Photometrische Kationenbestimmung mit Gelatinefolien

Zusammenfassung Eine einfache und schnelle Methode zur photometrischen Kationenbestimmung mittels Gelatinefolien wurde ausgearbeitet. Eine reine Filmfolie als Träger der Farbreaktion wird in die Kationenlösung und danach in die Reagenslösung eingetaucht, wobei sich in der Gelatineschicht ein gefärbter Niederschlag bildet, dessen Farbintensität proportional der Metallkonzentration ist.Die Folie wird photometriert und mittels einer Eichkurve die Metallkonzentration bestimmt. Das Verfahren wurde an Hand der Cu-Bestimmung mit Diäthyldithiocarbamidat erprobt. Die Färbung befolgt in diesem Fall das Beersche Gesetz. Eine Bestimmung erfordert etwa 20 min. Der relative Fehler beträgt ±5 % bei einer Konzentration von 3–30 g Cu²⁺/ml.

---

Photometric determination of cations by means of gelatin filmDetermination of copper with diethyldithiocarbamidate

A simple and rapid method for the photometric determination of cations using a strip of gelatin film has been developed. The strip is immersed in the sample solution and afterwards in a reagent solution. The intensity of a the coloured precipitate formed in the strip is proportional to the metal ion concentration, which is determined photometrically using a calibration curve. The determination of Cu with diethyldithiocarbamidate has been selected for testing the technique. The colour intensity in this case follows Beer's law. The determination can be performed within 20 min. The relative error amounts to ±5 % for a concentration range of 3–30 g of Cu²⁺/ml.

     

The type of group measure space von Neumann algebras

LetG be a countable discrete group acting by measure-preserving automorphisms of a finite measure space (M, ) and let (G,M) be the corresponding group measure space von Neumann algebra, which will be a finite von Neumann algebra. Necessary and sufficient conditions are given for (G,M) to have a non-zero type I part, and the projection on the type I part is explicitly described.This research was supported in part by National Science Foundation Grant MCS 74-19876.     

Unexpected reactivity of PdCl(2) and PtCl(2) complexes of the unsaturated diphosphine o-Me(2)TTF(PPh(2))(2) toward chloride abstraction with thallium triflate

Attempted thallium triflate abstraction of chloride anions from the MCl(2) complexes of the unsaturated chelating diphosphines o-dimethyl-bis(diphenylphosphino)tetrathiafulvalene (P2) (M = Pd, Pt) and cis-1,2-bis(diphenylphosphino)ethylene (dppen) (M = Pd) affords, surprisingly, a Tl(OTf) adduct in the case of (P2)PdCl(2) and (P2)PtCl(2), with no chloride abstraction, and a dicationic bis(palladium) bis(triflate) salt in the case of (cis-dppen)PdCl(2), in which only one Cl anion was removed. The crystal structures of these complexes were determined by X-ray analysis, which established the formulations (P2)MCl(2).Tl(OTf) (M = Pd, Pt) and [(dppen)PdCl](2)(OTf)(2), respectively. These compounds can be seen as possible intermediates in the general chloride abstraction process between (P-P)MCl(2) (M = Pd, Pt) and thallium triflate.     

Preparation of Neutral Ionophores for Alkali and Alkaline Earth Metal Cations and their application in ion selective membrane electrodes

The preparation of a series of non-cyclic, uncharged ligands able to selectively complex alkali and alkaline earth metal cations is described. These molecules are designed to be used as carriers for cations through membranes. Some of the compounds show high Ca²⁺ and Na⁺ selectivity, respectively, in liquid membrane electrodes.     

Characterization of single- and double-stranded DNA on gold surfaces

Single- and double-stranded deoxy ribonucleic acid (DNA) molecules attached to self-assembled monolayers (SAMs) on gold surfaces were characterized by a number of optical and electronic spectroscopic techniques. The DNA-modified gold surfaces were prepared through the self-assembly of 6-mercapto-1-hexanol and 5'-C(6)H(12)SH -modified single-stranded DNA (ssDNA). Upon hybridization of the surface-bound probe ssDNA with its complimentary target, formation of double-stranded DNA (dsDNA) on the gold surface is observed and in a competing process, probe ssDNA is desorbed from the gold surface. The competition between hybridization of ssDNA with its complimentary target and ssDNA probe desorption from the gold surface has been investigated in this paper using X-ray photoelectron spectroscopy, chronocoulometry, fluorescence, and polarization modulation-infrared reflection absorption spectroscopy (PM-IRRAS). The formation of dsDNA on the surface was identified by PM-IRRAS by a dsDNA IR signature at approximately 1678 cm(-)(1) that was confirmed by density functional theory calculations of the nucleotides and the nucleotides' base pairs. The presence of dsDNA through the specific DNA hybridization was additionally confirmed by atomic force microscopy through colloidal gold nanoparticle labeling of the target ssDNA. Using these methods, strand loss was observed even for DNA hybridization performed at 25 degrees C for the DNA monolayers studied here consisting of attachment to the gold surfaces by single Au-S bonds. This finding has significant consequence for the application of SAM technology in the detection of oligonucleotide hybridization on gold surfaces.     

Determination of phenolic compounds in water samples by on-line solid-phase extraction—supercritical-fluid chromatography with diode-array detection

Summary The eleven Environmental Protection Agency (EPA) priority phenolic compounds have been determined by solid-phase extraction (SPE) coupled on-line to supercritical-fluid chromatography (SFC) with diodearray detection. The variables affecting chromatographic separation were optimized and the analytes were separated at 40 °C in two diol columns connected in series; a gradient of methanol, as modifier, and CO₂ was used as mobile phase. Under these conditions, all the compounds studied were separated to baseline in less than 13 min. PLRP-S and LiChrolut EN were tested as sorbents in a 10×3 mm i.d. laboratory-packed precolumn for solid-phase extraction. An ion-pair reagent, tetrabutylammonium bromide (TBA), was used in the extraction process to increase break-through volumes. The performance of the method was checked with tap and river waters and the pre-concentration of 20 mL of sample in a PLRP-S pre-column enabled phenolic compounds to be determined at low μg L⁻¹ levels with limits of detection ranging between 0.4 and 2 μg L⁻¹. The repeatability and reproducibility between days (n=3) for real samples spiked at 10 μg L⁻¹ were lower than 10%.     

Electronic Structure of Rh(2)(&mgr;-CO)(CO)(2)(H(2)PCH(2)PH(2))(2). An Example of a Non-A-Frame Structure

Calculations based on density functional theory (DFT) and Hartree-Fock configuration interaction (HF-CI) methodology have been carried out to investigate the rhodium-rhodium coupling in Rh(2)(CO)(2)(dppm)(2), 1 (dppm = Ph(2)PCH(2)PPh(2)) and in Rh(2)(&mgr;-CO)(CO)(2)(dppm)(2), 2. DFT geometries, obtained with the Dgauss program, are in good agreement with those determined from X-ray, but HF geometries, calculated using the same basis sets, yield bond distances systematically too long. Calculations indicate that the rhodium atoms in 1 are linked by a single bond. The insertion of a semibridging carbonyl between the two metal atoms leads to a shortening of the rhodium-rhodium distance and also to a noticeable weakening of the metal-metal interaction. Both effects, and also the stabilization of the HOMO of 2, are related to an observed change from square planar to tetrahedral of the ligand environment of the Rh atom proximal to the inserted CO. Both MO analysis and bond characterization from the topology of the charge density confirm the existence of a bonding interaction between the semibridging carbonyl and the distal rhodium atom. The electronic structures of the dicationic complex [Rh(2)(CO)(3)(dppm)(2)](2+) and of the A-frame-like, isoelectronic system Rh(2)Br(2)(&mgr;-CO) (dppm)(2) are also discussed. The electron deformation density is derived from 2 by means of several methodological approaches, namely, HF, HF-CI, DFT, and DFT + gradient corrections. The HF deformation density obtained in the plane containing the metals and the three CO ligands is discussed, as well as the "correlation density" obtained from the difference maps DFT - HF and CI - HF.     

An optimized direct method for the determination of carboxylic acids in beverages by HPLC

Summary A direct method for the simultaneous determination of tartaric, malic, lactic, acetic, citric, shikimic, fumaric and succinic acids in fruit juices and wines by isocratic reversed phase HPLC is reported.The variables (pH, ionic strength, flow and temperature) have been optimized by a modification of the original simplex method. The separation factor (s) and calibrated resolution product (r^*) have been used as criteria for selectivity optimization. After validation, the method has been applied to the determination of carboxylic acids in apple, orange and lemon juices, white and red wines and musts during the fermenation process.     

Assessment of supporting electrolyte contributions in electrochemically modulated liquid chromatography

This paper reports the results of an investigation on the role of the supporting electrolyte in separations using electrochemically modulated liquid chromatography (EMLC) with a porous graphitic carbon stationary phase. With respect to the identity of the supporting electrolyte, the elution strength of the electrolyte anion increased as F- < OH- < BF4- < ClO4- < PF6- for injections of negatively charged aromatic molecules, whereas a 10-fold increase in electrolyte concentration induced a 60% change in retention for the same solutes. Furthermore, both the concentration and composition of the supporting electrolyte affected retention in a manner that varied with the charge of the analyte and applied potential. This behavior is explained using Gouy-Chapman diffuse double layer theory, coupled with comparisons of this theory with closely related models for ion-pair chromatography. Insights into the retention mechanism reveal that an ion-exchange mechanism controls the retention of negatively charged solutes at applied potentials removed from the potential of zero charge (PZC). At potentials close to the PZC, the electrostatic model is less effective with the predominant retention mechanism likely involving hydrophobic interactions with the carbonaceous stationary phase. The combined effects of these findings are demonstrated by using a temporal gradient in supporting electrolyte concentration to optimize an EMLC separation.