Kinetics of free radical polymerization—XXXI. Solvent effect on the polymerization rate of ethyl acrylate

The free radical polymerization of ethyl acrylate was investigated in benzene and dimethyl formamide solutions at 50°. The effects of initiator and monomer concentration were studied over a wide range. The overall rate of polymerization was proportional to (initiator concentration)^{$\text{1}\text{2}$} but not to the concentration of the monomer. We attempted to interpret this solvent effect on the basis of (i) the diffusion theory, (ii) the theory of charge transfer complexes and (iii) the theory of hot radicals. Our experimental results could only be explained quantitatively in terms of hot radicals.     

Determination of dissolved inorganic phosphorus in natural waters at nanomolar concentrations using a long capillary cell detector

A high sensitivity spectrophotometric system using a long capillary cell (LCC) detector was developed to determine dissolved inorganic phosphorus (DIP) at nanomolar concentrations in natural waters. The colorimetric chemistry used is based on the classical molybdophosphate blue technique. The radiation source is a near-infrared light-emitting diode and a silicon phototransistor is used as a detector. Method parameters were optimized for the final LCC design. With a 600-mm LCC, a detection limit (twice the standard deviation of the blank) of 1 nmol l^?1 was obtained with a relative standard deviation of 6%. The working range of the instrument is 1–500 nmol l^?1 DIP, and a sample volume of 10 ml is required for each analysis. The technique was applied to both fresh and marine water. The instrument is compact, relatively simple and easy to use in the laboratory and the field.     

Fabrication of lead titanate single crystalline nanowires by hydrothermal method and their characterization

Single crystalline nanowires of lead titanate (PbTiO₃) were fabricated by hydrothermal method at 200°C using lead acetate and n-tetrabutyl titanate as starting materials, where sodium hydroxide was served as a mineralizer. Crystalline phases, microstructure and optical properties of PbTiO₃ nanowires were investigated. The PbTiO₃ nanowires were uniform and continuous along the long axis, and were composed of single crystalline PbTiO₃ with a tetragonal perovskite structure. The diameter of a single nanowire was around 12 nm and the length reached up to 3 μm. The chemical composition of the samples and the valence states of elements were determined by X-ray photoelectron spectroscopy (XPS). The ultraviolet/visible absorption spectroscopic investigation suggested that the absorption edge of optical transition of the first excitonic state occurred at around 320 nm. A blue-green light emission peaking at about 471 nm (2.63 eV) is observed at room temperature, and the intensity of this emission increased with increasing excitation wavelength. Oxygen vacancies are responsible for the light emission of PbTiO₃ nanowires.     

Studies on stereoselective approaches to β-carboline derivatives

Transformation of β-carboline derivatives into optically active entities were studied and the de and ee values of the resulted compounds were detected. Dedicated to Professor Károly Lempert on his 80th birthday.     

Totally selective ring-opening of amino epoxides with ketones: a general entry to enantiopure (2R,3S)- and (2S,3S)-3-aminoalkano-1,2-diols

[Reaction: see text] Transformation of enantiopure diastereoisomers (2R,1'S)- and (2S,1'S)-2-(1-aminoalkyl)epoxides into the corresponding 4-(1-aminoalkyl)-1,3-dioxolanes is achieved by reaction with different ketones in the presence of BF3.Et2O. The conversion takes place in very high yields, total selectivity, and without epimerization. A mechanism to explain this transformation is proposed. The obtained 1,3-dioxolanes can be deprotected, and (2R,3S)- and (2S,3S)-3-aminoalkano-1,2-diols were isolated.     

Gas chromatography/mass spectrometric study of non-commercial C-4-substituted 1,4-dihydropyridines and their oxidized derivatives

A gas chromatography/mass spectrometry (GC/MS) method for the qualitative and quantitative determination of the calcium-channel antagonists C-4-substituted 1,4-dihydropyridines, and their corresponding N-ethyl derivatives, is presented. Also, the electrochemical oxidation and the reactivity of the compounds with alkyl radicals derived from 2,2'-azobis-(2-amidinopropane) were monitored by GC/MS. Mass spectral fragmentation patterns for the C-4-substituted 1,4-dihydropy-ridine parent drugs were significantly different from those of their oxidation products, generated either by electrochemical oxidation or by reaction with alkyl radicals. However, for N-ethyl-1,4-dihydropyridine compounds it was not possible to detect the final products (pyridinium salts) using these experimental conditions.     

Accurate determination of low pK values by (1)H NMR titration

The NMR titration methodology to determine acid dissociation constants in aqueous solutions is extended for pK(a) values between 0 and 2, where potentiometric titrations are no longer applicable. (1)H NMR spectra are acquired for single samples of constant acid concentration (e.g. 0.02M), controlled ionic strength (I=1M with HNO(3)/NaNO(3)) and varying pH. To avoid biased pH readings due to the acid error of the glass electrode, true, concentration-based pH values are deduced by combination of the charge balance equation with information from (1)H NMR chemical shifts of the investigated acid. The method has been tested on histidine (pK(1)=1.83+/-0.02) and yielded the dissociation constant of dichloroacetic acid (pK=1.06+/-0.01) for the first time with good accuracy and precision. Dichloroacetic acid is recommended as an NMR spectroscopical "indicator molecule" for in situ monitoring the pH in strong acidic solutions of other equilibrium systems.     

Slurry nebulization ICP-AES spectrometry method for the determination of tin in organotin(IV) complexes

This paper proposes a quick, novel method for tin determination in organotin chemicals by slurry nebulization inductively coupled plasma atomic emission (ICP-AES) spectrometry. The method was tested by the measurement of five organotin carboxylate complexes of known composition for obtaining simple stoichiometric data. The slurries were prepared by first dissolving the organotins in an adequate solvent (methanol, pyridine or acetone) well miscible with water and then adding this solution drop-by-drop to a 0.005% TX-100 tenzide solution while maintaining intensive mixing. Dynamic laser light scattering experiments showed that the average equivalent particle size in the resulting slurry was ≈0.3 μm for all samples and solvents. Under suitable ICP-AES measuring conditions, the signal recoveries were found to be between 101.8 and 106.6%, which allowed direct nebulization and calibration against aqueous solutions. Typically, 70 μg l⁻¹ detection limit and 1–5% relative S.D. on five replicates can be achieved by the described method.     

Molecular Structure of 1,3,5-Tris (Trimethylstannyl) Benzene: An Electron Diffraction Study

The molecular structure of 1,3,5-tris (trimethylstannyl) benzene has been determined by gas-phase electron diffraction. The C — C bond length is in good agreement with that in benzene. In agreement with the somewhat electron-releasing character of the substituents, the endocyclic bond angles at the substituents are somewhat smaller than 120°. The mean value of Sn — C bond lengths is greater than that in tetraphenyltin and tetramethyltin. The SnMe₃ groups appear freely rotating around the C_aryl — Sn bonds. The following bond lengths (r _g) and bond angles were determined: (Sn — C)_mean 2.150 ± 0.007 Å, C — C 1.399 ± 0.005 Å, (C — H)_mean 1.105 ± 0.006 Å, < C — C(Sn) — C 117.7 ± 1.7º, < C_aryl — Sn — C_methyl 106.7 ± 0.7º < Sn — C — H 111.5 ± 0.9º.     

Influence of the pyridine methyl substituent position on the chemical changes of the NCS groups in the thermal decomposition of coordination compounds of the type Cu(NCS)2L2

The influence of the position of the CH₃ group in picoline and lutidine ligands on the degree of chemical change of the NCS groups in coordination compounds of the type Cu(NCS)₂L₂ (whereL=2-, 3- and 4-picoline, and 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-lutidine) is dealt with. The most marked effect of the CH₃ group is found to be exerted in position 4. This effect of the methyl group on the degree of chemical change points to the mutual influence of the ligands in coordination compounds of Cu(II).

---

Zusammenfassung Der Artikel befaßt sich mit dem Einfluß der Lage der CH₃ Gruppe in Pikolinen und Lutidinen als Liganden auf den Grad der chemischen Änderungen der Gruppen NSC in Koordinationsverbindungen des Typs Cu(NCS)₂L₂ (L=2-, 3- und 4-Pikoline, 2,3-, 2,4-, 2,5-, 2,6-, 3,4- und 3,5-Lutidine). Der ausgeprägteste Effekt der CH₃ Gruppe wurde in der Position 4 beobachtet. Dieser Einfluß der Methylgruppe auf das Ausmaß der chemischen Änderungen deutet auch auf die gegenseitige Wirkung der Liganden in Koordinationsverbindungen von Cu(II).

---

Résumé L'article a trait à l'influence de la position du groupe CH₂ dans les picolines et lutidines, en tant que ligands, sur le degré des changements chimiques des groupes SCN dans les composés de coordination du type Cu(SCN)₂L₂ (L=2-, 3 et 4-picoline, 2,3-, 2,4-,2,5-, 2,6-, 3,4- et 3,6-lutidine). L'effet le plus prononcé du groupe CH₃ s'observe en position 4. Cette influence du groupe méthyle sur le degré des changements chimiques indique aussi l'influence mutuelle des ligands dans les composés de coordination du Cu(II).

---

- , , NCS Cu(NCS)₂,L₂, L=2-, 3- 4- , 2.3-, 2.4-, 2.5-, 2.6-, 3.4- 3.5-. , 4. Cu(II).