A study of the friedel-crafts acylation of 1-benzenesulfonyl-1H-pyrrole in the preparation of 3-aroylpyrroles

In this work, we studied the aluminum chloride catalyzed reaction of 1-benzenesulfonyl-1H-pyrrole with a series of eleven aroyl chlorides. The products formed were not isolated, but hydrolyzed to the target 3-aroylpyrroles in overall yields, usually, higher than 50%. However, in the cases with the π electron rich 1-phenyl-1H-pyrrole-3-carbonyl chloride and 1-methyl-1H-indole-3-carbonyl chloride significant C-2 substitution occured, resulting in the isolation of the corresponding 1-benzenesulfonyl-2-aroylpyrroles as the predominant or the sole products. The desired C-3 isomers were synthesized starting with 1-triisopropylsilanyl-1H-pyrrole.     

Molecular simulation of the hydration Gibbs energy of barbiturates

In the present work, molecular dynamics calculations of the Gibbs energy of hydration of 10 different substituted barbiturates in SPC/E water were performed using thermodynamic integration. Given that experimental determination of the Gibbs hydration energy for this class of compounds is currently unfeasible, computer simulations appear as the only alternative for the estimation of this important quantity. Several simulation parameters are discussed and optimized based on calculations for barbituric acid. It is concluded that accounting for electrostatic interactions with the Reaction-Field method can be up to two times faster than with Particle-Mesh-Ewald method, without loss of accuracy. Different number of solvent molecules and simulation lengths were also tested. Lennard-Jones and electrostatic contributions were scaled down to zero in an independent way. It is shown that the electrostatic contribution is dominant (representing approximately 90% of the total Gibbs energy of hydration) and that barbiturate intra-molecular interactions cannot be neglected. The importance of the electrostatic contribution is attributed to the formation of hydrogen bonds between the barbiturates and water, which play an important role in the solvation process. The influence of the different substituents and their contribution to the Gibbs energy of hydration was assessed. Finally, the Lennard-Jones contributions and the total hydration Gibbs energy can both be correlated against molecular weight or partition coefficient data for mono- and di-substituted barbiturates.     

Determination of Trace Tl(I) by Anodic Stripping Voltammetry on Novel Disposable Microfabricated Bismuth‐Film Sensors

This work reports the trace determination of Tl(I) by square‐wave anodic stripping voltammetry (SWASV) on novel microsensors equipped with a bismuth‐film electrode (BiFE). The sensors were fabricated by a multistep microfabrication approach combining sputtering (to deposit the electrode materialm, bismuth‐ and the insulator SiO₂, on the surface of a silicon wafer) and photolithography (to define the geometry of the sensor). The effect of the preconcentration time, the preconcentration potential and the SW stripping parameters were investigated. Using the selected conditions, the 3σ limit of detection was 0.6 µg L^?1 of Tl(I) at a preconcentration time of 240 s and the percent relative standard deviation was 4.3 % at the 10 µg L^?1 level (n=8). In order to eliminate the interference caused by Pb(II) and Cd(II), EDTA was added in the sample solution The method was successfully applied to the determination of Tl(I) in a certified lake water sample. These new sensors exhibit excellent mechanical stability and offer wide scope as mercury‐free disposable sensors for trace metal analysis.     

Use of low-and high-energy collision-induced dissociation tandem mass spectrometry in the identification of an unusual amino acid in a semisynthetic polypeptide

During production of the semisynthetic eicosapeptide Phe-Pro-Arg-Pro-Gly-Gly-Gly-Gly-Asn-Gly-Asp-Phe-Glu-Glu-Ile-Pro-Glu-Glu-Tyr-Leu, two minor impurities were isolated in which Ile-15 had been replaced by other amino acids. The molecular weights of the two peptide minor products were 14 u lower and 14 u higher, respectively, than the major product with the foregoing amino acid sequence. It was determined that the first, lower molecular weight, impurity contained Val instead of Ile at position 15 of the sequence, whereas the second, higher molecular weight, impurity contained an unusual amino acid at the same position. This amino acid, which was characterized from the low-and high-energy collision-induced dissociation product ion tandem mass spectra of the second peptide impurity, is an α-amino acid with an asymmetric side chain branched at the β-carbon.     

Silver Nanoparticles Using Eucalyptus or Willow Extracts (AgNPs) as Contact Lens Hydrogel Components to Reduce the Risk of Microbial Infection

Eucalyptus leaves (ELE) and willow bark (WBE) extracts were utilized towards the formation of silver nanoparticles (AgNPs(ELE), AgNPs(WBE)). AgNPs(ELE) and AgNPs(WBE) were dispersed in polymer hydrogels to create pHEMA@AgNPs(ELE)_2 and pHEMA@AgNPs(WBE)_2 using hydroxyethyl-methacrylate (HEMA). The materials were characterized in a solid state by X-ray fluorescence (XRF) spectroscopy, X-ray powder diffraction analysis (XRPD), thermogravimetric differential thermal analysis (TG-DTA), differential scanning calorimetry (DTG/DSC) and attenuated total reflection spectroscopy (ATR-FTIR) and ultraviolet visible (UV-vis) spectroscopy in solution. The antimicrobial potential of the materials was investigated against the Gram-negative bacterial strain Pseudomonas aeruginosa (P. aeruginosa) and the Gram-positive bacterial strain of the genus Staphylococcus epidermidis (S. epidermidis) and Staphylococcus aureus (S. aureus), which are involved in microbial keratitis. The percentage of bacterial viability of P. aeruginosa and S. epidermidis upon their incubation over the pHEMA@AgNPs(ELE)_2 discs is interestingly low (28.3 and 6.8% respectively), while the inhibition zones (IZ) formed are 12.3 ± 1.7 and 13.2 ± 1.2 mm, respectively. No in vitro toxicity of this material towards human corneal epithelial cells (HCEC) was detected. Despite its low performance against S. aureus, pHEMA@AgNPs(ELE)_2 could be an efficient candidate towards the development of contact lenses that reduces microbial infection risk.     

Lithological and seasonal variations in radon concentrations in Cypriot groundwaters

The paper presents and discusses radon activity concentrations in Cypriot groundwater systems as a function of the background lithology and seasonal/meteorological conditions using an airborne radon monitoring system (ARM) after separation of radon by out-gassing. Radiometric analysis of groundwater samples obtained from non-contaminated systems showed that radon concentration in groundwaters varies strongly (0.1–10 Bq L⁻¹) depending mainly on the hosting geological matrix but also to lesser degree on atmospheric/meteorological conditions. The associated excess annual dose has been estimated to range between 10⁻⁶ and 10⁻⁴ mSv y⁻¹, which is an insignificant contribution to the radiation exposure of the Cypriot population caused by airborne radon (0.5 ± 0.4 mSv y⁻¹).     

Monte Carlo studies of tethered chains

Monte Carlo computer simulations of end-tethered chains grafted onto a hard wall have been performed. The chains were modeled as self-avoiding chains on a cubic lattice at athermal solvent conditions. The simulations spanned a wide range of chain lengths, N (100–1000, i.e., up to molecular weights of a few hundred thousands), and anchoring densities, σ (2 × 10⁻⁴ to 0.4), to properly chart the relevant parameter space. It is shown that the reduced surface coverage σ* = σπR is the most appropriate variable that quantitatively determines the mushroom, overlapping mushroom and brush regimes, where R_g is the radius of gyration of a free chain in solution. The simulation data are analyzed to determine the conformational characteristics and shape of the anchored chains and to compare them with the predictions of the analytical self consistent field theory. The strong stretching limit of the theoretical predictions is obtained only for σ* > 8. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47:2449–2461, 2009     

Investigation of the colourants used in icons of the Cretan School of iconography

The red shades of 13 icons (15th-17th century) of the Cretan School of iconography are investigated in detail to identify the inorganic and organic colouring materials comprising the paint layers. Examination of sample cross-sections is performed with optical microscopy. Micro-Raman spectroscopy and high performance liquid chromatography (HPLC) coupled to a photodiode array detector are employed for the identification of the inorganic and organic colouring materials, respectively. The results reveal the extensive use of coccid dyes by the Cretan painters: kermes (Kermes vermilio Planchon) is found in icons dated before the middle 16th century and cochineal in icons created several decades after the discovery of the New World. Other dyestuffs detected in the historical samples are madder (possibly Rubia tinctorum L., according to HPLC profiles), soluble redwood and indigoid dyes. Organic dyes were used by the painters as exclusive colouring matters (or glazes) or in mixtures with inorganic pigments, such as red ochre, cinnabar, minium, azurite lead white and carbon black.Liquid chromatography with mass spectrometry (LC-MS) coupled to a negative electrospray ionization mode is employed to provide information on the identity of some unknown colouring components, of the aforementioned dyes, detected in the historical samples. The results suggest that (i) the type B compound (also known as Bra′) is a dehydro-brazilein product and (ii) the deprotonated molecular ion of the type C compound corresponds to m/z = 243. Both compounds are commonly used as markers for the identification of soluble redwood in historical samples. LC-MS analysis of cochineal shows that the dcIV and dcVII components are isomeric with carminic acid, as it has been recently suggested. Finally, LC-MS is employed to identify and record kermesic and flavokermesic acid in kermes and rubiadin in wild madder.