学生自主研学和创新能力的培养——研究性课题式物理实验教学实践

着重介绍为了培养学生的自主研学和创新能力,近年来在研究性课题式物理实验教学实践中所采取的一些有效措施。     

Some Consequences of the Nature of the Distance Function on the Cut Locus in a Riemannian Manifold

We render the cut locus more accessible to analysis by showingthat each non-conjugate cut point has a neighbourhood on whichthe distance function is the minimum of finitely many smooth‘radial functions’. This enables us to generaliseto an arbitrary complete manifold a number of recent results,mainly from stochastic analysis, which were either limited ornot valid on the cut locus because of the lack of differentiabilitythere of the distance function.     

氧化锌脱硫中氢的气氛效应及动力学表征

用热重法研究了粉末氧化锌脱除Ｈ２Ｓ的氢气氛效应，研究结果表明，在２００－３２０℃的温度范围内，氢的存在影响着脱硫进程，并在氢含量在３０％处出现正负效应的逆转。氢气氛下氧化锌脱硫的动力学行为可用改良收缩核模型来表征，给出了不同控制区的动力学参数估值。     

Effect of chain compositions on interpolymer specific interaction in solutions

An interpolymer specific interaction of polymers with complementary proton donor units and proton acceptor units was studied with viscometry. In this study, poly(styrene-co-octyl acrylate-co-acrylic acid) as proton donating polymer (PDP) and poly(styrene-co-octyl acrylate-co-4-vinylpyridine) as proton accepting polymer (PAP) with different macromolecular chain compositions were prepared by emulsion copolymerization. Complexed solutions formed by PDP and PAP were studied with a novel interaction criterion k_a based on viscosity enhance factor. The effects of macromolecular chain compositions on the ability to interpolymer interaction and complex stoichiometry were discussed. The results showed that long chain alkyl acrylate units play an important role in the interpolymer specific interaction.     

A Renewable Potentiometric Immunosensor Based on Fe3O4 Nanoparticles Immobilized Anti‐IgG

A renewable potentiometric immunosensor for detection of immunoglobulin G (IgG) has been developed by magnetic force attraction of Fe₃O₄ nanoparticles immobilized goat‐anti‐human IgG antibody. For preparing sensitive film of the sensor, cysteine was bonded on the nano‐Fe₃O₄ particles surface. The cysteine functionalized magnetic nanoparticles was attracted on a solid paraffin carbon paste electrode surface to covalently immobilize of anti‐immunoglobulin G (anti‐IgG) by employing a conventional glutaraldehyde‐crosslinking method. The immunosensor showed a specific response to human immunoglobulin G in the range of 0.1–1.2 ng/mL with a detection limit of 0.023 ng/mL. The immunosensor based on the magnetic nanoparticles was made easily by this method. It can be used expediently, renewed easily and low‐cost relatively. The renewable potentiometric immunosensor with better stability and higher sensitivity can be employed extensively in clinical diagnosis, monitoring of disease and environmental studies and etc.     

Synthesis and structure of trifluoromethylated arylhydrazones formed from coupling of 4-(dimethylamino)-1,1,1-trifluorobut-3-en-2-one with diazonium salts

A series of trifluoromethyl-containing arylhydrazones were prepared via a direct azo-coupling of (E)-4-(dimethylamino)-1,1,1-trifluorobut-3-en-2-one (1) with different aromatic diazonium salts. Furthermore, we also discussed the non-covalent interactions existing in the crystal structure of compound (E)-4,4,4-trifluoro-2-(2-(4-iodophenyl)hydrazono)-3-oxobutanal (3c) by the X-ray diffraction analysis.     

Study on the 1,3-dipolar cycloaddition reaction of 4-ethoxy-1,1,1-trifluoro-3-buten-2-one with nitrile oxides

1,3-Dipolar cycloaddition (1,3-DC) reaction of 4-ethoxy-1,1,1-trifluoro-3-buten-2-one 1 with nitrile oxides was studied. It was found that besides its CC participating in the formation of isoxazole rings, trifluoromethyl activated CO also underwent 1,3-DC reaction with nitrile oxides to afford 1,4,2-dioxazole rings. Single crystal diffraction analysis also evidenced the diheterocyclic configuration.     

Facilely constructed two-sided microstructure interfaces between electrodes and cellulose paper active layer: eco-friendly,low-cost and high-performance piezoresistive sensor

Cellulose - The microstructure plays an important role in improving the sensing performance of pressure sensor. However, the design of microstructural active layer of pressure sensor usually...     

A Facile Strategy for Low Young's Modulus PDMS Microbeads Enhanced Flexible Capacitive Pressure Sensors

Flexible pressure sensors are widely demanded in human care systems. A simple and effective strategy for sensor fabrication can markedly promote its application. Herein, a facile strategy is employed to prepare a flexible capacitive pressure sensor with a polydimethylsiloxane microbeads-modified dielectric layer. Owing to the microbeads structure, the proposed sensor achieves a sensitivity of 0.048 kPa⁻¹ in the range of 0–10 kPa with a wide dynamic range (up to 100 kPa). The sensitivity is nine times higher than that of the planar structure. Moreover, the microbeads structured sensor obtains a low limit of detection (0.2 kPa), fast response time (120 ms), and good stability (variation lower than 3.30% after 1000 loading/unloading cycles at 20 kPa). The finite-elemental analysis reveals that the microbeads structure is critical to enhance the performance of sensors. Finally, the pressure sensor is successfully applied to detect touch signal, joints movement, and breathing, exhibiting its promising prospects as smart wearable devices. Furthermore, the strategy may provide a new idea for the microstructural design of capacitive pressure sensors.     

利用石墨烯-炭黑组成的二元碳载体增强甲酸在钯催化剂上电化学氧化的活性

本文采用"一锅法"将氧化石墨烯(GO)、炭黑(C)和钯离子用NaBH4共还原,制备了石墨烯-炭黑二元载体(Gr-C)负载的钯催化剂(20%Pd/Gr-C),用于催化甲酸的电氧化反应.电化学测试结果表明,前驱体GO和C的质量比为3:7的Pd/Gr0.3C0.7催化剂催化活性最好,它的峰电流密度(102.14 mA mgPd-1)约为Pd/C催化剂(34.40 mA mgPd-1)的3倍,为钯/石墨烯催化剂(Pd/Gr,38.50 mA mgPd-1)的2.6倍.甲酸在Pd/Gr0.3C0.7催化剂电极直接氧化时的峰电位比Pd/C催化剂的峰电位负移约120 mV,比Pd/Gr催化剂的峰电位负移约70 mV.采用透射电子显微镜(TEM)、扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、拉曼光谱、电感耦合等离子发射光谱(ICP-AES)等手段对催化剂进行了表征.从SEM图像可以观察到,球形的炭黑团簇聚集在具有褶皱的石墨烯面上,形成了炭黑团簇/石墨烯三维立体结构,有效地抑制了相邻石墨烯层在范德华力作用下的吸引聚集和堆叠造成的石墨烯表面积减小,减小了单层石墨烯叠合成为多层石墨所造成的导电性损失,避免了相邻石墨烯片叠合形成封闭空间,有助于反应物和产物分子的运动.载体的三维结构使反应物分子更容易到达钯纳米粒子,有利于催化性能的提高.XPS结果也证实了二元Gr-C载体对Pd催化的促进作用.Pd/Gr0.3C0.7催化剂的Pd 3d5/2峰发生了右移,表明Pd 3d电子结合能正移,Pd 3d电子云密度降低.具有较低的3d电子云密度的Pd不易与甲酸氧化过程中吸附的中间体(COOH)ads结合,钯催化剂上(COOH)ads表面覆盖率降低,从而使甲酸更容易直接脱氢氧化生成CO2,有利于甲酸通过直接途径进行电化学氧化.与Pd/C,Pd/Gr相比,Pd/Gr0.3C0.7催化剂对甲酸电氧化有最好的催化活性.Pd/Gr0.3C0.7催化剂优异的催化活性可归因于其内在的三维纳米结构:炭黑团簇有效地抑制了石墨烯纳米片的聚集,保持了其大的比表面积和高导电性,促进了反应物和产物分子的运动.此外,Pd纳米粒子与二元载体之间的强相互作用降低了Pd的3d电子云密度,使甲酸氧化主要经直接途径进行.本文证实了钯金属和石墨烯-炭黑二元载体之间的强相互作用,提供了简单和高性价比的方法以提高钯基催化剂的活性,有利于工业化的应用.