An Approximate Kinetic Treatment of Slow‐Initiated Living Polymerization. I. First‐Order Initiation and Propagation

A new method for deriving the initiation rate constant for a slowinitiated living polymerization process in which all reactions are first order with respect to all participants is presented. The method is based upon an approximate analytical solution of the set of differential equations modeling this class of processes. The solution is found by asymptotic expansion of the unknown functions, using a dimensionless parameter which characterizes the process.     

Combustion-synthesized sodium manganese (cobalt) oxides as cathodes for sodium ion batteries

We report on the electrochemical properties of layered manganese oxides, with and without cobalt substituents, as cathodes in sodium ion batteries. We fabricated sub-micrometre-sized particles of Na_0.7MnO_2?+?z and Na_0.7Co_0.11Mn_0.89O_2?+?z via combustion synthesis. X-ray diffraction revealed the same layered hexagonal P2-type bronze structure with high crystallinity for both materials. Potentiostatic and galvanostatic charge/discharge cycles in the range 1.5–3.8 V vs. Na | Na⁺ were performed to identify potential-dependent phase transitions, capacity, and capacity retention. After charging to 3.8 V, both materials had an initial discharge capacity of 138 mA?h?g^?1 at a rate of 0.3 C. For the 20th cycle, those values reduced to 75 and 92 mA?h?g^?1 for Co-free and Co-doped samples, respectively. Our findings indicate that earlier works probably underestimated the potential of (doped) P2-type Na_0.7MnO_2?+?z as cathode material for sodium ion batteries in terms of capacity and cycle stability. Apart from doping, a simple optimization parameter seems to be the particle size of the active material.     

A systematic assessment of the variability of matrix effects in LC-MS/MS analysis of ergot alkaloids in cereals and evaluation of method robustness

The study presents for the first time a systematic investigation of matrix effects in the LC-MS/MS analysis of ergot alkaloids in cereals. In order to assure the accuracy of the results, several approaches to minimize/eliminate matrix effects were investigated including variation of ionization techniques, chromatography and sample preparation on different grain types and grain varieties. It was revealed that the use of UPLC and careful choice of sample preparation might reduce signal suppression/enhancement. In general, ergometrine was found to be the most susceptible among the ergot alkaloids studied, but none of the used approaches suggested a total elimination of matrix effects; only less than half of its MS signal could be recovered. The late-eluting compounds were less affected by matrix components in all conditions tested. Further, the robustness of the applied LC-MS method was checked by means of a fractional factorial design. The results indicate that small changes to the sample preparation parameters, namely pH and concentration of extraction buffer, shaking time, drying temperature and extraction volumes, did not significantly (α?=?0.05) affect the recoveries of ergot alkaloids.

Interaction of 1,3,2,4‐Benzodithiadiazines with Aromatic Phosphines and Phosphites

Although an interaction between hydrocarbon and fluorocarbon 1,3,2,4‐benzodithiadiazines ( 1 ) and P(C₆H₅)₃ continuously produces chiral 1,2,3‐benzodithiadiazol‐2‐yl iminophosporanes ( 2 ; in this work, 5,7‐difluoro derivative 2a ) via 1:1 condensation, an interaction between 1 and other PR₃ reagents gives different products. With R  OC₆H₅ and both hydrocarbon and fluorocarbon 1 , only X=P(OC₆H₅)₃ (X = S, O) were identified in the complex reaction mixtures by ¹³С and ³¹Р NMR and GC‐MS. With R = C₆F₅, no interaction with the archetypal 1 was observed but catalytic addition of atmospheric water to the heterocycle afforded 2‐amino‐N‐sulfinylbenzenesulfenamide ( 4 ). With electrophilic B(C₆F₅)₃ instead of nucleophilic P(C₆F₅)₃, only adduct H₃N→B(C₆F₅)₃ and a new polymorph of C₆F₅B(OH)₂ were isolated and identified by X‐ray diffraction (XRD). A molecular structure of 2a was confirmed by XRD, and the π‐stacked orientation of one of phenyl groups and heterocyclic moiety was observed. This structure is in general agreement with that calculated at the RI‐MP2 level of theory, as well as at three different levels of DFT theory with the PBE and B3LYP functionals. Mild thermolysis of 2a in a dilute decane solution gave persistent 5,7‐difluoro‐1,2,3‐benzodithiazolyl ( 3a ) identified by EPR in combination with DFT calculations.     

Self-organization of polyaniline during oxidative polymerization: formation of granular structure

The paper is focused on oxidative polymerization of aniline proceeding in an acid medium with a strong oxidant; formation of polyaniline (PANI) granular structures in different steps of the synthesis was studied. The relationship between the processes of self-organization of the growing polymer into supramolecular structures and the steps of molecular synthesis has been revealed. It was shown that during the induction period (the initial synthesis step), insoluble non-conducting products are formed. They are characterized by the absorption band at 430 nm corresponding to the wavelength of the phenazinium cation radical peak. In the second step, the polymer chain growth, conducting PANI granules with the diameter of 50 nm were obtained. These granules consist of spherical particles with the diameter as small as several nanometers. Then, the granule dimensions increased to 200 nm due to the growth of the spheres; the sphere diameter reached 20 nm. The number of spheres in a granule remained constant. Both precipitate and PANI film consist of common structural elements, polymer spheres, organized into granules and larger structures. Suppression of the polymer chain growth leads to the formation of non-conducting aniline oligomers which are self-organized into large particles with fractal structure. To describe the self-organization processes of a growing polymer chain, the diffusion-limited aggregation mechanism was used.     

Anodic‐Stripping Voltammetric Immunoassay for Ultrasensitive Detection of Low‐Abundance Proteins Using Quantum Dot Aggregated Hollow Microspheres

A new anodic‐stripping voltammetric immunoassay protocol for detection of IgG1, as a model protein, was designed by using CdS quantum dot (QD) layer‐by‐layer assembled hollow microspheres (QDHMS) as molecular tags. Initially, monoclonal anti‐human IgG1 specific antibodies were anchored on amorphous magnetic beads preferably selective to capture F_ab of IgG1 analyte from the sample. For detection, monoclonal anti‐human IgG1 (F_c‐specific) antibodies were covalently coupled to the synthesized QDHMS. In a sandwich‐type immunoassay format, subsequent anodic‐stripping voltammetric detection of cadmium released under acidic conditions from the coupled QDs was conducted at an in situ prepared mercury film electrode. The immunoassay combines highly efficient magnetic separation with signal amplification by the multilayered QD labels. The dynamic concentration range spanned from 1.0 fg mL^?1 to 1.0 μg mL^?1 of IgG1 with a detection limit of 0.1 fg mL^?1. The electrochemical immunoassay showed good reproducibility, selectivity, and stability. The analysis of clinical serum specimens revealed good accordance with the results obtained by an enzyme‐linked immunosorbent assay method. The new immunoassay is promising for enzyme‐free, and cost‐effective analysis of low‐abundance biomarkers.     

A practical and efficient green synthesis of β-aminophosphoryl compounds via the aza-Michael reaction in water

Biphasic systems room temperature imidazolium ionic liquid (RTIL)/water or water as a solvent significantly accelerate the addition of amines to vinylphosphoryl compounds hence opening green and effective synthesis of β-aminophosphoryl compounds in excellent yields over short reaction times. The application of water, being the cheapest and most non-toxic solvent, without any catalyst or co-solvent, is more advantageous as it provides a simple isolation procedure for products having high purity (> 95% according to the NMR data) via simple freeze-drying and does not require extraction with organic solvents. The solubility of the starting phosphorus substrate in water does not play crucial role in the reaction as it was demonstrated using water insoluble diphenylvinylphosphine oxide. In contrast to typical procedures, using a reactant ratio (vinylphosphoryl compound: amine) of 2:1 readily resulted in double phosphorylation of primary amines, including polyamines, in water.     

Polymorphism of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐ and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐ones

This study of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐2H‐chromen‐2‐one, C₁₇H₁₀N₂O₃, 1 , and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐one, C₁₆H₉N₃O₃, 2 , was performed on the assumption of the potential anticancer activity of the compounds. Three polymorphic structures for 1 and two polymorphic structures for 2 have been studied thoroughly. The strongest intermolecular interaction is stacking of the `head‐to‐head' type in all the studied crystals. The polymorphic structures of 1 differ with respect to the intermolecular interactions between stacked columns. Two of the polymorphs have a columnar or double columnar type of crystal organization, while the third polymorphic structure can be classified as columnar‐layered. The difference between the two structures of 2 is less pronounced. Both crystals can be considered as having very similar arrangements of neighbouring columns. The formation of polymorphic modifications is caused by a subtle balance of very weak intermolecular interactions and packing differences can be identified only using an analysis based on a study of the pairwise interaction energies.     

LC/MS and LC/MS/MS based protocol for identification of dyes in historic textiles

Identification of dyes in historic textiles was until recently only based on reversed phase liquid chromatography and diode-array detection (RPLC–DAD). Although in the last years mass spectrometry (MS) is increasingly used as a detection system for liquid chromatography, most applications in the field are directed to identification of the molecular ions or in studies dedicated to degradation products which may be used as markers in RPLC–DAD. In the present work, an analytical protocol for the identification of dyes using RPLC/ESI/MS is presented. Atmospheric pressure electrospray ionization (ESI) was applied, in the negative ion monitoring mode. Both single stage and tandem MS (MS/MS) approaches were considered. An ion trap was used as mass analyzer. Experiments are based on the characterization of standards (natural dyes and/or dyed fibers) with the mass spectrometer sequentially working in the following modes: single MS/full scan, followed by plotting chromatograms through ion extraction (IEC) according to mass/charge ratios corresponding to molecular ions; single MS/selected ion monitoring (SIM) mode; tandem MS/single reaction monitoring (SRM) mode; tandem MS/multiple reactions monitoring (MRM) or product ion scanning modes. A faster chromatographic separation could be applied as MS detection readily balanced the selectivity of the analytical process. In a case study, 11 dyes from 3 biological sources were detected in a 0.5 mg historic sample.     

Synthetic modifications of carboline alkaloid harmine: synthesis of 8-substituted derivatives

Chemistry of Heterocyclic Compounds - Hybrid molecules containing β-carboline and 1-acetylpyrazoline moieties were obtained on the basis of the alkaloid harmine. The synthetic procedure...