Phase transformation of Ni-B, Ni-P diffusion barrier deposited electrolessly on Cu interconnect

In this paper, we report that the phase transformation of Ni-B, Ni-P diffusion barriers deposited electrolessly on Cu, for the reason that the Ni-P layer is a more effective diffusion barrier than the Ni-B layer. The Ni₃B crystallized was decomposed to Ni and B₂O₃ above 400 °C and the Ni₃P crystallized was decomposed to Ni and P₂O₅ above 600 °C respectively in Ar atmosphere. Also, the Ni₃B was decomposed to Ni and free B above 400 °C and the Ni₃P was decomposed to Ni and free P above 600 °C respectively in H₂ atmosphere. The decomposed Ni formed a solid solution with Cu. The Cu diffusion occurred above 400 °C for Ni-B layer and above 600 °C for Ni-P layer, respectively. Because the decomposition temperature of Ni-P layer is about 200 °C higher than that of Ni-B layer, the Ni-P layer is a more effective barrier for Cu than the Ni-B layer.     

Synchronization of Genesio chaotic system via backstepping approach

Backstepping design is proposed for synchronization of Genesio chaotic system. Firstly, the control problem for the chaos synchronization of nominal Genesio systems without unknown parameters is considered. Next, an adaptive backstepping control law is derived to make the error signals between drive Genesio system and response Genesio system with an uncertain parameter asymptotically synchronized. Finally, the approach is extended to the synchronization problem for the system with three unknown parameters. The stability analysis in this article is proved by using a well-known Lyapunov stability theorem. Note that the approach provided here needs only a single controller to realize the synchronization. Two numerical simulations are presented to show the effectiveness of the proposed chaos synchronization scheme.     

146Ce核的八级形变带和准γ带

通过测量²⁵²Cf自发裂变所产生的瞬发γ射线, 对¹⁴⁶Ce核的高自旋结构进行了重新研究, 结果更新了以前报道的能级纲图, 把八级形变集体带扩展到更高的自旋, 并且重新构建了可能的准γ带结构. 此外, 用反射不对称壳模型(RASM)对¹⁴⁶Ce核的八级形变带进行了计算, 低自旋处的计算结果与实验数据符合得很好.     

Bimodal fission in binary and ternary spontaneous fission of 252Cf

The hot bimodal fission of ²⁵²Cf is reexamined with new high-statistics data. We constructed a γ-γ-γ coincidence cube for binary fission and LCP-gated γ-γ matrix for ternary fission. By identifying the secondary fission fragments from their γ-ray transitions, we measured the yields for various fission splits. The normal neutron yield distribution is found to be Gaussian for Xe-Ru. However, the binary fission split of Ba-Mo is found to exhibit a bimodal neutron distribution with the “hot mode” corresponding to ≈3.1% of the total yield. In α ternary fission, the first measurements of yields for specific fission splits are presented. The Te-α-Ru and Xe-α-Mo neutron yields fit well with a single mode, but the Ba-α-Zr split shows evidence for an enhanced hot mode with an intensity of ≈13.8% of the normal mode. The text was submitted by the authors in English.     

Calorimetric studies of the growth of Desulfovibrio desulfuricans in the presence of nitrocellulose

Calorimetric results indicate that nitrocellulose (NC)-induced changes in the metabolism of Desulfovibrio desulfuricans 1388 are caused by both chemical (nitrate) and physical (biofilm formation) factors. Nitrate added to lactate-based culture medium with nitrocellulose competed for the electron flux from lactate and suppressed the bacterial sulfidogenesis and growth. The presence of an insoluble compound (carbon backbone of the polymer) induced the creation of a biofilm-like structure with its own metabolism.     

Design and Fabrication of Composite Smart Structures with High Electric and Mechanical Performances for Future Mobile Communication

In this paper, we have developed a load-bearing outer skin for antennas, which is termed a composite smart structure (CSS). The CSS is a multilayer composite sandwich structure in which antenna layers are inserted. A direct-feed stacked patch antenna is considered. A design procedure including the structure design, material selection, and design of antenna elements in order to obtain high electric and mechanical performances is presented. An optimized honeycomb thickness is selected for efficient radiation and impedance characteristics. High gain conditions can be obtained by placing the outer facesheet in the resonance position, which is at about a half wavelength distance from the ground plane. The measured electrical performances show that the CSS has a great bandwidth (over 10%) and a higher gain than an antenna without a facesheet and has excellent mechanical performances, owing to the composite laminates and honeycomb cores. The CSS concept can be extended to give a useful guide for manufacturers of structural body panels and for antenna designers.     

Quantum Dynamics of Systems Connected by a Canonical Transformation

Quantum Hamiltonian systems corresponding to classical systems related by a general canonical transformation are considered. The differential equation to find the unitary operator, which corresponds to the canonical transformation and connects quantum states of the original and transformed systems, is obtained. The propagator associated with their wave functions is found by the unitary operator. Quantum systems related by a linear canonical point transformation are analyzed. The results are tested by finding the wave functions of the under-, critical-, and over-damped harmonic oscillator from the wave functions of the harmonic oscillator, free-particle system, and negative harmonic potential system, using the unitary operator to connect them, respectively.     

Formation of p-type ZnO film on InP substrate by phosphor doping

ZnO thin film was initially deposited on InP substrate by radio frequency (rf) magnetron sputtering and the diffusion process was performed using the closed ampoule technique where Zn₃P₂ was used as the dopant source. To verify the junction formation of ZnO thin films, the electrical properties were measured, and the effects of Zn₃P₂ diffusion on ZnO thin films were investigated. It is observed that the electrical property of the film is changed from n-type to p-type by dopant diffusion effect. Based on the results, it is confirmed that ZnO thin films can be a potential candidate for ultraviolet (UV) optical devices.     

Effects of hysteretic and aerodynamic damping on supersonic panel flutter of composite plates

The governing equation for the finite element analysis of the panel flutter of composite plates including structural damping is derived from Hamilton's principle. The first order shear deformable plate theory has been applied to structural modelling so as to obtain the finite element eigenvalue equation. The unsteady aerodynamic load in a supersonic flow is computed by using the linear piston theory. The critical dynamic pressures for composite plates have been calculated to investigate the effects of structural damping on flutter boundaries. The effects are dependent on fiber orientation because flutter mode can be weak or strong in the fiber orientation of composite plates. Structural damping plays an important role in flutter stability with low aerodynamic damping but would not affect the flutter boundary with high aerodynamic damping.     

Quantum wire heterostructure for optoelectronic applications

Quantum wire (QWR) heterostructures suitable for optoelectronic applications should meet a number of requirements, including defect free interfaces, large subband separation, long carrier lifetime, efficient carrier capture. The structural and opticl properties of GaAs/AlGaAs and InGaAs/GaAs quantum wire (QWR) heterostructures grown by organometallic chemical vapor deposition on nonplanr substrates, which satisfy many of these criteria, are described. These crescent-shaped QWRs are formed in situ during epitaxial growth resulting in virtually defect free interfaces. Effective wire widths as small as 10nm have been achieved, corresponding to electron subband separations greater than K_BT at room temperature. The enhanced density of states at the QWR subbands manifests itself in higher optical absorption and emission as visualized in photoluminescence (PL), PL excitation, amplified spontaneous emission and lasing spectra of these structures. Effective carrier capture into the wires via connected quantum well regions, which is important for enhancing the otherwise extremely small capture cross section of these wires, has also been observed. Room temperature operation of GaAs/AlGaAs and strained InGaAs/GaAs QWR lasers with threshold currents as low as 0.6mA has been demonstrated.