Synthesis and characterization of PAni–SiO2 and PTh–SiO2 nanocomposites' thin films by plasma polymerization

In the present work, we explore the possibility to deposit polyaniline–silicon dioxide (PAni–SiO₂) and polythiophene–silicon dioxide (PTh–SiO₂) nanocomposites through a plasma polymerization route. The films were generated by spraying of mixtures of nano-sized silica particles dispersed in the liquid monomer into a plasma stream of the DC-plasma discharge reactor. The silica in the resulted polymer matrix changes the conduction mechanisms varying from ohmic to ballistic and traps inducing the space charged limited currents (SCLC). The silica modifies the morphology and composition of the deposited films.     

Formation of Iron Macro-Spheres in Plasma

In this paper the formation mechanism of iron macro-spheres in a plasma medium is dealt with, including the conditions under which such spheres are formed. The geometry of the spheres referred to above depends on the main technological parameters involved in the production of pores. Conditions under which pores occur within macro-spheres are also established. The radii of these pores are sensitive to the velocity distribution within the plasma jet section     

Synthesis and characterization of comb-like polyphenylenes via Suzuki coupling of polystyrene macromonomers prepared by atom transfer radical polymerization

1,4-Dibromo-2,5-bis(bromomethyl)benzene was used as initiator in atom transfer radical polymerization of styrene in conjunction with CuBr/2,2^′-bipyridine as catalyst. The resulting macromonomer, with a central 2,5 dibromobenzene ring and the degree of polymerization of 16 at each side, was used in combination with 2,5-dihexylbenzene-1,4-diboronic acid, for a Suzuki coupling in the presence of Pd(PPh₃)₄ as catalyst. The obtained polyphenylene, with alternating polystyrene and hexyl side chains, has high solubility in common organic solvents at room temperature. The new polymer was characterized by GPC, 1H-NMR, 13C-NMR, IR and UV analysis. Thermal behavior of the precursor polystyrene macromonomer and the final polyphenylene was investigated by thermogravimetric analysis and differential scanning calorimeter/calorimetry analyses and compared.     

Influences of changes in multitopic tris(pyrazolyl)methane ligand topology on silver(I) supramolecular structures

The reactions between silver tetrafluoroborate and the ligands 1,2,4,5-C(6)H(2)[CH(2)OCH(2)C(pz)(3)](4) (L1, pz = pyrazolyl ring), o-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2) (L2), and m-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2) (L3) yield coordination polymers of the formula (C(6)H(6)(-)(n)[CH(2)OCH(2)C(pz)(3)](n)(AgBF4)(m))( infinity ) (n = 4, m = 2, 1; n = 2, ortho substitution, m = 1, 2; meta substitution, m = 2, 3). In the solid state, L2 molecules dimerize by a pair of C-H.pi interactions, forming an arrangement that resembles the tetratopic ligand L1. In the solid-state structure of 1, each silver atom is kappa(2)-bonded to two tris(pyrazolyl)methane units from different ligands with the overall structure a polymer made up from 32-atom macrocyclic rings formed by bonding tris(pyrazolyl)methane groups from nonadjacent positions on the central arene rings to the same two silver atoms. In 2, each silver is bonded to two tris(pyrazolyl)methane units in the same kappa(2)-kappa(2) fashion as with 1, forming a polymer chain. The chains are organized into dimeric units by strong face-to-face pi-pi stacking between the central arene rings making bitopic L2 act as half of tetratopic L1. The chains in both structures are organized by weak C-H.F hydrogen bonds and pi-pi stacking interactions into very similar 3D supramolecular architectures. The structure of 3 contains three types of silvers with the overall 3D supramolecular sinusoidal structure comprised of 32-atom macrocycles. Infrared studies confirm the importance of the noncovalent interactions. Calculations at the DFT (B3LYP/6-31G) level of theory have been carried out on L2 and also support C-H.pi interactions. Electrospray mass spectral data collected from acetone or acetonitrile show the presence of aggregated species such as [(L)Ag(2)(BF(4))](+) and [(L)Ag(2)](2+), despite the fact that (1)H NMR spectra of all compounds show that acetonitrile completely displaces the ligand whereas acetone does not.     

A Comment on Change of Nusselt Number Sign in a Channel Flow Filled by a Fluid-Saturated Porous Medium with Constant Heat Flux Boundary Conditions

The aim of this Letter is to show that, the Nusselt number sign might be changed without changing of heat transfer direction at the wall of channels, even for flows without viscous dissipation.     

Asymmetry in liquid crystalline hexaalkoxytriphenylene discotics

The synthesis and phase behaviour of a new series of unsymmetrically substituted hexaalkoxytriphenylene‐based liquid crystals are reported. One of the hexyloxy chains in hexahexyloxytriphenylene (HAT6) is replaced by either a shorter or a longer chain, HAT‐(OC₆H₁₃)₅(OC _n H_2n+1). Compounds with chain lengths n of 2–14, 16 and 18 were prepared and investigated. Compounds with n?13 were not liquid crystalline. For all compounds with n?12 Col_h textures were observed by polarizing microscopy. X‐ray investigations showed that the intercolumnar distance gradually increased with n from n = 2 to n = 12, while the interdisk distance (3.6 Å) remained constant. A small odd–even effect on the increase of the intercolumn distance with n was observed. This effect was also found in the change of ΔH of isotropization with n.     

Surface influence on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel

Low-field nuclear magnetic resonance techniques are employed to extract information about the effects introduced by the interaction with the surface on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel. The molecules under study were water, cyclohexane, and hexane. They were chosen due to their different interaction strength with the carbonaceous matrix. Frequency dependent longitudinal relaxation measurements, using the fast field cycling technique, allowed extraction of the fractal dimension of the carbon xerogel surface. It was observed that the measured value is influenced by the molecule affinity to the surface. Diffusion measurements, using the pulse field gradient technique, have revealed that the stronger interaction with the surface of cyclohexane and hexane molecules leads to an increased diffusive tortuosity, as compared with water.     

Thermostable Trioxane-Dioxolane Copolymers Obtained with Boron Trifluoride: Acrylonitrile Complex as Initiator

Trioxane was copolymerized with small amounts of dioxolane in benzene in the presence of a boron trifluoride:a crylonitrile complex as initiator. The kinetics of reactions was expressed in terms of topoenergetic principles. The copolymerizations had no induction periods and the maximum reaction rate was found proportional to the square of both the initiator and monomers concentrations. A zwitterionic mechanism is suggested for initiation. The activation energy for the system with 5% dioxolane was determined as 18.3 kcal/mol. The melting behavior of the copolymers is briefly discussed as a function of the dioxolane initial content, and is indicative of the amorphous-crystalline coupling phenomenon. The copolymers with ～ 5% dioxolane are thermostable in air up to 250%deg; and are recommended for practical purposes.     

NMR Characterization of Substituted Aromatic Poly (Ether Sulofone)s

Abstract

The synthesis of a variety of substituted bisphenol A polysulfones, including nitro, amino, aminomethyl, ethyl, and methyl derivatives, is described. Nuclear magnetic resonance (NMR) (both proton and carbon, and several 2-D experiments) data confirm conclusions on the substitution site based on arguments on inductive effects in the phenyl rings. The proton ortho to the oxygen in the bisphenol A (BPA) residue is replaced in electrophilic substitution reactions. The degree of substitution was also calculated from the NMR results. The ethyl and methyl derivatives were expected, from the starting reactants, to each have a BPA ring substituted. The NMR data showed that, on the average, this is true. The nitro derivative also has substitution in every BPA ring, while the amino and aminomethyl derivatives have only intermittent BPA rings substituted. Measured degrees of substitution (DS) varied from 0.11 to 2.25.     

Coordination Polymers. 9. Chelate Polymers Derived from Bisphenolic Complexes and Propylenediamine

Chelate polymers derived from bis(2,4-dihydroxybenzaldehyde)propyl-enediimine M and bis(2,4-dihydroxyacetophenone)propylenediimine M (M = Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺) with aromatic acid chlorides were prepared by interfacial polycondensation. Also, chelate polysiloxanes were obtained from the same monomers and α,ω-dichloropolydimethyl-siloxane. The spectral, thermal, magnetic, and electrical properties of the polychelates were studied.