Characterization of carboxylic acids in atmospheric aerosols using hydrophilic interaction liquid chromatography tandem mass spectrometry

A sensitive hydrophilic interaction liquid chromatography/electrospray ionization mass spectrometry (HILIC/ESI-MS/MS) method was developed for determination of selected aliphatic (i.e. malonic, succinic, glutaric, adipic, pimelic, suberic, azelaic, maleic, fumaric, glycolic and pyruvic acid), alicyclic (i.e. cis-pinonic and pinic acid) and aromatic (i.e. trimesic, phthalic acid and its isomers) carboxylic acids. Analytes were separated on an amide column using a gradient elution with a 10mM constant ionic strength mobile phase containing acetonitrile and aqueous ammonium acetate buffer (pH 5.0). The influence of the buffer type, pH, polar modifier and temperature on analyte retention under HILIC was studied. Static sonication-assisted solvent extraction was optimized for sample preparation prior to analysis. The recoveries obtained were higher than 90% for most analytes. The method was proven to be sensitive with limits of detection ranged from 0.03 to 16.0 μg/L in selected reaction monitoring mode (SRM). The repeatability and intermediate precision of the method, expressed as RSD (%) of the peak area ratio between analytes and their internal standards were generally lower than 5%. The method was successfully applied for determination of the studied acids in samples of ambient aerosol particles. A big advantage of the new method is also its ability to detect and separate the isobaric compounds of the selected carboxylic acids. Our results demonstrate that the method is specific and sensitive for the determination of a wider range of polar carboxylic acids at low concentrations in complex samples of aerosol particles.     

Ultra-thin-layer chromatography mass spectrometry and thin-layer chromatography mass spectrometry of single peptides of angiotensin-converting enzyme inhibitors

The separation of structurally related angiotensin-converting enzyme (ACE) inhibitors lisinopril, cilazapril, ramipril and quinapril and their corresponding active diacid forms (prilates) by conventional TLC silica gel 60 plates was contrasted with that afforded by monolithic ultra-thin-layer chromatographic (UTLC) plates. For the use of UTLC plates technical modifications of the commercially available equipments for the sample application, development and detection were made. Plates were developed in modified horizontal developing chamber using ethyl acetate-acetone-acetic acid-water (4:1:0.25:0.5, v/v). Detection of the separated compounds was performed densitometrically in absorption/reflectance mode at 220 nm and after exposure to iodine also by image analysis. The obtained results showed that monolithic layer is more efficient for the separation of structurally similar polar compounds, such as prilates than conventional silica layers. Identification of the compounds was confirmed by ESI-MS after their on-line extraction from the UTLC and TLC plates by means of Camag TLC-MS interface.     

Mechanical and anti‐stabbing properties of modified thermoplastic polymers impregnated multiaxial p‐aramid fabrics

New forms of hybrid multiaxial nanocomposites with enhanced mechanical and stab resisting properties are presented. This study is motivated by the lack of knowledge in the study of the multiaxial fabric nanocomposites with two modified thermoplastic matrices for antiballistic protection. Introduction of 5 wt.% silica nanoparticles in the composite of polyurethane/p‐aramid/poly (vinyl butyral) leads to significant improvement in mechanical properties, and the addition of silane as a coupling agents and glutaraldehyde as a crosslinking agents yielded maximal values of storage modulus, tensile modulus and anti‐stabbing properties for hybrid nanocomposites. Ballistic resistance testing and penetration depth of the hybrid nanocomposites were visualized using image analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of boron in boron-alloyed steels by inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometry (ICP-AES) procedure has been developed and examined for the determination of boron content (0.01 up to about 2% B) in boron-alloyed steels such as POLDI ATA BOR (65% Fe, 19%Cr, 12% Ni, 1.5% Mn, 1% B), POLDI ATA BOR EXTRA (62% Fe, 18% Cr, 13% Ni, 2.5% Mo, 1.5% Mn, 1% B) and POLDI ATA BOR-R (75% Fe, 18% Cr, 3.5% Ti, 1.8% B). The steel sample is dissolved with a mixture of hydrochloric, nitric, sulfuric and phosphoric acids in a quartz vessel. Borides of alloyed metals, especially of iron and chromium, are quantitatively decomposed. The presence of phosphoric acid in a sample solution reduces the volatility of boric acid with water vapour.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

The influence of temperature on photodynamic cell killing in vitro with 5-aminolevulinic acid

Cell survival was investigated after exposing cells in vitro to different temperatures before or after photodynamic therapy with 5-aminolevulinic acid. The photodynamic process was found to be temperature dependent. Cells exposed for 1h to 41 degrees C before light exposure or to 7 degrees C after light exposure showed decreased survival. Furthermore, the photobleaching rate of protoporphyrin IX in the cells was found to increase with increasing temperature during the light exposure. Thus, the photodynamic effect with 5-aminolevulinic acid may be enhanced by heating the tumour area before, and by cooling it immediately after the treatment.     

Synthesis and photochemistry of beta,beta'-di(2-furyl)-substituted o-divinylbenzenes: intra- and/or intermolecular cycloaddition as an effect of annelation

New heteroaryl-substituted o-divinylbenzenes, 2,2'-(1,2-phenylenedivinylene)difuran (9), 2,2'-(1,2-phenylenedivinylene)bisbenzo[b]furan (10), and 2,2'-(1,2-phenylenedivinylene)bisnaphtho[2,1-b]furan (11), were prepared and irradiated at various concentrations; intramolecular photocycloaddition and intermolecular [2+2] twofold photoaddition reactions took place to give bicyclo[3.2.1]octadiene derivatives 12-14 and cyclophane derivatives 15-17, respectively. Compound 11 was the most selective of these o-divinylbenzenes, which, owing to pi-pi intra- or intermolecular complexation, gave only the exo-bicyclo[3.2.1]octadiene derivative 14 at low concentrations, and only the cyclophane derivative 17 at high concentrations.     

Solution behavior of a surfactant aldehyde–the oxidation product of an alcohol ethoxylate

It has previously been shown that alcohol ethoxylates readily undergo autoxidation and that one of the major oxidation products is the surfactant aldehyde, i.e. an ethoxylate carrying a –CH₂CHO group at the terminal end of the polyoxyethylene chain. In this work the cloud point, phase behavior and aggregation characteristics of the surfactant aldehyde produced by oxidation of C₁₂H₂₅(OCH₂CH₂)₅OH (C₁₂E₅) are determined and compared with the values obtained with the parent surfactant. It was found that the physico–chemical behavior of the two species was very similar, which indicates that a considerable portion of the aldehyde group is in hydrated state, i.e. the surfactant aldehyde consists of a mixture of aldehyde in carbonyl form and the corresponding geminal diol. The cloud point of the surfactant aldehyde decreased rapidly with time, even when it was stored at low temperature. Also the parent surfactant and its homologue C₁₂E₆ exhibited a decrease in cloud point during storage. For instance, a 1% aqueous solution of C₁₂E₆ showed a cloud point decrease from 62 to 32°C after 4 months storage at 40°C. Such a change in solution behavior can have important practical implications.     

Modification of polysulfone membranes 5. Effect of n-butylamine and allylamine plasma

This paper describes some properties of microwave plasma polymers of n-butylamine and allylamine deposited on the surface of polysulfone substrate. Contact angle evaluation, ATR-FTIR spectroscopy, X-ray photoelectron spectroscopy analysis and estimation of pore size distribution of ultrafiltration polysulfone membranes were used. It was found that addition of Ar to the amine vapor significantly stabilized the plasma and converted it to the ablation mode. The surface became more hydrophilic and the surface groups were enriched in oxygen. Both amines gave deposits of various compositions: the n-butylamine polymer was not as enriched in amines as the polymer formed from allylamine. However, the amounts of nitrogen in both deposits indicated allylamine to be the precursor for the preparation of membranes with weakly basic functionalities. When porous membranes are modified, the ultrafilters obtained may be named `fouling protected' as they do not foul so intensively with proteins as their unmodified analogues. To a lesser extent, similar behavior was shown by membranes modified by deposition of plasma-polymerized n-butylamine.