Melting behavior of poly(oxytetramethylene)-<Emphasis Type="Italic">alt</Emphasis>-(aromatic oligoamide) block copolymers

Using temperature-modulated differential scanning calorimetry, the melting behaviour of poly(oxytetramethylene)-alt-(aromatic oligoamide) (POTM-alt-AOA) has been studied in comparison with that of polyoxytetramethylene glycohols (POTMGs). The apparent melting temperature of the block copolymers is found to be less than that of the corresponding POTMGs by approximately 30°C. The relaxation time of melting of a POTM segment has been estimated and compared with that of POTMG. The relaxation time of POTM-alt-AOA is slightly shorter than that of POTMG when the molar mass of the POTM segment is 2900; however, it is longer when the molar mass is 1400.     

Growth and characterisation of Eu doped GaN thin films

We have studied the optical properties of Eu doped GaN thin films. We have grown high quality Eu doped GaN thin films by using Gas Source Molecular Beam Epitaxy (GSMBE), with 1.4% Eu concentration. The Full Width at Half Maximum (FWHM) of the X-ray diffraction in an omega scan was found to be 288 arcsecs. Low Eu concentration (0.08%) doped GaN thin films were grown, where Eu-related photoluminescence at 622 and 613 nm was detected using above band-gap excitation at 2 K. For high Eu concentration of 30% GaN:Eu crystal photoluminescence (PL) and cathodoluminescence (CL) spectra show strong and intense transitions at 622 and 664 nm, but also at 593 nm for CL spectra, with a similar transition observed from the low Eu concentration sample.     

High pressure elastic and plastic deformations of silica: In situ diamond anvil cell Raman experiments

Normal silica glass is usually referred to as low density amorphous silica as it can be converted to high density amorphous silica by a hydrostatic pressure (polyamorphic transition). In this work in situ Raman experiments are performed in a diamond anvil cell up to 18 GPa. The pressure effects on the structure of silica after successive compression decompression experiments are analyzed. The mode Grüneisen parameters corresponding to the elastic compression of high density amorphous silica are obtained and compared with those of normal silica. A reorganization of the high density amorphous silica below 3 GPa is evidenced.     

Predicting the onset of DNA supercoiling using a non-linear hemitropic elastic rod

Elastic rod models provide a means to interpret single molecule DNA experiments as well as predict DNA behavior under physiological conditions. Here we use an elastic rod model to predict the stability boundary (critical torque vs. applied tension) for single molecule DNA experiments in which the molecule is subjected to applied tension and twist. We discuss the shortcomings of the usual isotropic rod model. We then derive a consistent non-linear material law from the general representation for a hemitropic (chiral) rod. Finally, we present results of a standard bifurcation analysis predicting the stability boundary. We find results from the non-linear hemitropic rod to match the data closely.     

Geometry and electronic structure of a heterometallic cluster Mo<Subscript>2</Subscript>Mg<Subscript>2</Subscript> in different oxidation states of Mo: a DFT study

Reduction of tetranuclear heterometallic complex Mo₂Mg₂ was simulated using the B3LYP and PBE density functional methods. The results of geometry calculations of the initial complex [Mo^VIO₂Mg(MeOH)₂(OMe)₄]₂ and a partially reduced Mo^V complex are in good agreement with experimental data. The reduced Mo^III complex is characterized by a decrease in the binding energy of aqua ligands. Structural rearrangement of the complex with release of a coordination position at the Mo atoms requires small energy expenditure. One can assume that the reduction of the polynuclear complex causes overcrowding of its coordination sphere, which favors formation of dinitrogen complexes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 441–457, March, 2008.     

Study on Inhibitors of Methionine Synthase Ⅷ: Synthesis of 2,5-Diamino-4-oxo-6- (3-butenyl) pyrimidine

Cobalamin-dependent methionine synthase plays a crucial role in folate metabolism and such would appear to be an excellent target for rational antifolate drug design. However, to date, no anticancer agents directed at this enzyme are available, but the enzyme is efficiently and specifically inhibited by N2O and this has proven invaluable for evaluating the biochemical consequence of enzyme inhibition and for mechanistic studies. [1,2] 2,5-Diamino-4-oxo-6-(3-butenyl) pyrimidine, a key intermediate in synthetic inhibitors of methionine synthase, was first synthesized using γbutenyl-β-ketoester and guanidine carbonate (Scheme 1). [3]     

Basins of Attraction of Periodic Oscillations in Suspension Bridges

We consider the dynamics of the lowest order transversal vibration mode of a suspension bridge, for which the hangers are treated as one-sided springs, according to the model of Lazer and McKeena [SIAM Review 58, 1990, 537]. We analyze in particular the multi-stability of periodic attractors and the basin of attraction structure in phase space and its dependence with the model parameters. The parameter values used in numerical simulations have been estimated from a number of bridges built in the United States and in the United Kingdom, thus taking into account realistic, yet sometimes simplified, structural, aerodynamical, and physical considerations.     

Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

Model based online diagnosis of unbalance and transverse fatigue crack in rotor systems

A model based technique for online identification of malfunctions in rotor systems is discussed. Presence of fault changes the dynamic behavior of the system. This change is taken into account by equivalent loads acting on the undamaged system model. Equivalent loads are fictitious forces and moments acting on the undamaged system model, which generate a dynamic behavior identical to that of the real damaged system. The mathematical representation of equivalent loads is referred to as Fault Model. The work focuses on developing a fault model for a transverse fatigue crack in shaft and testing it through simulated studies. The basic principle of the technique is validated for unbalance identification, through numerical simulations as well as by experiments on a real rotor system.