Synthesis,photopolymerization, and adhesive properties of hydrolytically stable phosphonic acid‐containing (meth)acrylamides

Three novel dental monomers containing phosphonic acid groups ( 1a and 2a , based on diethyl amino(phenyl)methylphosphonate and 3a based on diethyl 1‐aminoheptylphosphonate) were synthesized in two steps: the reaction of α‐aminophosphonates with acryloyl chloride (for monomers 1a and 3a ) or methacryloyl chloride (for 2a ) to give monomers with phosphonate groups, and the hydrolysis of phosphonate groups by using trimethyl silylbromide. Their (and the intermediates') structures were confirmed by FTIR, ¹H, ¹³C, and ³¹P NMR spectroscopy. All the monomers dissolve well in water (1<pH<2) and are hydrolytically stable. Their homo‐ and copolymerizations with 2‐hydroxyethyl methacrylate (HEMA) and HEMA/glycerol dimethacrylate were investigated with photo‐DSC. Thermal polymerization of the new monomers in water or in ethanol/water solution was investigated, giving polymers in good yields. X‐ray diffraction results showed only dicalcium phosphate dehydrate formation upon interaction of 1a ‐ 3a with hydroxyapatite indicating its strong decalcification and that monomer‐Ca salts are highly soluble. Some results were also compared to those with a bisphosphonic acid‐containing methacrylamide ( 4a ) previously reported; and the influence of monomer structure on polymerization/adhesive properties is discussed. These properties, especially hydrolytic stability and good rates of polymerization, make these new monomers suitable candidates as components of dental adhesive mixtures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 511–522     

18FDG conjugated magnetic nanoparticle probes: synthesis and in vitro investigations on MCF-7 breast cancer cells

¹⁸FDG conjugated magnetic iron oxide nanoparticles (MNPs) were synthesized as PET-MR hybrid imaging agent. Synthesized and characterized NPs were then applied to MCF-7 human breast cancer cells. ¹⁸FDG conjugated MNPs exhibited the cell incorporation ratio up to 30 %. As well as the characterization studies, apoptotic effects were observed depending on the cellular incorporations by the time. In conclusion, synthesized structures could have a potential as hybrid imaging agent in PET-MR imaging systems besides apoptotic effect on cancer cells.     

Thermal and magnetothermal properties of La0.5Pr0.5Mn2Si2

The thermal and magnetothermal properties of La_0.5Pr_0.5Mn₂Si₂ and isostructural LaFe₂Si₂ intermetallic compounds in the temperature range 4.5-303 K are reported with and without applied magnetic field. The electronic, lattice, and magnetic contributions to the heat capacity of La_0.5Pr_0.5Mn₂Si₂ are determined and analyzed. We have determined and from heat capacity experiments; the values are in line with those from the magnetization measurements. We conclude that in order to observe the anomaly in the heat capacity data around in the system, the transition around should occur in a narrow temperature interval.     

Density functional theory study of interactions between carbon dioxide and functionalized polyhedral oligomeric silsesquioxanes

Polyhedral Oligomeric Silsesquioxanes (POSS) are cage‐structured inorganic–organic hybrid materials which can be used in various industrial applications. It is recently discovered that POSS structures with certain functional groups can be solubilized in supercritical CO₂ allowing their applications in environmentally benign supercritical processing of materials. In this theoretical study, nature and energetics of the interactions of octatrifluoropropyl POSS, octatrifluoromethyl POSS, and octamethyl POSS with CO₂ are investigated according to the principles of density functional theory (DFT) by use of Gaussian 09 software. Simulations show that CO₂‐octamethyl POSS pair has hydrogen bonding between the O atom of CO₂ and the H atom of the methyl group, and CO₂‐octatrifluoromethyl POSS pair has interactions between the C atom of CO₂ and the F atom of the trifluoromethyl group. CO₂‐octatrifluoropropyl POSS pair is found to have both interaction types. The octamethyl, the octatrifluoromethyl and the octatrifluoropropyl POSS structures have interaction energies of ?2.18 kcal/mol, ?3.10 kcal/mol, and ?3.77 kcal/mol, respectively. This shows that the presence of Lewis acid–Lewis base interaction between C and F instead of hydrogen bonding between O and H atoms enhances the interaction of the molecule with CO₂, while the presence of both interactions between the octatrifluoropropyl POSS‐CO₂ pair makes the intermolecular interaction even stronger.     

Computer-aided prediction and cytotoxicity evaluation of dithiocarbamates of 9,10-anthracenedione as new anticancer agents

Anticancer activity as an associated action for a series of dithiocarbamates of 9,10-anthracenedione was predicted using the PASS computer program and analysed with PharmaExpert software. The predicted cytotoxic activity of the dithiocarbamate derivatives of 9,10-anthracenedione was evaluated in vitro on cancer cells of the human lung (A549), prostate (PC3), colon (HT29) and human breast (MCF7) using the sulforhodamine B (SRB) cell viability assay. Among these compounds, 9,10-dioxo-9,10-dihydroanthracen-1-yl pyrrolidin-1-carbodithioate and 9,10-dioxo-9,10-dihydroanthracen-2-yl pyrrolidin-1-carbodithioate were identified as the most potent anticancer agents with cytotoxic activity against the MCF-7 human breast cell line with GI₅₀ values of 1.40 μM and 1.52 μM, whereas the GI₅₀ value for the reference anticancer drug mitoxantrone was 3.93 μM. Thus, anticancer activity predicted by PASS with a probability Pa > 30% was confirmed by the experiment. Relatively small Pa values estimated by PASS indicated the novelty of the considered derivatives comparing to the compounds from the PASS training set.     

Sol–gel derived silver-incorporated titania thin films on glass: bactericidal and photocatalytic activity

Titanium dioxide (TiO₂) and silver-containing TiO₂ (Ag-TiO₂) thin films were prepared on silica pre-coated float glass substrates by a sol–gel spin coating method. The bactericidal activity of the films was determined against Staphylococcus epidermidis under natural and ultraviolet (UV) illumination by four complementary methods; (1) the disk diffusion assay, (2) UV-induced bactericidal test, (3) qualitative Ag ion release in bacteria inoculated agar media and (4) surface topographical examination by laserscan profilometry. Photocatalytic activity of the films was measured through the degradation of stearic acid under UV, solar and visible light conditions. The chemical state and distribution of Ag nanoparticles, as well as the structure of the TiO₂ matrix, and hence the bactericidal and photocatalytic activity, is controlled by post-coating calcination treatment (100–650 °C). Additionally, under any given illumination condition the Ag-incorporated films were found to have superior bactericidal and photocataltyic activity performance compared to TiO₂ thin films. It is shown that with optimized thin film processing parameters, both TiO₂ and Ag-TiO₂ thin films calcined at 450 °C were bactericidal and photocatalytically active.     

Structure of [C4mpyr][NTf2] room-temperature ionic liquid at charged gold interfaces

The structure of 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C(4)mpyr][NTf(2)]) room-temperature ionic liquid at an electrified gold interface was studied using neutron reflectometry, cyclic voltammetry, and differential capacitance measurements. Subtle differences were observed between the reflectivity data collected on a gold electrode at three different applied potentials. Detailed analysis of the fitted reflectivity data reveals an excess of [C(4)mpyr](+) at the interface, with the amount decreasing at increasingly positive potentials. A cation rich interface was found even at a positively charged electrode, which indicates a nonelectrostatic (specific) adsorption of [C(4)mpyr](+) onto the gold electrode.     

Effect of the number of iron oxide nanoparticle layers on the magnetic properties of nanocomposite LbL assemblies

Aqueous colloidal suspension of iron oxide nanoparticles has been synthesized. Z-potential of iron oxide nanoparticles stabilized by citric acid was −35±3 mV. Iron oxide nanoparticles have been characterized by the light scattering method and transmission electron microscopy. The polyelectrolyte/iron oxide nanoparticle thin films with different numbers of iron oxide nanoparticle layers have been prepared on the surface of silicon substrates via the layer-by-layer assembly technique. The physical properties and chemical composition of nanocomposite thin films have been studied by atomic force microscopy, magnetic force microscopy, magnetization measurements, Raman spectroscopy. Using the analysis of experimental data it was established, that the magnetic properties of nanocomposite films depended on the number of iron oxide nanoparticle layers, the size of iron oxide nanoparticle aggregates, the distance between aggregates, and the chemical composition of iron oxide nanoparticles embedded into the nanocomposite films. The magnetic permeability of nanocomposite coatings has been calculated. The magnetic permeability values depend on the number of iron oxide nanoparticle layers in nanocomposite film.     

The equivalence of generalized Hölder and Cesáro matrices

We show that the generalized Hölder and Cesáro matrices of order α > −1 are equivalent. We also show that the corresponding is true for doubly infinite generalized Hölder and Cesáro matrices.     

Multiplication operators on Lorentz-Karamata-Bochner spaces

In this small note, we will characterize the boundedness, compactness and closedness of the range of the multiplication operators on Lorentz-Karamata-Bochner spaces L _p,q;b (Ω,X) for p, q ∈ (0,∞].