Large‐scale extrusion processing and characterization of hybrid nylon‐6/SiO2 nanocomposites

Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide‐6 (PA‐6) is achieved using a twin‐screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h^?1 with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA‐6 showed higher amounts of γ‐phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E‐modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E′ and E″) increased and tan δ decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis and characterization of active ester-functionalized polypyrrole-silica nanoparticles: application to the covalent attachment of proteins

Novel ester-functionalized polypyrrole-silica nanocomposite particles were prepared by oxidative copolymerization of pyrrole and N-succinimidyl ester pyrrole (50/50% initial concentrations), using FeCl3 in the presence of ultrafine silica nanoparticles (20 nm diameter). The N-succinimidyl ester pyrrole monomer was prepared in aqueous solution using 1-(2-carboxyethylpyrrole) and N-hydroxysuccinimide in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The resulting nanocomposites (N-succinimidyl ester polypyrrole-silica) are raspberry-shaped agglomerates of silica sol particles "glued" together by the insoluble poly(pyrrole-co-N-succinimidyl pyrrole). The N-succinimidyl ester polypyrrole-silica particles were characterized in terms of their size, density, copolymer content, and polydispersity. Scanning electron microscopy and disk centrifuge sedimentometry confirmed that the nanocomposite particles had narrow size distributions. X-ray photoelectron spectroscopy analysis indicated a silica-rich surface and a high surface concentration of N-succinimidyl ester groups. These nanoparticles exhibited good long-term dispersion stability. The chemical stability of the ester functions in aqueous media after several weeks of storage was monitored by FTIR spectroscopy. The functionalized nanocomposites were tested as bioadsorbents of human serum albumin (HSA). The very high amount of immobilized HSA determined by UV-visible spectroscopy is believed to be due to covalent binding. Incubation of the HSA-grafted nanocomposite with anti-HSA resulted in immediate flocculation, an indication that they are alternative candidates for visual diagnostic assays.     

Ring-opening of unsymmetrical 1,2-dioxines using cobalt(II) salen complexes

The regioselectivity of the metal-catalyzed ring opening of unsymmetrical 1,2-dioxines to cis-gamma-hydroxyenones was investigated using two different Co(II) salen complexes. Regioselectivity was determined by direct examination of the enone ratios and by derivitization with a stabilized phosphorus ylide. The steric influence of the substituents on the 1,2-dioxine was the primary influence on regioselectivity. Temperature played little role; however, solvent and selection of Co(II) complex could be used to mildly influence the outcome of the rearrangement for selected substrates. The origins of the selectivity for the reaction are discussed.     

Structure of microemulsions with gemini surfactant studied by solvatochromic probe and diffusion NMR

The structure of microemulsions prepared by the anionic gemini surfactant didodecyl diphenyl ether disulfonate (C12-DADS) was investigated by a solvatochromic probe and nuclear magnetic resonance (NMR) diffusion measurements. The NMR measurements indicate the presence of bicontinuous and oil-in-water microemulsions depending on microemulsion composition. The absorbance spectra of the solvatochromic probe, Nile red, indicate the solubilization of the probe in different sites, in agreement with the NMR findings. It was also found that the microemulsions were capable of dissolving the hydrophobic probe, Nile red, up to four times better than expected if it were simply dissolved in the toluene phase.     

In search of covalently bound tetra- and penta-oxygen species: a photoelectron spectroscopic and Ab initio investigation of MO4- and MO5- (M = Li,Na, K,Cs)

Although neutral and ionic O4(0/-/+) species have been observed experimentally and considered for energetic materials, O4(2-) and O5(2-) dianions have not yet been explored. O4(2-) is valent isoelectronic to the well-known ClO3- and SO3(2-) anions, and O5(2-) is valent isoelectronic to ClO4- and SO4(2-). All are stable, common anions in solutions and inorganic salts. In this article, we explore the possibility of making covalently bound O4(2-) and O5(2-) species stabilized in the forms of M+O4(2-) and M+O5(2-) (M = Li, Na, K, Cs) in the gas phase. Laser vaporization experiments using M-containing targets and an O2-seeded carrier gas yielded very intense mass peaks corresponding to MO4- and MO5-. To elucidate the structure and bonding of the newly observed MO4- and MO5- species, we measured their photoelectron spectra and then compared them with ab initio calculations and the spectra of ClO3-, Na+SO3(2-), ClO4-, and Na+SO4(2-). Careful analyses of the experimental and ab initio results showed, however, that the observed species are of the forms, O2-M+O2- and O2-M+O3-. The more interesting M+O4(2-) and M+O5(2-) species were found to be higher-energy isomers, but they are true minima on the potential energy surfaces, which suggests that it might be possible to synthesize bulk materials containing covalently bound tetra- and pentatomic oxygen building blocks.     

Flow injection-mini-column technique with ICP-AES detection for the isolation and preconcentration of the fast reactive aluminium fraction in waters

A flow injection mini-column system based on short reaction times with 8-hydroxyquinoline (oxine) with ICP-AES detection is described for the isolation and preconcentration of the “fast reactive” or “toxic” aluminium fraction in water samples. Using a 3 s reaction time with oxine (5 × 10^–4 mol/l) at pH 5.0, the “fast reactive” aluminium fraction is shown not to include the non-toxic AlF²⁺ species at low F^–: Al³⁺ molar ratios (0.3 : 1). The complexed aluminium is isolated in a stable and recoverable form on mini-columns of Amberlite XAD-2 (0.3 cm × 5.0 cm, resin particle size range 0.08 mm–0.16 mm)). The retained aluminium is recovered by “back-flushing” the analytical column with 1 mol/l HCl for final element specific detection by ICP-AES. Detection limits (after preconcentration) of 2 μg/l, a linear range of 0–500 μg/l, and possible preconcentration factors of up to 18 times are demonstrated with the present system. Implications for the possible solution of sample stability problems encountered with labile aluminium species analysis and the development of a “field sampling” technique are discussed, where the desired Al fraction is quantitatively retained in a stable form on mini-columns.     

Experimental Determination of the Isotherm at 15°C of the System Mg2+/Cl?, SO42–H2O

 The diagram of the ternary system Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O was established at 15°C by means of analytical and conductimetric measurements. Three compounds were found in this diagram, which are MgSO₄·6H₂O, MgSO₄·7H₂O, and MgCl₂·6H₂O. The solubility field of MgSO₄·7H₂O is important whereas those of MgSO₄·6H₂O and MgCl₂·6H₂O are small. The compositions (mass-%) of the two invariant points determined by the two methods are: MgSO₄:MgCl₂=2.73:33.80 and MgSO₄: MgCl₂=3.38:28.91. Both the measured and the calculated isotherm at 15°C have been used for modelling of the diagram Mg²⁺/Cl⁻, SO₄ ²⁻–H₂O between 0 and 35°C. The polythermal invariant point was approximately located between 15 and 10°C.     

Structural and process controls of AIEgens for NIR-II theranostics

Aggregation-induced emission (AIE) is a cutting-edge fluorescence technology, giving highly-efficient solid-state photoluminescence. Particularly, AIE luminogens (AIEgens) with emission in the range of second near-infrared window (NIR-II, 1000–1700 nm) have displayed salient advantages for biomedical imaging and therapy. However, the molecular design strategy and underlying mechanism for regulating the balance between fluorescence (radiative pathway) and photothermal effect (non-radiative pathway) in these narrow bandgap materials remain obscure. In this review, we outline the latest achievements in the molecular guidelines and photophysical process control for developing highly efficient NIR-II emitters or photothermal agents with aggregation-induced emission (AIE) attributes. We provide insights to optimize fluorescence efficiency by regulating multi-hierarchical structures from single molecules (flexibilization) to molecular aggregates (rigidification). We also discuss the crucial role of intramolecular motions in molecular aggregates for balancing the functions of fluorescence imaging and photothermal therapy. The superiority of the NIR-II region is demonstrated by fluorescence/photoacoustic imaging of blood vessels and the brain as well as photothermal ablation of the tumor. Finally, a summary of the challenges and perspectives of NIR-II AIEgens for in vivo theranostics is given.

Structural and process controls of NIR-II AIEgens realize manipulating of radiative (R) and nonradiative (NR) decay for precise theranostics.     

Limitations and perspectives in the determination of carbofuran with various liquid chromatography-mass spectrometry interfacing systems

Column liquid chromatography with mass spectrometric detection (LC-MS) has been widely accepted as the preferred technique for the identification and quantification of polar and thermally labile compounds at trace levels. Over the last decade many different types of LC-MS interfacing techniques have been used for the determination of carbamate pesticides and especially for the N-methylcarbamate carbofuran. This article addresses the difficulties encountered with the various types of LC-MS interface and discusses recent alternatives for the determination of carbofuran. With thermospray and particle beam interfaces the quantification of carbofuran is affected by both the ion source pressure and temperature, whereas quantification using the recently developed atmospheric pressure ionization interfaces, atmospheric pressure chemical ionization, electrospray, and ionspray, is less dependent on these parameters.