Development of high-speed video cameras for Dynamic PIV

The most promising next generation Image Velocimtry (IV) is the high-speed Dynamic PIV. It requires the development of innovative high-speed video camera sensors. We started by specifying the required performance of these new sensors, for measurements in air and water flows. These criteria founded on the most recent developments in PIV algorithms and incorporate results from a large questionnaire survey of users of high-speed video cameras in Japan. The results suggest that the followings are required: (1) frame rate of 1,000,000 fps, (2) pixel count of 1,000,000 pixels, (3) frame storage capacity of 100–200 frames for tracing a single event and 10,000 frames for turbulent measurements, (4) gray levels of 4–8 bits for PTV; 12 bits for observation. Finally, we reviewed the state of the art of high-speed video-image sensors. Currently the standard parallel-readout sensors can operate at 1 Kfps with a pixel count of approximately 1 Kpixels. The In-situ Storage Image Sensor (ISIS) developed by the authors has recently achieved frame rates of 1 Mfps.     

A model of JIT make-to-stock inventory with stochastic demand

We consider a firm that manages its internal manufacturing operations according to a just-in-time (JIT) system but maintains an inventory of finished goods as a buffer against random demands from external customers. We formulate a model in which finished goods are replenished by a small fixed quantity each time period. In the interest of schedule stability, the size of the replenishment quantity must remain fixed for a predetermined interval of time periods. We analyse the single-interval problem in depth, showing how to compute a cost-minimising value of the replenishment quantity for a given interval length, and characterising the optimal cost, inventory levels and service as functions of the interval length and initial inventory. The model displays significant cost and service penalties for schedule stability. A dynamic version of the problem is also formulated, and shown to be convex in nature with relatively easily computed optima.     

三种胺羧配合物的113Cd NMR研究

该文对Cd-HEDTA(N-(2-羟基乙基)乙二胺-N',N',N'-三乙酸),Cd-PDTA(1,2丙二胺四乙酸)和Cd-DTPA(二乙三胺五乙酸)的¹¹³Cd NMR谱和自旋晶格弛豫时间T₁,及NOE因子进行了研究.结果表明,Cd-HEDTA和Cd-PDTA结构与Cd-EDTA类似,Cd-PDTA双线归因于其可能的两种异构体.Cd-DTPA大的化学位移表明其具有七配位的五角双锥结构.在这种结构中DTPA可用三个氮原子参加配位.对¹¹³Cd自旋晶格弛豫时间分析表明,Cd-DTPA配合物中质子偶极作用机理的贡献较大,这归因于Cd DTPA有更多的乙酸根亚甲基质子参与偶极作用.     

An Overview of Scheduling Problems Arising in Satellite Communications

Satellite communications, like batches of work in a job shop, need to be scheduled in order to use their resources as efficiently as possible. The most common satellite communications system in use today is known as Time Division Multiple Access (TDMA), in which data from earth stations is buffered before being transmitted to the appropriate receiver on a satellite. Cycles of transmission are fixed for all stations. Since the same satellite will be used for routeing data in several different ways, a schedule must be devised to use the receivers, repeaters and transmitters on board to minimize the time needed for completion of a batch of work. This paper is a survey of current scheduling algorithms used for optimizing satellite communications resources. Apart from telecommunications, the methods presented here could be applied to more general scheduling problems with renewable resources but without precedence constraints.     

Calorimeter energy calibration using the energy conservation law

A new calorimeter energy calibration method was developed for the proposed ILC detectors. The method uses the center-of-mass energy of the accelerator as the reference. It has been shown that using the energy conservation law it is possible to make ECAL and HCAL cross calibration to reach a good energy resolution for the simple calorimeter energy sum.      

A possibility of parallel and anti-parallel diffraction measurements on neutron diffractometer employing bent perfect crystal monochromator at the monochromatic focusing condition

In a conventional diffractometer having single monochromator, only one position, parallel position, is used for the diffraction experiment (i.e. detection) because the resolution property of the other one, anti-parallel position, is very poor. However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the Δd/d measured on three diffraction geometries (symmetric, asymmetric compression and asymmetric expansion), we can conclude that the simultaneous diffraction measurement in both parallel and anti-parallel positions can be achieved.     

Browder-Petryshyn 型的严格伪压缩映射的粘滞迭代逼近方法

主要研究Browder-Petryshyn型的严格伪压缩映射的粘滞迭代逼近过程,证明了Browder-Petryshyn型的严格伪压缩映射的不动点集F(T)是闭凸集．在q-一致光滑且一致凸的Banach空间中,对于严格伪压缩映射T,利用徐洪坤在2004年引进的粘滞迭代得到的序列弱收敛于T的某个不动点．同时证明了Hilbert空间中Browder-Petryshyn型的严格伪压缩映射的相应迭代序列强收敛到T的某个不动点,其结果推广与改进了徐洪坤2004年的相应结果．     

Electricity price forecasting through transfer function models

Forecasting electricity prices in presentday competitive electricity markets is a must for both producers and consumers because both need price estimates to develop their respective market bidding strategies. This paper proposes a transfer function model to predict electricity prices based on both past electricity prices and demands, and discuss the rationale to build it. The importance of electricity demand information is assessed. Appropriate metrics to appraise prediction quality are identified and used. Realistic and extensive simulations based on data from the PJM Interconnection for year 2003 are conducted. The proposed model is compared with naïve and other techniques.