Rationalisation of weak ferromagnetism in manganese(III) chains: the relation between structure and ordering phenomena

The synthesis, structure and magnetic properties of the one-dimensional chain compounds [Mn(cyclam)(SO4)]ClO4.H2O (1) and [Mn(cyclam)(HCOO)](CF3SO3)(ClO4) (2) are reported. Cyclam is the cyclic tetradentate ligand 1,4,7,11-tetraazacyclotetradecane. Both chain compounds exhibit antiferromagnetic interactions within the chains. A magnetic ordering phase transition at 5.5 K in (1) is investigated by magnetisation measurements along the three principal crystallographic axes of a single crystal and the results show unambiguously that the ferromagnetic ordering is only taking place along one crystallographic axis. The spin structure of the magnetic ordered phase and the magnitude of the ferromagnetic moment are correlated with the crystal structure and symmetry of the compound.     

Activation analysis of alkaline rocks. A comparison between destructive and non-destructive methods

The United States Geological Survey reference sample AGV-1 andesite, and three alkaline rocks from the apatite mine of Jacupiranga, Brasil, were analyzed by thermal neutron activation analysis using destructive and non-destructive methods, and high resolution Ge(Li) gamma-ray detectors. One of the rocks, a carbonatite, was also analyzed by instrumental activation analysis with epithermal neutrons. A greater number of elements can be determined using the radiochemical separation, but the precision and accuracy attained by INAA and RNAA were of the same order for most of the elements analyzed. Epithermal activation was more advantageous for tantalum, terbium and holmium. Comparison of the analytical results for USGS reference sample (AGV-1) with the data published by others gave good agreement. Statistical tests used for comparison of the results of destructive and non-destructive methods, as well as other results are presented.     

Synthesis and properties of monodisperse oligofluorene-functionalized truxenes: highly fluorescent star-shaped architectures

This paper describes the strategy toward novel monodisperse, well-defined, star-shaped oligofluorenes with a central truxene core and from monofluorene to quaterfluorene arms. Introduction of solubilizing n-hexyl groups at both fluorene and truxene moieties results in highly soluble, intrinsically two-dimensional nanosized macromolecules T1-T4. The radius for the largest oligomer of ca. 3.9 nm represents one of the largest known star-shaped conjugated systems. Cyclic voltammetry experiments reveal reversible or quasi-reversible oxidation and reduction processes (Eox = +0.74 to 0.80 V, Ered = -2.66 to 2.80 eV vs Fc/Fc+), demonstrating excellent electrochemical stability toward both p- and n-doping, while the band gaps of the oligomers are quite high (EgCV = 3.20-3.40 eV). Close band gaps of 3.05-3.29 eV have been estimated from the electron absorption spectra. These star-shaped macromolecules demonstrate good thermal stability (up to 400-420 degrees C) and improved glass transition temperatures with an increase in length of the oligofluorene arms (from Tg = 63 degrees C for T1 to 116 degrees C for T4) and show very efficient blue photoluminescence (lambdaPL = 398-422 nm) in both solution (PhiPL = 70-86%) and solid state (PhiPL = 43-60%). Spectroelectrochemical experiments reveal that compounds T1-T4 are stable electrochromic systems which change their color reversibly from colorless in the neutral state (approximately 340-400 nm) to colored (from red to purple color; approximately 500-600 nm) in the oxidized state.     

A new approach for the sequential injection spectrophotometric determination of the total antioxidant activity

A sequential injection system based on the ABTS (2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulphonic-acid) methodology was developed. The proposed method, incorporating a mixing chamber in the side port of the selection valve, was evaluated to measure the total antioxidant activity of several beverages and foods.The ABTS⁺ is generated by oxidation of ABTS with potassium persulfate and is reduced in presence of hydrogen-donating antioxidants converting into a colourless product. The applicability of the developed method was tested by measurement of the antioxidant activity of pure compounds as well as by analysing complex food and beverage samples. The antioxidant activity was presented as l(+) ascorbic acid equivalence. The values obtained by this methodology were not significantly different from the results obtained by the original spectrophotometric ABTS assay. For most of the studied antioxidants, antioxidant activity varied with pH and dilution. The proposed SIA system is suitable for screening direct or diluted total antioxidant activity of pure compounds or food samples.     

Spectrophotometric flow injection determination of total phosphorus in beer using on-line UV/thermal induced digestion

A flow injection system for the automatic determination of total phosphorus in beer is described. The developed manifold uses a two-stage photooxidation/thermal digestion procedure together with oxidizing and hydrolyzing reagents to convert all forms of phosphorus compounds to orthophosphate. Polyphosphates are hydrolyzed by acid and heat, and organo-phosphates are digested by UV-catalyzed peroxodisulfate oxidation. The orthophosphate formed is then spectrophotometrically determined by the phosphomolybdenum blue reaction, using stannous chloride as reducing agent. The results obtained for a set of 19 beer samples (with concentrations from 120 to 735 mg P/L) were in good agreement with the reference method, the maximum relative deviation found being 4.7%. Relative standard deviations for ten consecutive determinations were lower than 1.5%, and a detection limit of 1 mg P/L was achieved.     

Ester synthesis catalyzed by Mucor miehei lipase immobilized on magnetic polysiloxane-polyvinyl alcohol particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding with high activity recovered. The performance of the resulting immobilized biocatalyst was evaluated in the synthesis of flavor esters using heptane as solvent. The impact on reaction rate was determined for enzyme concentration, molar ratio of the reactants, carbon chain length of the reactants, and alcohol structure. Ester synthesis was maximized for substrates containing excess acyl donor and lipase loading of 25 mg/mL. The biocatalyst selectivity for the carbon chain length was found to be different concerning the organic acids and alcohols. High reaction rates were achieved for organic acids with 8 or 10 carbons, whereas increasing the alcohol carbon chain length from 4 to 8 carbons gave much lower esterification yields. Optimal reaction rate was determined for the synthesis of butyl caprylate (12 carbons). Esterification performance was also dependent on the alcohol structure, with maximum activity occurring for primary alcohol. Secondary and tertiary alcohols decreased the reaction rates by more than 40%.     

Dissolution of gold in the DMSO—RX systems. The concept of a donor-acceptor electron transport system

Summary The liquid phase oxidation of gold in donor-acceptor organic and aqueous-organic media has been studied. The compounds [AuCl(Me₂S)], [AuBr(Me₂S)], [AuBr₃(Me₂S)], [Me₃S][AuBr₄], [Me₃S][AuBr₄(Me₂S)]·H₂O, [Me₃SO]-[AuBr₄]·H₂O, [Me₃S][Au₂Br₇(Me₂S)₂]·3H₂O, [Me₃S]₂-[Au₂Br₈]·2DMSO·H₂O, [Me₂(Bu)SO][AuBr₄]·H₂O and [Me₃S]Br were isolated by dissolution of Au⁰ in DMSO-RX mixtures (R = H or Bu; X = Cl or Br). The products were characterized by elemental analysis and i.r. spectroscopy. The nature of the Au⁰-DMSO-RX systems and the oxidant species are discussed in terms of a newly-developed concept of donor-acceptor electron transport (DAET) systems.     

Detection of explosives on solid surfaces by thermal desorption and ambient ion/molecule reactions

A simple, fast and direct method is presented for detecting traces of solid explosives on cotton swabs or in particulate samples: ions are transferred into a mass spectrometer after thermal desorption and corona discharge chemical ionization in ambient air; specificity is enhanced using ambient ion/molecule reactions or by conventional tandem mass spectrometry.     

STUDY OF LUMINESCENT FORMS OF THE URANYL ION

Luminescence spectra and luminescence decay kinetics of uranyl sulphate water and uranyl nitrate acetone solutions of different concentrations have been studied. Similar experiments have been done with uranyl sulphate powder under vacuum. It has been experimentally shown that the hydrolysis of uranyl sulphate in water takes place, and under low salt concentrations (0.1-4.0 times 10^-4 M) a luminescence of a basic form of the photoexcited ion with a tentative structure of UO₂OH⁺* has been observed. The luminescence of the acidic form UO⁺* has been observed under higher salt concentrations (1–4 times 10^-2 M) in water and under any salt concentration in acetone. The acidic form has the characteristic emission spectrum possessing vibrational structure. The luminescence concentrational quenching of both photoexcited uranyl forms and exciplex emission have not been observed. The effect of a number of organic quenchers and molecular oxygen on uranyl luminescence has been studied. There is no luminescence quenching by O₂ up to 2 times 10⁶ Pa (20 atm) pressure. The low effectiveness of energy transfer from the photoexcited uranyl forms has been explained in terms of strong steric screening of 5f-uranium (VI) orbital by oxygen atoms and by external filled up uranium electronic shells.     

Preparation of an eight-membered sesquiterpene lactone resulting from sequential Gif System GoAgg(III) and MCPBA oxidation of (+)-10beta,14-dihydroxy-allo-aromadendrane

Studies aimed at a comparison of chemical, biomimetic (Gif system GoAgg(III))and enzymatic (CHMO) transformations of natural (+)-10beta,14-dihydroxy-allo-aromadendrane have led to preparation of an eight-member sesquiterpene lactone.