Rapid Detection of Five Estrogens Added Illegally to Dietary Supplements by Combining TLC with Raman Imaging Microscope

Estrogens added illegally to dietary supplements are hazardous to human health. Traditional detection and analysis methods have many limitations, and we have developed an assay that combines thin-layer chromatography with Raman imaging microscopy (TLC-RIM). The five estrogens (estrone, estradiol, estriol, ethinyl estradiol, and diethylstilbestrol) were initially separated by TLC, then detected by area scanning Raman imaging with a 532 nm laser under a microscope. Raman spectra were obtained for each estrogen, which were used for detecting estrogen illegally added to botanical dietary supplements. The LOD of each estrogen was 0.4, 1.0, 0.8, 0.2, and 0.2 mg/mL, respectively. The matrix in the real sample did not interfere with the detection of estrogens. The method was fast, sensitive, stable, specific, and reliable.     

含缺陷的二维CuI光电性质的第一性原理计算

基于密度泛函理论计算了本征缺陷时二维CuI的光电特性,分析了能带结构以及复介电函数.本征2D CuI的带隙值为1.56 eV,为直接带隙半导体;I和Cu缺陷的引入使2D CuI的带隙值小,Cu缺陷的引入并未改变2D CuI的带隙方式,而I缺陷的引入使2D CuI变为间接带隙半导体.光学性质计算结果表明本征2D CuI的静介电函数为2.47, I缺陷的引入对2D CuI的静介电函数影响较小,但是在Cu缺陷时2D CuI的静介电函数急剧增大.     

Using PVP/SDS Complex as a Probe to Study the Inclusion Complex of β-cyclodextrin with SDS in Aqueous Solution

利用PVP/SDS聚集体作为探针研究了水溶液中β-环糊精与SDS之间的包合作用,结果表明在含有PVP/SDS聚集体溶液的相对粘度对β-环糊精浓度作图中存在着特征浓度c_s,当β-环糊精的浓度低于c_s时,随着β-环糊精浓度的增加,溶液的相对粘度迅速下降;与此相反,当β-环糊精浓度高于c_s时,随着β-环糊精浓度的增加,溶液的相对粘度逐渐增加. 含有PVP/SDS聚集体溶液相对粘度随着β-环糊精浓度增加而迅速下降是由于β-环糊精包合了客体分子SDS,该包合作用将导致SDS分子从高分子链中脱落. β-环糊精和SDS包合比例可以由c_s计算得出,实验结果是1比1. 进一步的实验结果表明,c_s与PVP/SDS聚集体中SDS的含量有关、和PVP的含量无关,但是β-环糊精和SDS的包合比与PVP/SDS聚集体中SDS和PVP的含量皆无关.     

Observation of Nano-Dots on HOPG Surface Induced by Highly Charged Arq+ Impact

Highly charged ions （HCIs） have huge potential energy due to their high charge state. When a HCI reaches a solid surface, its potential energy is released immediately on the surface to cause a nano-scale defect. Thus, HCIs are expected to be useful for solid-surface modifications on the nano-scale. We investigate the defects on a highly oriented pyrolytic graphite （HOPG） surface induced by slow highly charged Ar^q＋ ions with impact energy of 20-2000qeV with scanning probe microscopy （SPM）. In order to clarify the role of kinetic and potential energies in surface modification, the nano-defects are characterized in lateral size and height corresponding to the kinetic energy and charge state of the HCIs. Both the potential energy and kinetic energy of the ions may influence the size of nano-defect. Since potential energy increases dramatically with increasing charge state, the potential energy effect is expected to be much larger than the kinetic energy effect in the case of extremely high charge states. This implies that pure surface modification on the nano-scale could be carried out by slow highly charged ions. The mean size of nano-defect region could also be controlled by selecting the charge state and kinetic energy of HCI.     

熔石英后表面坑点型划痕对光场调制的近场模拟

建立了坑点型划痕的旋转抛物面模型, 用三维时域有限差分方法研究了熔石英后表面坑点型划痕随深度、 宽度、 间距以及酸蚀量变化对波长λ =355 nm入射激光的调制.研究表明, 这类划痕调制最强区位于相邻两坑点的连接区, 且越靠近表面调制越强.当其宽深比为2.0---3.5、 坑点间距约为坑点宽度的1/2时, 可获得最大光场调制, 最大光强增强因子(LIEF)为11.53; 当坑点间距大于坑点宽度时, 其调制大为减弱, 相当于单坑的场调制.对宽为60δ (δ =λ/12), 深和间距均为30δ的坑点型划痕进行刻蚀模拟, 刻蚀过程中最大LIEF为11.0, 当间距小于300 nm时, 相邻坑点由于衍射形成场贯通.     

Two localized CO2 laser treatment methods for mitigation of UV damage growth in fused silica

Two methods：high-power,short-time,single-shot irradiation（Method A） and low-power,long-time,multi-shot irradiation（Method B） are investigated to mitigate the UV damage growth in fused silica by using a 10.6-μm CO2 laser.To verify the mitigation effect of the two methods,the laser induced damage thresholds（LIDTs） of the mitigated sites are tested with a 355-nm,6.4-ns Nd：YAG laser,and the light modulation of the mitigation sites are tested with a 351-nm continuous Nd：YLF laser.The mitigated damaged sites treated with the two methods have almost the same LIDTs,which can recover to the level of pristine material.Compared with Method A,Method B produces mitigated sites with low crater depth and weak light modulation.In addition,there is no raised rim or re-deposited debris formed around the crater edge for Method B.Theoretical calculation is utilized to evaluate the central temperature of the CO2 laser beam irradiated zone and the radius of the crater.It is indicated that the calculated results are consistent with the experimental results.     

IPDA激光雷达数据反演快速精确优化算法

研究了积分路径差分吸收(IPDA)激光雷达中采用洛伦兹线型代替伏格特线型对机载平台探测CO₂柱浓度精度的影响。建立仿真模型,讨论两种线型在数据反演中对温度和气压的敏感性,以及探测相对误差变化随飞行高度的变化。结果表明：伏格特和洛伦兹线型得到的吸收截面,温度和气压敏感性,相对随机误差分别为0.860%,-0.703%和0.224%,基本没有差别,但是洛伦兹线型可以有效地提高光谱参数计算效率。机载IPDA激光雷达采用洛伦兹线型可以快速高精度反演飞行路径上CO₂柱浓度,降低了对系统计算能力的要求,有助于实现在飞期间数据实时反演和分析,以及实施针对突发事件的飞行规划,同时也有助于进一步实现机载激光雷达系统的小型化和集成化。     

空间太阳电池槽式聚光热电联供系统特性分析

建立了空间太阳电池的热电联供系统在槽式聚光条件下的热电性能模型, 并与实验进行了对比.理论计算与实验结果吻合较好, 最大误差在5.1%以内, 证明了该数学模型的正确性.通过此数学模型, 从聚光镜面的光学效率与焦线宽度、导热胶的导热系数、金属平板光照面的吸收率等内部特性参数及风速、太阳直辐射等外部特性参数出发, 对所设计制造的空间太阳电池槽式聚光热电联供系统进行分析.较为全面而系统地分析了这些参数的改变对其系统的热电效率、总效率及火用效率等性能指标的影响, 其中聚光镜面的光学效率影响最大, 光学效率从0.5增加至0.95, 系统的总效率和火用效率分别增加0.9倍和0.5倍, 其余参数对性能也有较强影响.研究结果为新一轮系统装置的制作提供了优化设计基础.     

铬、钕双掺钆镓石榴石(Cr4+,Nd3+):Gd3 Ga5 O12激光晶体光学性能的研究

用提拉法生长了掺铬、钕的钆镓石榴石(Cr^4 ,Nd^3 ：GGG)自调Q激光品体。报道了室温下的吸收光谱和荧光光谱特性。分析了Cr离子浓度对光谱性质的影响。比较了Cr^4 ：GGG,Nd^3 ：GGG和(Cr^4 ,Nd^3 )：GGG晶体吸收光谱的关系。测量了(Cr^4 ,Nd^3 )：GGG晶体和Nd^3 ：GGG晶体的荧光寿命,它们分别是33μs和250μs。实验表明,(Cr^4 ,Nd^3 )：GGG晶体是一种非常有潜力的自调Q激光晶体,可以实现大功率激光器的小型化和全固态化。