Surface-enhanced Raman scattering effect of gold nanoparticle arrays: The influence of annealing temperature,excitation power and array thickness

Gold nanoparticle arrays are fabricated for surface-enhanced Raman scattering (SERS) and the effect of the annealing temperature, the thickness of nanoparticle array and the exciting power on the SERS signals are investigated. The particle distribution and particle size are dense and uniform on the glass substrate when the 10 nm gold film was annealed at 250 °C and strong SERS signals for Rhodamine 6G were achieved via a 532 nm excitation with a 10 mW power. The SERS signal at 1650 cm⁻¹ is enhanced more than 10 times as compared to that of the gold film without annealing. The strong SERS behavior of gold nanoparticle arrays may broaden the SERS applications in biomedical and analytical chemistry.     

In situ study of self-ion irradiation damage in W and W–5Re at 500 °C

In situ self-ion irradiations (150?keV?W⁺) have been carried out on W and W–5Re at 500?°C, with doses ranging from 10¹⁶ to 10¹⁸ W⁺m^?2 (～1.0?dpa). Early damage formation (10¹⁶W⁺m^?2) was observed in both materials. Black–white contrast experiments and image simulations using the TEMACI software suggested that vacancy loops were formed within individual cascades, and thus, the loop nucleation mechanism is likely to be ‘cascade collapse’. Dynamic observations showed the nucleation and growth of interstitial loops at higher doses, and that elastic loop interactions may involve changes in loop Burgers vector. Elastic interactions may also promote loop reactions such as absorption or coalescence or loop string formation. Loops in both W and W–5Re remained stable after annealing at 500?°C. One-dimensional hopping of loops (b?=?1/2 ?111>) was only seen in W. At the final dose (10¹⁸W⁺m^?2), a slightly denser damage microstructure was seen in W–5Re. Both materials had about 3–4?×?10¹⁵ loops m^?2. Detailed post-irradiation analyses were carried out for loops of size???4?nm. Both b?=?1/2 ?111? (～75%) and b?= ?100> (～25%) loops were present. Inside–outside contrast experiments were performed under safe orientations to determine the nature of loops. The interstitial-to-vacancy loop ratio turned out close to unity for 1/2 ?111? loops in W, and for both 1/2 ?111? and ?100? loops in W–5Re. However, interstitial loops were dominant for ?100? loops in W. Re seemed to restrict loop mobility, leading to a smaller average loop size and a higher number density in the W-Re alloy.     

Transient time in homogeneous nucleation

The problem of the transient time in nucleation is studied. The size-dependent transient time at a constant temperature is defined and the approximate analytical solution is found and compared with the exact numerical solution for the model Li₂O.2 SiO₂ melt. It is shown that the analytical solution for the size-dependent transient time is in agreement with the numerical result.     

Design of optical triangulation devices

This paper presents the derivation of the precise relation between the displacement of a light spot on an object's surface and the displacement of its image on the detector in an optical triangulation device, along with applications of the design of triangulation devices. Based on this relation, improved designs of optical triangulation devices, including devices of adjustable configurations, are proposed and discussed.     

Error estimates for Hermite interpolation on spheres

In this paper, we prove convergence rates for spherical spline Hermite interpolation on the sphere S^d−1 via an error estimate given in a technical report by Luo and Levesley. The functionals in the Hermite interpolation are either point evaluations of pseudodifferential operators or rotational differential operators, the desirable feature of these operators being that they map polynomials to polynomials. Convergence rates for certain derivatives are given in terms of maximum point separation.     

Tuning inventory policy parameters in a small chemical company

A project to improve inventory management in a small UK chemical company is described. A research group comprising university academics and company managers for logistics and information technology examined current practices and analysed a database of historical records of business operations of the company. Based on the analysis, a scheme to categorise stock and set ordering policies to optimise inventory costs was developed. Some comments are made on process issues and the learning that took place.     

CsI(Tl)晶体中反冲Cs和I核Quenching?Factor的测量

许多实验对用CsI(Tl)闪烁晶体作为探测器来寻找和探测暗物质的可行性进行了研究.本工作利用8MeV单能中子轰击CsI(Tl)晶体探测器来研究Cs核和I核的QuenchingFactor.在数据处理中,运用脉冲形状甄别(PSD)方法来分辨反冲核信号和本底信号.实验结果表明,在7keV到132keV的能区中,Quench ingFactor随着反冲核能量的减少而增加.在探测暗物质的实验中,这一性质对于CsI(Tl)晶体探测器获得较低的能量阈值是很有利的.     

Measuring partial fluorescence yield using filtered detectors

Typically, X‐ray absorption near‐edge structure measurements aim to probe the linear attenuation coefficient. These measurements are often carried out using partial fluorescence yield techniques that rely on detectors having photon energy discrimination improving the sensitivity and the signal‐to‐background ratio of the measured spectra. However, measuring the partial fluorescence yield in the soft X‐ray regime with reasonable efficiency requires solid‐state detectors, which have limitations due to the inherent dead‐time while measuring. Alternatively, many of the available detectors that are not energy dispersive do not suffer from photon count rate limitations. A filter placed in front of one of these detectors will make the energy‐dependent efficiency non‐linear, thereby changing the responsivity of the detector. It is shown that using an array of filtered X‐ray detectors is a viable method for measuring soft X‐ray partial fluorescence yield spectra without dead‐time. The feasibility of this technique is further demonstrated using α‐Fe₂O₃ as an example and it is shown that this detector technology could vastly improve the photon collection efficiency at synchrotrons and that these detectors will allow experiments to be completed with a much lower photon flux reducing X‐ray‐induced damage.     

Mechanical and Thermal Properties Enhancement of Poly(Lactic Acid)/Halloysite Nanocomposites by Maleic-Anhydride Functionalized Rubber

Poly(lactic acid) (PLA)/halloysite composites were prepared using melt compounding followed by compression molding. Maleic anhydride grafted styrene-ethylene/butylene-styrene (SEBS-g-MAH) was used to toughen the PLA composites. The mechanical properties of the PLA composites were studied through tensile, flexural, and impact tests. The thermal properties were characterized by using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The fracture surfaces of the composites were assessed by using field emission scanning electron microscopy (FESEM). The impact strength and thermal properties of the PLA/halloysite composites were increased by addition of SEBS-g-MAH.