������΢��ⷽ���Բ�배��㺸����������о�

Based on the structure design and characteristics of the sealing welding of tritium-breeding blanket cap runner, the ultrasonic microscopic detection technology is studied. The testing parameters and the applicability of the method are determined. The JSR DPR500 ultrasonic microscopic detection system is selected to study the testing parameters. The characteristics of the probe parameters and the focus of the sound beam in the ultrasonic microscopy detection are analyzed. Different parameters and water layer thicknesses are used to improve the detection sensitivity. The problem that the small defects in the sealing welding of cap runner are difficult to detect is solved.     

CaPtAs: A new noncentrosymmetric superconductor

We report the discovery of a new noncentrosymmetric superconductor CaPtAs.It crystallizes in a tetragonal structure(space group I41md,No.109),featuring three dimensional honeycomb networks of Pt-As and a much elongated c-axis(a=b=4.18?,and c=43.70?).The superconductivity of CaPtAs with Tc=1.47 K was characterized by means of electrical resistivity,specific heat,and ac magnetic susceptibility.The electronic specific heat Ce(T)/T shows evidence for a deviation from the behavior of a conventional BCS superconductor,and can be reasonably fitted by a p-wave model.The upper critical fieldμ0Hc2 of CaPtAs exhibits a moderate anisotropy,with an in-plane value of around 204 mT and an out-of-plane value of 148 mT.Density functional theory calculations indicate that the Pt-5 d and As-4 p orbitals mainly contribute to the density of states near the Fermi level,showing that the Pt-As honeycomb networks may significantly influence the superconducting properties.     

On-chip multiphoton Greenberger–Horne–Zeilinger state based on integrated frequency combs

One of the most important multipartite entangled states, Greenberger–Horne–Zeilinger state (GHZ), serves as a fundamental resource for quantum foundation test, quantum communication and quantum computation. To increase the number of entangled particles, significant experimental efforts should been invested due to the complexity of optical setup and the difficulty in maintaining the coherence condition for high-fidelity GHZ state. Here, we propose an ultra-integrated scalable on-chip GHZ state generation scheme based on frequency combs. By designing several microrings pumped by different lasers, multiple partially overlapped quantum frequency combs are generated to supply as the basis for on-chip polarization-encoded GHZ state with each qubit occupying a certain spectral mode. Both even and odd numbers of GHZ states can be engineered with constant small number of integrated components and easily scaled up on the same chip by only adjusting one of the pump wavelengths. In addition, we give the on-chip design of projection measurement for characterizing GHZ states and show the reconfigurability of the state. Our proposal is rather simple and feasible within the existing fabrication technologies and we believe it will boost the development of multiphoton technologies.     

Multi-Objective Optimization of Braun-Type Exothermic Reactor for Ammonia Synthesis

The exothermic reactor for ammonia synthesis is a primary device determining the performance of the energy storage system. The Braun-type ammonia synthesis reactor is used as the exothermic reactor to improve the heat release rate. Due to the entirely different usage scenarios and design objectives, its parameters need to be redesigned and optimized. Based on finite-time thermodynamics, a one-dimensional model is established to analyze the effects of inlet gas molar flow rate, hydrogen–nitrogen ratio, reactor length and inlet temperature on the total entropy generation rate and the total exothermic rate of the reactor. It’s found that the total exothermic rate mainly depends on the inlet molar flow rate. Furthermore, considering the minimum total entropy generation rate and maximum total exothermic rate, the NSGA-II algorithm is applied to optimize seven reactor parameters including the inlet molar flow rate, lengths and temperatures of the three reactors. Lastly, the optimized reactor is obtained from the Pareto front using three fuzzy decision methods and deviation index. Compared with the reference reactor, the total exothermic rate of the optimized reactor is improved by 12.6% while the total entropy generation rate is reduced by 3.4%. The results in this paper can provide some guidance for the optimal design and application of exothermic reactors in practical engineering.     

One‐Pot Synthesis of 2,5‐Furandicarboxylic Acid from 2‐Furoic Acid by a Pd‐catalyzed Bromination–Hydroxycarbonylation Tandem Reaction in Acetate Buffer

The one‐pot synthesis of 2,5‐furandicarboxylic acid from 2‐furoic acid with a yield of 57 % was achieved for the first time using a Pd‐catalyzed bromination‐hydroxycarbonylation tandem reaction in HOAc‐NaOAc buffer. This synthetic protocol shows major improvements compared to previously reported methods, such as using biomass‐based 2‐furoic acid as low‐cost raw material, one‐pot synthesis without isolation of intermediate products, and no need for an acidification procedure. Experiments indicate that the involved Xantphos‐modified Pd‐catalyst and the buffer solution play significant promoting roles for each individual reaction whereas Br₂ (as the brominating reagent) had a negative effect on the second hydroxycarbonylation step, while CO was deleterious for the first bromination step. Hence, in this practical one‐pot synthesis, Br₂ should be consumed in the first bromination step as fully as possible, and CO is introduced after the first bromination step has been completed.     

硬脂酸镉和山嵛酸镉混合LB膜的微结构

X-ray diffraction (XRD) was used to investigate the microstructure and phase separation of mixed multilayers of cadmium stearate (SA) and behenate (BA) deposited onto hydrophilic glass by the Langmuir-Blodgett technique. No unitary fatty acid diffraction peaks in the XRD spectra of the mixed LB films, which reveals that domains in these samples are small and uniform. The interplanar spacing of the mixed LB films changes with the ratio of BA to SA in a step-shaped curve, which suggests that with the changing of the ratio between BA and SA, only three kinds of ordered structure form in the mixed system, and each microstructure, in particular, the short chains against long chains meshed microstructure can be maintained in a certain ratio range . In addition, for the meshed microstructure, the alkyl chains of both SA and BA stand straight or may have exactly the same small tilted angle from the substrate normal, as is indicated by the symmetric and asymmetric stretching vibration of methylene (CH2) peaks which are at 2847.80 and 2914.37 cm-1respectively in the Fourier transform infrared (FT-IR) transmission spectra. The mixed system always goes through a longitudinal regularity decreasing process when BA/SA is out of the intermediate ratio range (BA/SA: 1/5-1/1), which is illustrated by the relative XRD intensity changing with the ratio of BA/ SA in a \W" shape. These results for the mixed LB films of BA/SA provide meaningful data for choosing the mixture ratio when fabricating composite films with special structure.     

DNA加合物检测

DNA加合物是一类极其重要的、具有多种标志作用的生物标志物,可应用于环境致癌物的暴露监测、基因毒性测定、个体敏感性和环境致癌物与基因的相互作用研究、癌症风险评价、环境致癌因素筛查以及癌症预防研究等.可靠、灵敏、准确的分析检测技术是DNA加合物作为生物标志物得到广泛应用的关键.当前DNA加合物分析、检测的方法主要包括:32P后标记法、免疫分析法、免疫毛细管电泳激光诱导荧光法、液相色谱串联质谱法、微分离.质谱联用法等.本文对这些分析技术和方法及其在DNA加合物检测方面的应用做一简要综述.     

An ionothermal synthetic approach to porous polyoxometalate-based metal-organic frameworks

Pretty porous POMs: Ionothermal synthesis was applied to prepare porous POM-based open frameworks. The structural integrity remains unchanged until 300?°C; most importantly, the bulky tetrabutylammonium cations within their nanosized channels can be replaced by transition-metal ions through a cation-exchange process, and subsequent gas adsorption measurements confirm their permanent porosity.     

Highly oxidized graphene with enhanced fluorescence and its direct fluorescence visualization

We prepared hyper-oxidized graphene (HOG) as a form of graphene derivative by additional oxidation of graphene oxide (GO) sheets. HOG, which formed more functional groups and isolated conjugated clusters on the sheets, accordingly showed high solubility in water and alcohols, high transmittance and film transparence, longer fluorescence decay constant time, and enhanced fluorescence in states of solution and solid. By contrast, GO has much weaker fluorescence in solution and its fluorescence is totally quenched in solid. The influences of concentration, metallic ions, and pH on HOG fluorescence in aqueous solution were also investigated in detail. Due to HOG’s strong fluorescence, direct visualization was realized on substrates and in solution. In addition, direct 3D fluorescence visualizations of HOG phase in polymer composites were achieved. These results show the great potential of HOG in a broad range of applications, from biological labeling, probes, and drug carriers to high-performance composites and nanomanipulation.     

Surface properties and doxorubicin delivery in mixed systems comprising a natural rosin-based ester tertiary amine and an anionic surfactant

A rosin-based ester tertiary amine salt (RETAS) cationic surfactant was obtained using natural rosin as raw material. GC-MS of RETAS was detailed analyzed. The pH-responsive mechanism of rosin-based ester tertiary amine (RETA) and RETAS was confirmed by applying theoretical calculations about electrostatic potential maps of RETA and RETAS cation using Gaussian software. Mixed system surfactants were obtained by blending RETAS cationic surfactant with sodium dodecyl benzene sulfonate (SDBS) anionic surfactant. The binary mixed surfactant systems of RETAS and SDBS had obvious synergistic effect. The γ_cmc and CMC were 39.40?mN/m and 0.56?mmol/L at the optimum molar fraction of RETAS (α)?=?0.6, respectively. The stability time of emulsion with the optimum mixed system as emulsifier increased to 309?s at α?=?0.6. The emulsifying capacity of RETAS was much better than that of RETA. RETAS had pH-responsive targeted release and the optimum mixed system showed a relatively sustained drug release by using doxorubicin (DOX) as a model drug. These results indicate that RETAS surfactant and mixed system surfactant are both promising for applications in drug delivery and emulsification.