Association Equilibrium of Methylene Blue by Spectral Titration and Chemometrics Analysis: A Thermodynamic Study

The monomer‐dimer equilibrium of methylene blue (MB, Scheme I) has been investigated by means of UV‐Visible spectroscopy in aqueous solutions. The self aggregation of MB in water has been investigated by recording absorption spectra in the wavelength range of 450–750 nm, and in different ionic strengths using concentrated KCl solutions in the temperature range of 20–90°C. Chemometrics analysis of the spectral data gave a dimerization constant, individual spectra of the monomer and dimer forms of the dye molecule. The quantitative analysis of the data of the undefined mixture was carried out by simultaneous resolution of the overlapping spectral bands in the whole set of absorption spectra. The dimerization constants of MB determined by mathematical deconvolution of the thermometric spectral titration data show dependency on temperature variations. The concentration range of MB was 6.00 × 10^?5‐3.00 × 10^?4 M. Utilizing the van't Hoff relation, which describes the dependence of the equilibrium constant on temperature, the thermodynamics parameters ΔH° and ΔS° of the aggregation process were determined. The compensation effect was verified by the thermodynamics results of the dimerization process of the dye.     

Voltammetric sensor for glutathione determination based on ferrocene-modified carbon paste electrode

The electrocatalytic oxidation of glutathione (GSH) has been studied at the surface of ferrocene-modified carbon paste electrode (FMCPE). Cyclic voltammetry (CV), double potential step chronoamperometry, and differential pulse voltammetry (DPV) techniques were used to investigate the suitability of incorporation of ferrocene into FMCPE as a mediator for the electrocatalytic oxidation of GSH in buffered aqueous solution. Results showed that pH 7.00 is the most suitable for this purpose. In the optimum condition (pH 7.00), the electrocatalytic ability of about 480 mV can be found and the heterogeneous rate constant of catalytic reaction was calculated as . Also, the diffusion coefficient of glutathione, D, was found to be 3.61 × 10^–5 cm² s⁻¹. The electrocatalytic oxidation peak current of glutathione at the surface of this modified electrode was linearly dependent on the GSH concentration and the linear analytical curves were obtained in the ranges of 3.2 × 10^–5 M–1.6 × 10^–3 M and 2.2 × 10^–6 M–3.5 × 10^–3 M with cyclic voltammetry and differential pulse voltammetry methods, respectively. The detection limits (3σ) were determined as 1.8 × 10^–5 M and 2.1 × 10^–6 M using CV and DPV, respectively. Finally, the electrocatalytic oxidation of GSH at the surface of this modified electrode can be employed as a new method for the voltammetric determination of glutathione in real samples such as human plasma.     

Voltammetric sensor for nitrite determination based on its electrocatalytic reduction at the surface of p-duroquinone modified carbon paste electrode

A p-duroquinone (tetramethyl-p-benzoquinone) modified carbon paste electrode (DMCPE) was employed to study the electrocatalytic reduction of nitrite in aqueous solutions using cyclic voltammetry (CV), double potential-step chronoamperometry, and differential pulse voltammetry (DPV). It has found that under an optimum condition (pH 1.00), the reduction of nitrite at the surface of DMCPE occurs at a potential of about 660 mV less negative than that of an unmodified carbon paste electrode (CPE). The catalytic rate constant, k′_h, based on Andrieux and Saveant theoretical model was calculated as for scan rate 10 mV s^-1. Also, the apparent diffusion coefficient, D _app, was found as 2.5 × 10^–10 and 3.61 × 10^–5 cm² s^-1 for p-duroquinone in carbon paste matrix and nitrite in aqueous buffered solution, respectively. The values for αn_α were estimated to be −0.65 and −0.19 for the reduction of nitrite at the surface of DMCPE and CPE, respectively. The electrocatalytic reduction peak currents showed a linear dependence on the nitrite concentration, and a linear analytical curve was obtained in the ranges of 5.0 × 10^–5 M to 8.0 × 10^–3 M and 6.0 × 10^–6 M to 8.0 × 10^–4 M of nitrite concentration with CV and DPV methods, respectively. The detection limits (2σ) were determined as 2.5 × 10^–5 M and 4.3 × 10^–6 M by CV and DPV methods. This method was also applied as a simple, selective and precise method for determination of nitrite in real samples (the weak liquor from the wood and paper factory of Mazandaran province in Iran) by using a standard addition method.     

Prime filtrations and Stanley decompositions of squarefree modules and Alexander duality

In this paper we study how prime filtrations and squarefree Stanley decompositions of squarefree modules over the polynomial ring and over the exterior algebra behave with respect to Alexander duality. The results which we obtained suggest a lower bound for the regularity of a \mathbb Zⁿ{\mathbb {Z}^n}-graded module in terms of its Stanley decompositions. For squarefree modules this conjectured bound is a direct consequence of Stanley’s conjecture on Stanley decompositions. We show that for pretty clean rings of the form R/I, where I is a monomial ideal, and for monomial ideals with linear quotient our conjecture holds.     

Using chemometric methods for overlap correction of sodium–zinc spectral lines generated by wavelength dispersive X‐ray fluorescence in mineral samples

Partial least squares, principal component regression and support vector machine multivariate methods were used for overlap correction of sodium–zinc (Na(Kα)–Zn(Lα)) spectral lines generated by means of wavelength dispersion X‐ray fluorescence (WDXRF) combined with standard‐less software (IQ+) technique for the analyses of mineral samples. This methodology uses one scan channel using PX1 analyzer crystal, 550‐µm collimator, flow detector (Ar + CH₄), and rhodium (Rh) tube for determination of Na and Zn in mineral compositions in minimum time. The calibration matrix was made up of 35 samples containing different amounts of Na₂O and ZnO. The considered concentration ranges were 0–5% for both Na₂O and ZnO. The values for 2θ angle were recorded between 25° and 29.9° at every 0.1°. Variable tube powers (kV ? mA) were used to investigate the effect of tube power on the analyses of elements. The validation of the multivariate methods was realized by analyzing soil samples. Atomic absorption and flame photometry methods were used as reference methods for analyzing Zn and Na in the soil samples, respectively. The results of using chemometric methods, WDXRF (standard‐less software) and reference method determined partial least squares and support vector machine models obtained more acceptable results for Na₂O in presence of ZnO than those of WDXRF (standard‐less software). Copyright © 2013 John Wiley & Sons, Ltd.     

Simultaneous spectrophotometric determination of uranium and zirconium using cloud point extraction and multivariate methods

A cloud point extraction (CPE) process using the nonionic surfactant Triton X-114 to simultaneous extraction and spectrophotometric determination of uranium and zirconium from aqueous solution using partial least squares (PLS) regression is investigated. The method is based on the complexation reaction of these cations with Alizarin Red S (ARS) and subsequent micelle-mediated extraction of products. The chemical parameters affecting the separation phase and detection process were studied and optimized. Under the optimum experimental conditions (i.e. pH 5.2, Triton X-114?=?0.20%, equilibrium time 10?min and cloud point 45?°C), calibration graphs were linear in the range of 0.01?C3?mg?L^?1 with detection limits of 2.0 and 0.80???g L^?1 for U and Zr, respectively. The experimental calibration set was composed of 16 sample solutions using an orthogonal design for two component mixtures. The root mean square error of predictions (RMSEPs) for U and Zr were 0.0907 and 0.1117, respectively. The interference effect of some anions and cations was also tested. The method was applied to the simultaneous determination of U and Zr in water samples.     

The effect of high dose of gamma-irradiation on residual radicals concentration in ultra-high molecular weight polyethylene (UHMWPE) in the presence of vitamin E

Powder samples of UHMWPE (GUR 1020) containing 0.1% by wt. vitamin E (??-tocopherol, ??-T) were irradiated at room temperature in air for doses of 30-kGy, 65-kGy or 100-kGy (⁶⁰Co). After irradiation, they were stored at ?78.5°C (dry ice temperature) for one year and then opened to air at room temperature. Following the decay of the primary alkyl and allyl radicals (at room temperature in air), growth of the carbon-centered polyenyl R1 (?^·CH?CH=CH?, m ?? 3), and the oxygen-centered dior tri-enyl R2 (?^·OCH?CH=CH? _m , m ?? 3) residual radicals were measured for eight weeks. An X-band electron spin resonance (ESR) spectrometer was used for radical measurements. The initial relative radical concentrations (R2/R1) were found to be 10.13, 4.6 and 3.7 for the 65-kGy, 30-kGy and 100-kGy samples, respectively. R1 and R2 were both found to grow significantly in the 65-kGy samples while they grew only slightly in the 30-kGy and 100-kGy samples. In 65-kGy sample, R1 grew faster than R2 and the relative concentration R2/R1 was reduced from 10.13 to 2.9 for the 65-kGy sample while that for the 30-kGy and 100-kGy samples reduced only slightly, from 4.6 to 3.5 and 3.7 to 3.2, respectively. The behavior of the residual radicals can be explained by Raman spectroscopic data which suggest that the 65-kGy samples had a higher percentage of amorphous regions when compared to the 30-kGy or 100-kGy (21.7% compared to 15.7% or 17.9%) and also suggest a lower percentage of inter-phase regions (16.4% compared to 25.6% or 17.5%) and a lower level of structural disorder (0.26% compared to 0.44% or 0.27%).     

Production of Microbial Cellulose by a Bacterium Isolated from Fruit

This study presents the production of bacterial cellulose (BC) by a bacterium isolated from a rotten fruit and its process optimization. Here, isolation and screening of potent cellulose producers were carried out from different natural sources, viz., soil, rotten fruits, and vegetables and vinegar. A total of 200 bacterial isolates were obtained, which were screened for cellulose production using Hestrin?CSchramm medium. A novel and potent cellulose-producing bacterium was newly isolated from a rotten fruit and identified as Gluconacetobacter sp. F6 through 16S ribosomal DNA sequencing and morphological, cultural, and biochemical characteristics. After optimization of culture conditions, including pH, temperature, agitation, carbon/nitrogen sources, and inducers, the BC production was greatly increased from 0.52 to 4.5?g/l (8.65-fold increase). The optimal culture medium contained 1% (w/v) glucose, 1.5% (w/v) yeast extract, 0.5% (w/v) peptone, 0.27% (w/v) disodium hydrogen phosphate, 0.115% (w/v) citric acid, and 0.4% (w/v) ethanol. BC produced was analyzed for the presence of cellulose fibrils by epiflourescent microscopy using Calcofluor white stain and scanning electron microscopy and confirmed by NMR. There are very scanty reports about the optimization of BC production by bacteria isolated from rotten fruits.     

Dodecylphosphonic acid (DPA): a highly efficient catalyst for the synthesis of 2H-indazolo[2,1-b]phthalazine-triones under solvent-free conditions

A new green protocol has been developed for the synthesis of 2H-indazolo[2,1-b]phthalazine-triones via one-pot, three-component condensation reaction of aromatic aldehydes with 1,3-dicarbonyl compounds and phthalhydrazide using reusable dodecylphosphonic acid (DPA) as heterogeneous solid acid catalyst under solvent-free conditions. This protocol provides a novel and improved method for obtaining 2H-indazolo[2,1-b]phthalazine-triones in terms of good yields with little catalyst loading.