Supramolecular self-assembly of water-soluble cavitands: investigated by molecular dynamics simulation

In this study, we have examined supramolecular self-assembly process of a hydrophobic guest with a water-soluble host known by the trivial name octa acid (OA). Two octa acids form a capsular assembly only in presence of a nonpolar guest(s). Size and shape of the guest control the stoichiometry of the capsular complex. Here, all atom molecular dynamics simulation has been utilized to investigate complex formation mechanisms of a nonpolar guest (nonylbenzene) with two OA cavitands. Nonylbenzene was encapsulated into the nonpolar cavity of OA capsule owing to solvophobic interactions. Upon encapsulation it was twisted and bent due to lack of free space within the capsule. These unusual forms obtained from the simulation study were in accord with experimental findings. The post-complexation attributes of the guest were regulated by the available free space within the OA and favorable non-covalent interactions between the guest and the walls of the OA capsule. In the identical simulation condition two OA cavitands did not form a capsule without a guest, thus indicating requirement of a guest during the self-assembly of OA cavitands.     

Highly Ordered Mesoporous Cobalt-Copper Composite Oxides for Preferential CO Oxidation

Highly ordered mesoporous cobalt-copper composite oxides were prepared by the nanocasting method with various Co and Cu ratios. The catalysts obtained were characterized by X-ray diffraction, N₂ adsorption–desorption, H₂-temperature programmed reduction, CO-temperature programmed desorption and X-ray photoelectron spectroscopy. All of the catalysts had uniform mesopores and high surface areas. The distinct catalytic properties of these well-characterized mesoporous materials were demonstrated for preferential CO oxidation. It is found that the mesoporous cobalt-copper composite oxides, exhibited the higher catalytic activity for CO conversion and selectivity compared with the mesoporous Co₃O₄ and mesoporous CuO. Among these catalysts the mesoporous cobalt-copper catalyst with Co:Cu molar ratio of 70:30, shows the best catalytic activity and the broadest operating temperature “window” for the high CO conversion in the range of 125–200^oC. The higher catalytic activity was attributed to the higher CO adsorption and oxygen vacancies.     

A Comparison of NO Reduction Over Mn–Cu/ZSM5 and Mn–Cu/MWCNTs Catalysts Assisted by Plasma at Ambient Temperature

Manganese–copper bimetal oxide catalysts supported on ZSM5 and acid-treated multi-walled carbon nanotubes (MWCNTs) were produced by incipient wetness impregnation for selective catalytic reduction of NO with dielectric barrier discharge plasma. Plasma can activate molecules even at ambient temperature, generating active oxygen species such as O, O₃, and HO₂ radicals, which can oxidize NO to NO₂ effectively. The SCR activity of Mn–Cu/MWCNTs was studied and compared to that of the Mn–Cu/ZSM5. The obtained samples were characterized by XRD, SEM, TEM, ICP, H₂-TPR, Raman spectroscopy, and XPS. The results show that Mn–Cu/MWCNTs catalyst possesses NO removal activity superior to that of the Mn–Cu/ZSM5 catalyst. MWCNTs-based catalyst attains NO removal efficiency of 88% at 480 J/L, while the ZSM5-supported catalyst achieves NO removal efficiency of 82% at the same energy density. The oxygen content increased from 3.33 to 19.07% on the nanotube surface after introducing Mn and Cu, which almost remained unchanged on ZSM5. The oxygen-containing functionalities are important for NO_x adsorption and removal. Moreover, the characterization revealed that CuO is the main phase of copper oxide, but copper dispersion decreases on Mn–Cu/ZSM5 surface because of the formation of copper dimer species. The manganese is well-dispersed on the catalysts, MnO₂ and Mn₂O₃ contents of Mn–Cu/MWCNTs are larger than that of Mn–Cu/ZSM5, MnO₂ is the predominant phase of manganese oxide.     

Recent Progress of Synthesis and Application in Au@MOFs Hybrid Materials

The combination of gold nanoparticles and metal–organic frameworks is one of the new directions of current research. It has applications in many aspects, especially as a catalyst for a variety of reactions. Therefore, this paper describes recent progress of synthesis and application in Au@MOFs hybrid materials.     

Effect of cationic surfactant cetyltrimethylammonium bromide on the enzymatic hydrolysis of cellulose

Effect of cationic surfactants alkyltrimethylammonium bromide (C_nTAB) with varied alkyl chain lengths on the enzymatic hydrolysis of Avicel and the surface charge of cellulase was investigated. Enzymatic hydrolysis of Avicel increased linearly from 42.1 to 61.4 % with the increase of the concentration of cetyltrimethylammonium bromide (C₁₆TAB) logarithmically from 0.0001 to 0.01 mM, and reached a maximum value at the concentration of 0.01–0.03 mM. When the concentration was increased further, the cellulase solution became positively charged and the enzymatic hydrolysis of Avicel decreased rapidly. With the increasing alkyl chain length, C_nTAB provided more proton and neutralized the negative charge of cellulase more obviously. Therefore, the required concentration of C_nTAB could be less to enhance the enzymatic hydrolysis of Avicel. In addition, C₁₆TAB could enhance enzymatic hydrolysis efficiency of corncob at high solid content from 35.0 to 56.3 %; C₁₆TAB could reduce about 60 % of the cellulase loading in the enzymatic hydrolysis of corncob to obtain the same glucose yield. Effect of C₁₆TAB on the enzymatic hydrolysis of typical pretreated softwood and hardwood was also investigated. This study laid the foundation for using C_nTAB to recover cellulase, and provided the design direction for cellulase with higher activity and better stability by adjusting its hydrophilicity and chargeability.     

Comparison of hydrothermal,hydrotropic and organosolv pretreatment for improving the enzymatic digestibility of bamboo

Pretreatment is the crucial step to disrupt the recalcitrant structure of lignocellulosic biomass for improving the enzymatic hydrolysis efficiency. Typically, hydrothermal, organosolv and hydrotropic pretreatments are environmentally benign and effective methods. In this work, effects of hydrothermal, organosolv and hydrotropic pretreatments on improving enzymatic hydrolysis of bamboo were comprehensively compared. Hydrotropic pretreatment was more effective in removal lignin and xylose from bamboo fiber cell wall. However, the surface coverage by lignin and extractives were dramatically displaced during organosolv pretreatment as investigation by X-ray photoelectron spectroscopy. After pretreatments, the crystallinity of cellulose in pretreated substrates has a significant reduction, and pores were exposed on fiber surface. The residual content of acetyl and phenolic groups in hydrotropic pretreated substrates is lower than organosolv pretreated substrates. In order to deeply assess the delignification of pretreatments, the isolated lignins obtaining from pretreatments process were characterized by Fourier transform infrared spectroscopy also. It was revealed that hydrotropic lignin contained more phenolic hydroxyl group and syringyl units than organosolv lignin. Compared to hydrothermal and organosolv pretreatment, cellulase adsorption capacity of pretreated substrates was notably improved by hydrotropic pretreatment, which indicating the better enzyme accessibility of cellulose. Eventually, the maximum glucose yield was obtained from hydrotropic pretreated substrates.     

Effective transformation of cellulose to 5-hydroxymethylfurfural catalyzed by fluorine anion-containing ionic liquid modified biochar sulfonic acids in water

This article first discloses that the fluorine anion-containing ionic liquids-functionalized biochar sulfonic acids (BCSA-IL-F_1–3s), which were simply synthesized by an ionic exchange of 1-trimethoxysilylpropyl-3-methylimidazolium chloride (IL-Cl) grafted on the BCSA with CF₃SO₃H (HF₁), HBF₄ (HF₂), HPF₆ (HF₃), respectively, can efficiently catalyze cellulose hydrolysis into reducing sugars (RSs) and 5-hydroxymethyl furfural (HMF) in water under microwave irradiation. This process provides a very high catalysis efficiency (turnover numbers, 4.03–4.89) at mild temperature (80 °C) for 3 h, but also possesses an excellent repeatability. More outstandingly, they can achieve much higher HMF yields (12.70–27.94%) compared to the IL-Cl-functionalized BCSA catalyst (HMF yields are lower than 0.1%) under the same reaction conditions. This is likely because the introduction of IL-F_1–3s groups can significantly improve the accessibility, acidity and thermal stability of BCSA’s SO₃H sites, as supported by evidence from a solid ³¹P NMR spectrum and thermogravimetric analysis. It is proposed that the good selectivity for HMF perhaps originates from a co-catalysis action of the IL-F_1–3s and SO₃H groups on BCSA-IL-F_1–3s in the further conversion of RSs to HMF.     

The effect of side-chain length of cellulose fatty acid esters on their thermal,barrier and mechanical properties

Currently, long-chain cellulose esters are not produced commercially because of high price, and since their preparation typically requires a large quantity of chemicals. To reduce the chemical consumption, cellulose reactivity needs to be increased without losing its quality. One way to increase the reactivity of cellulose is to decrease its molar mass in a controlled manner. In this study, we have synthesized cellulose esters with different side-chain length (C6–C18) in a homogeneous system using ozone molar mass-controlled cellulose. The target was to keep the degree of substitution as low as possible while still ensuring the suitability of cellulose esters for solvent casting. Thermal, barrier and mechanical properties were studied depending on cellulose fatty acid ester side-chain length. All our molar mass-controlled cellulose esters form optically transparent, flexible and heat-sealable films with good water barrier properties and are processable without the addition of an external plasticizer. Furthermore, the films have mechanical properties comparable to some generally used plastics. These good properties suggest that our molar mass-controlled cellulose esters could be potential candidates for various applications such as films and composites.     

Heuristic analysis of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> bark depolymerization via acid-liquefaction

A clear, direct and rapid analysis of the preliminary results concerning the acid liquefaction of Eucalyptus globulus’ bark is herein presented. The results led to a methodology for the selective liquefaction of hemicellulose and amorphous cellulose. Liquefaction was conducted at various temperatures, as well as different reaction times. The process results are heuristically explained in view of the experiments of ATR-FTIR, hydroxyl number, and acid value. The procedure method allows reusing the wastes arising from the paper industry. Valuable products and chemical building blocks from lignocellulosic biomass, mostly based on cellulose can be thus accessed.     

Stability enhancement of nanofibrillated cellulose in electrolytes through grafting of 2-acrylamido-2-methylpropane sulfonic acid

This study aimed to improve the stability of nanofibrillated cellulose (NFC) in an electrolyte containing system, which was achieved by the grafting of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) via the ceric ammonium nitrate-induced polymerization process. The results indicated that upon grafting the salt resistance and thermal stability of NFC were significantly improved. Moreover, the stability of the modified NFC increased with the AMPS loading. Compared to the control (the original NFC), the poly-AMPS/NFC (357.5 mg/g AMPS) exhibited much improved stability in a 400 mmol/L NaCl solution, and its viscosity was 350 mPa s. The thermogravimetric analysis results showed that the initial decomposition temperature of the modified NFC increased from 265 to 330 °C. Transmission electron microscopy (TEM) observations showed that the main morphologic features of NFC were not altered, suggesting that the grafting reaction occurred on the fiber surface. The modified NFC can have promising industrial applications, such as oil recovery.