of the polymer phase of PLGA/HAp and the consequent kinetics of the drug release.     

Poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres. Part 3: properties of hydroxyapatite nano-rods and investigation of a distribution of the drug within the composite

A step-by-step analysis of the formation and the drug loading of the poly(D,L-lactide-co-glycolide)/hydroxyapatite (PLGA/HAp) composite was carried out in a perspective of the following parameters: the structure, the morphology and the adsorption/desorption properties of the composite's bioceramic part. The authors demonstrated the importance of the material's capacity to form a fine dispersion of solid HAp particles, as an initial step, for the further loading of the drug and for the formation of the core-shell structures. The nanometer-sized rods of HAp have the capacity of ensuring a rapid adsorption and a controlled desorption of the drug from their surface, and they can act as a nucleating site for the formation of polymeric cores. Each component of this material was labeled with fluorescence dye, which enabled an insight into the distribution of the components in the core-shells that were obtained as the final outcome. Such an analysis showed a high level of uniformity among the cores enclosed within polymeric shells. From a practical perspective, the labeling of each component of the composite can be regarded as an additional functionality of the material: labeling can enable us to monitor its action during the healing process. This ability to be easily detected is expected to enhance the procedure for the controlled delivery of antibiotics after their local implantation of carriers loaded with the antibiotic and to provide more careful control over this process.     

Green light radiation effects on free radicals inhibition in cellular and chemical systems

Free radicals generation is inhibited through green light (GL) irradiation in cellular systems and in chemical reactions. Standard melanocyte cultures were UV-irradiated and the induced cellular reactive oxygen species (ROS) were quantified by the fluorescence technique. The same cell cultures, previously protected by a 24h GL exposure, displayed a significantly lower ROS production. A simple chemical reaction is subsequently chosen, in which the production of free radicals is well defined. Paraffin wax and mineral oil were GL irradiated during thermal degradation and the oxidation products checked by chemiluminescence [CL] and Fourier transform infrared spectra [FT-IR]. The same clear inhibition of the radical oxidation of alkanes is recorded. A quantum chemistry modeling of these results is performed and a mechanism involving a new type of Rydberg macromolecular systems with implications for biology and medicine is suggested.     

Simultaneous Determination of Pb and Cd Traces in Water Samples by Anodic Stripping Voltammetry Using a Modified GC Electrode

The determination of Pb and Cd with a Nafion‐modified glassy carbon electrode and Cu‐DPABA complex (Cu‐DPABA–NA/GCE; DPABA is methyl 3,5‐bis{bis‐[(pyridin‐2‐yl)methyl]amino}methyl‐benzoate) as an alternative electrode for anodic stripping voltammetry was described. Pb and Cd were accumulated in acetate buffer pH 4 at a potential of ?1.4 V (vs. Ag/AgCl electrode) for 120 s followed by a DPASV scan from ?1.2 to ?0.2 V. Under optimum conditions the calibration curves were linear in the range of 4.8×10^?9–5.0×10^?5 and 5.0×10^?9–5×10^?5 mol L^?1 for Pb and Cd, respectively. Detection limits were 1.8×10^?9 and 1.2×10^?9 mol L^?1 for Pb and Cd, respectively. Different parameters and conditions, such as membrane ingredients, accumulation time, potential and pH value were optimized. A study of interfering substances was also performed. A significant increase in current was achieved at the modified electrode in comparison with the bare glassy carbon electrode. The validation of the proposed method was made by Pb and Cd determination in the certified reference material Groundwater CRM 610 (BCR, Community Bureau of Reference, Brussels, Belgium). The electrode was successfully applied for determination of Pb and Cd in river water with a high content of organic contaminants without any pretreatment.     

Sturm theorems for second order linear nonhomogenous differential equations and localization of zeros of the solution

It is shown that Sturm theorems, formulated in the 1830??s ([1], [2], [3] and [4]) and valid for second order linear homogeneous differential equation L(y)??y??+a(x)y??+b(x)y=0, could as well be formulated for the class of nonhomogeneous linear differential equations L(y)=f(x). Criteria for the existence of oscillatory solutions of nonhomogeneous equations, as well as more exact locations of the zeros are given.