Synthesis of unstrained Criegee intermediates: inverse α-effect and other protective stereoelectronic forces can stop Baeyer–Villiger rearrangement of γ-hydroperoxy-γ-peroxylactones

How far can we push the limits in removing stereoelectronic protection from an unstable intermediate? We address this question by exploring the interplay between the primary and secondary stereoelectronic effects in the Baeyer–Villiger (BV) rearrangement by experimental and computational studies of γ-OR-substituted γ-peroxylactones, the previously elusive non-strained Criegee intermediates (CI). These new cyclic peroxides were synthesized by the peroxidation of γ-ketoesters followed by in situ cyclization using a BF₃·Et₂O/H₂O₂ system. Although the primary effect (alignment of the migrating C–R_m bond with the breaking O–O bond) is active in the 6-membered ring, weakening of the secondary effect (donation from the OR lone pair to the breaking C–R_m bond) provides sufficient kinetic stabilization to allow the formation and isolation of stable γ-hydroperoxy-γ-peroxylactones with a methyl-substituent in the C6-position. Furthermore, supplementary protection is also provided by reactant stabilization originating from two new stereoelectronic factors, both identified and quantified for the first time in the present work. First, an unexpected boat preference in the γ-hydroperoxy-γ-peroxylactones weakens the primary stereoelectronic effects and introduces a ∼2 kcal mol⁻¹ Curtin–Hammett penalty for reacquiring the more reactive chair conformation. Second, activation of the secondary stereoelectronic effect in the TS comes with a ∼2–3 kcal mol⁻¹ penalty for giving up the exo-anomeric stabilization in the 6-membered Criegee intermediate. Together, the three new stereoelectronic factors (inverse α-effect, misalignment of reacting bonds in the boat conformation, and the exo-anomeric effect) illustrate the richness of stereoelectronic patterns in peroxide chemistry and provide experimentally significant kinetic stabilization to this new class of bisperoxides. Furthermore, mild reduction of γ-hydroperoxy-γ-peroxylactone with Ph₃P produced an isolable γ-hydroxy-γ-peroxylactone, the first example of a structurally unencumbered CI where neither the primary nor the secondary stereoelectronic effect are impeded. Although this compound is relatively unstable, it does not undergo the BV reaction and instead follows a new mode of reactivity for the CI – a ring-opening process.

Protecting stereoelectronic effects prevent Baeyer–Villiger rearrangement and stabilize γ-OX-γ-peroxylactones (X = H, OH), the previously elusive non-strained Criegee intermediates.     

Stimulated Raman scattering measurements of H2 vibration–vibration transfer

We present a new set of V–V rate coefficients for vibrational levels 0–5 in H₂ at 300 K, measured using a stimulated Raman–spontaneous Raman pump/probe apparatus. The measured rate of the non-resonant process, H₂(v = 1) + H₂(v = 1) → H₂(v = 0) + H₂(v = 2), is consistent with the previously reported experimental value of Kreutz et al. However, semi-classical predictions of such non-resonant processes, using the identical inter-molecular potential and methodology to that given by Cacciatore and Billing, results in rates which are too slow, by a factor of approximately 3. For the “resonant” V–V process, H₂(v = 1) + H₂(v = 0) → H₂(v = 0) + H₂(v = 1), the semi-classical rate is found to be too slow by an even larger factor, of approximately 30, compared to the experimental rate, but consistent with the previously reported experimental result of Farrow and Chandler. Further, unlike the semi-classical model prediction in which the (1, 1 → 2, 0) process rate is predicted to exceed that of the (1, 0 → 0, 1) process, the experimental data shows it to be a factor of approximately 2.5 less, suggesting that semi-classical methods that treat the rotational motion classically are unsuitable for the highly anharmonic H₂ molecule. The ratio of pure rotation and rotation–vibration Raman cross sections for scattering from levels 0 and 1 is also determined, with results which agree with calculations of Schwartz and LeRoy, but are somewhat larger than previous experimental results of Cureton.     

Halogens in competition: electronic structure of mixed dihalobenzenes

The electronic structure of all isomeric dihalobenzenes C6H4XY (X, Y = Cl, Br, I) has been investigated by HeI/HeII photoelectron spectroscopy, Green's functions calculations, and comparison with the spectra of related dihalobenzenes C6H4X2 (X = Cl, Br, I). The careful analysis of measured pi orbital and halogen lone pair ionization energies enabled us to describe substituent effects in terms of resonance, inductive, steric, and spin-orbit coupling interactions.     

Molecular Structure and Conformational Composition of 1-[(Methylthio)methyl]-2-nitrobenzene (MTMNB): A Theoretical and Experimental Study

The conformational composition of gaseous MTMNB and the molecular structures of the rotational forms have been studied by electron diffraction at 130^∘C aided by results from ab initio and density functional theory calculations. The conformational potential energy surface has been investigated by using the B3LYP/6-31G(d,p) method. As a result, six minimum-energy conformers have been identified. Geometries of all conformers were optimized using MP2/6-31G(d,p), B3LYP/6-31G(d,p), and B3LYP/cc-pVTZ methods. These calculations resulted in accurate geometries, relative energies, and harmonic vibrational frequencies for all conformers. The B3LYP/cc-pVTZ energies were then used to calculate the Boltzmann distribution of conformers. The best fit of the electron diffraction data to calculated values was obtained for the six conformer model, in agreement with the theoretical predictions. Average parameter values (r_a in angstroms, angle α in degrees, and estimated total errors given in parentheses) weighted for the mixture of six conformers are r(C–C) = 1.507(5), r(C–C)_{ring, av} = 1.397(3), r(C–S)_av = 1.814(4), r(C–N) = 1.495(4), r(N–O)_av = 1.223(3), ∠(C–C–C)_ring = 116.0–122.5, ∠ C6–C4–C7 = 118.2(4), ∠ C–C–S = 113.6(6), ∠ C–S–C = 98.5(12), ∠ N–C–C4 = 121.9(3), ∠(O–N–C)_av = 116.8(3), ∠ O–N–O = 127.0(4). Torsional angles could not be refined. Theoretical B3LYP/cc-pVTZ torsional angles for the rotation about C–N bond, φ_C−N, were found to be 30.5–36.5^∘ for different conformers. As to internal rotation about C–C and C–S bonds, values of φ_C−C = 68–118^∘ and φ_C−S = 66–71^∘ were obtained for the three most stable conformers with gauche orientation with respect to these bonds. Some conclusions of this work were presented in a short communication in Russ. J. Phys. Chem. 2005, 79, 1701.     

Fluorescence resonance energy transfer between quantum dot donors and dye-labeled protein acceptors

We used luminescent CdSe-ZnS core-shell quantum dots (QDs) as energy donors in fluorescent resonance energy transfer (FRET) assays. Engineered maltose binding protein (MBP) appended with an oligohistidine tail and labeled with an acceptor dye (Cy3) was immobilized on the nanocrystals via a noncovalent self-assembly scheme. This configuration allowed accurate control of the donor-acceptor separation distance to a range smaller than 100 A and provided a good model system to explore FRET phenomena in QD-protein-dye conjugates. This QD-MBP conjugate presents two advantages: (1) it permits one to tune the degree of spectral overlap between donor and acceptor and (2) provides a unique configuration where a single donor can interact with several acceptors simultaneously. The FRET signal was measured for these complexes as a function of both degree of spectral overlap and fraction of dye-labeled proteins in the QD conjugate. Data showed that substantial acceptor signals were measured upon conjugate formation, indicating efficient nonradiative exciton transfer between QD donors and dye-labeled protein acceptors. FRET efficiency can be controlled either by tuning the QD photoemission or by adjusting the number of dye-labeled proteins immobilized on the QD center. Results showed a clear dependence of the efficiency on the spectral overlap between the QD donor and dye acceptor. Apparent donor-acceptor distances were determined from efficiency measurements and corresponding F?rster distances, and these results agreed with QD bioconjugate dimensions extracted from structural data and core size variations among QD populations.     

Förster Resonance Energy Transfer Investigations Using Quantum‐Dot Fluorophores

F?rster resonance energy transfer (FRET), which involves the nonradiative transfer of excitation energy from an excited donor fluorophore to a proximal ground-state acceptor fluorophore, is a well-characterized photophysical tool. It is very sensitive to nanometer-scale changes in donor-acceptor separation distance and their relative dipole orientations. It has found a wide range of applications in analytical chemistry, protein conformation studies, and biological assays. Luminescent semiconductor nanocrystals (quantum dots, QDs) are inorganic fluorophores with unique optical and spectroscopic properties that could enhance FRET as an analytical tool, due to broad excitation spectra and tunable narrow and symmetric photoemission. Recently, there have been several FRET investigations using luminescent QDs that focused on addressing basic fundamental questions, as well as developing targeted applications with potential use in biology, including sensor design and protein conformation studies. Herein, we provide a critical review of those developments. We discuss some of the basic aspects of FRET applied to QDs as both donors and acceptors, and highlight some of the advantages offered (and limitations encountered) by QDs as energy donors and acceptors compared to conventional dyes. We also review the recent developments made in using QD bioreceptor conjugates to design FRET-based assays.     

Electronic state of Fe used as Mössbauer probe in the perovskites LaMO3 (M=Ni and Cu)

For the first time a comparative study of rhombohedral LaNiO₃ and LaCuO₃ oxides, using ⁵⁷Fe Mössbauer probe spectroscopy (1% atomic rate), has been carried out. In spite of the fact that both oxides are characterized by similar crystal structure and metallic properties, the behavior of ⁵⁷Fe probe atoms in such lattices appears essentially different. In the case of LaNi_0.99Fe_0.01O₃, the observed isomer shift (δ) value corresponds to Fe³⁺ (3d⁵) cations in high-spin state located in an oxygen octahedral surrounding. In contrast, for the LaCu_0.99Fe_0.01O₃, the obtained δ value is comparable to that characterizing the formally tetravalent high-spin Fe⁴⁺(3d⁴) cations in octahedral coordination within Fe(IV) perovskite-like ferrates. To explain such a difference, an approach based on the qualitative energy diagrams analysis and the calculations within the cluster configuration interaction method have been developed. It was shown that in the case of LaNi_0.99Fe_0.01O₃, electronic state of nickel is dominated by the d⁷ configuration corresponding to the formal ionic “Ni³⁺-O²⁻” state. On the other hand, in the case of LaCu_0.99Fe_0.01O₃ a large amount of charge is transferred via Cu-O bonds from the O:2p bands to the Cu:3d orbitals and the ground state is dominated by the d⁹L configuration (“Cu²⁺−O” state). The dominant d⁹L ground state for the (CuO₆) sublattice induces in the environment of the ⁵⁷Fe probe cations a charge transfer Fe³⁺+O⁻(L)→Fe⁴⁺+O²⁻, which transforms “Fe³⁺” into “Fe⁴⁺” state. The analysis of the isomer shift value for the formally “Fe⁴⁺” ions in perovskite-like oxides clearly proved a drastic influence of the 4s iron orbitals population on the Fe−O bonds character.     

Synthesis, excited-state dynamics, and reactivity of a directly-linked pyromellitimide-(porphinato)zinc(II) complex

N-[5-(10,20-Diphenylporphinato)zinc(II)]-N'-(octyl)pyromellitic diimide (PZn-PI), a meso-pyromellitimide-substituted (porphinato)zinc(II) compound, has been fabricated from the reaction of (5-amino-10,20-diphenylporphinato)zinc(II) with pyromellitic dianhydride in the presence of octylamine. Interrogation of the photoinduced charge separation (CS) and thermal charge recombination (CR) electron-transfer (ET) dynamics for PZn-PI in CH(2)Cl(2) via pump-probe transient absorption spectroscopic methods shows that tau(CS) and tau(CR) are 770 and 5200 fs, respectively. These ET dynamics differ from those elucidated previously for closely related 5-quinonyl-substituted (porphinato)metal compounds, and derive from the fact that the low-lying excited states for PZn-PI are porphyrin-localized, possessing little charge-transfer character. The synthesis of N-(5-[15-(2-(triisopropylsilyl)ethynyl)-10,20-diphenylporphinato]zinc(II))-N'-(octyl)pyromellitic diimide demonstrates that PZn-PI can be halogenated at its 15-meso-position and used subsequently as a substrate in metal-catalyzed cross-coupling reactions; the reactivity of PZn-PI is unusual with respect to many directly linked donor-acceptor compounds in that it is stable to these oxidizing and reducing reaction conditions.     

Voltammetric behavior of zaleplon and its differential pulse polarographic determination in capsules

In this work both the electrochemical behavior and the analysis of the hypnotic pyrazolopyrimidine derivative zaleplon were studied. Zaleplon in ethanol-0.1M Britton Robinson buffer solution (30-70) showed 2 irreversible, well-defined cathodic responses in the pH range of 2-12 using differential pulse polarography (DPP), tast polarography, and cyclic voltammetry. From chronocoulometric studies, it was possible to conclude that one electron was transferred in each reduction peak or wave. For analytical purposes, the DPP technique working at pH 4.5 for peak I was selected, which exhibited adequate repeatability, reproducibility, and selectivity. The recovery was 99.97 +/- 1.52%, and the detection and quantitation limits were 5.13 x 10(-7)M and 1.11 x 10(-6)M, respectively. The DPP method was applied successfully to the individual assay of capsules in order to verify the content uniformity of zaleplon. Treatment of the sample is not required because the excipients do not interfere, the method is not time consuming, and it is less expensive than column liquid chromatography.