电热原子吸收法测定人发中硒时不同改进剂的研究

对于生物体中硒的测定,国内外已有大量报道,所用方法也相当广泛。本文利用石墨炉原子吸收对人发中硒的测定进行了研究;对使用较多的两种硒的基体改进剂:铜与镍的作用与效果进行了研究,发现铜较镍在某些方面更为优越。当选用100 μg/mL的铜作改进剂时,硒的特征浓度为0.13 ng/1％abs,测定精度为3.4％～5.4％;线性范围达400 ng。     

Direct cross-coupling of aryl alkynyliodines with arylsulfinic acids leading to alkynyl sulfones under catalyst-free conditions

A facile and efficient one-pot method has been developed for the construction of alkynyl sulfones via direct cross-coupling reaction of aryl alkynyliodines and arylsulfinic acids. The present transformation could be accomplished under catalyst- and additive-free conditions, providing a series of alkynyl sulfones in moderate to good yields with favorable functional group tolerance.     

RESEARCH ON ELECTROMAGNETIC RADIATION DURING THE EXPLOSION PROGRESS OF COMPOSITION B EXPLOSIVES$^{\bf 1)}$

炸药爆炸过程中产生明显的电磁辐射干扰在很多领域引起了重视, 爆炸产生电磁辐射的机理和理论模型都不成熟, 实验仍然是研究这一现象的重要手段. 本文设计了不同质量的B炸药爆炸电磁辐射实验, 测量了爆炸整个过程中不同时刻的电磁辐射信号. 通过小波分析方法对实测信号进行处理, 得到真实信号和信号的时频特点, 小波分析得到真实信号的频谱主要分布在0$\sim$50 kHz. 利用自主开发的EXPLOSION-3D软件对实验工况进行数值模拟, 得到爆炸过程不同时刻流场的特点. 对比实验结果和数值模拟结果得出: 第一个脉冲信号是由B炸药爆轰产生的高温高压等离子体直接产生的电磁脉冲; 第二个脉冲信号是由地面反射的冲击波追上前沿冲击波, 空气冲击波阵面处形成的等离子体产生的电磁脉冲; 第三个脉冲信号是冲击波撞击测量线圈引起的无效信号. 其中, 第一个电磁脉冲幅值与当量的1/3次方基本呈线性关系, 其到达时间对炸药药量不敏感; 第二个电磁脉冲出现的时间与炸药的当量成指数关系, 药量越大, 出现时间越晚. 通过对第二个脉冲信号的分析, 得出了冲击波反射形成电磁脉冲信号时的爆炸波流场特征, 为后续相关理论机理研究提供了验证数据.     

陶瓷靶抗射流侵彻的理论模型及数值模拟

以球型空腔膨胀理论为基础,提出了一个计算陶瓷靶板阻力的损伤模型,该模型考虑了损伤因子对陶瓷靶板弹道性能的影响.结合不可压缩流体力学理论,对射流侵彻陶瓷靶板的侵彻速度进行了理论值计算,并与未考虑损伤的侵彻速度进行了比较,该模型的计算结果更接近实验结果.建立了射流侵彻陶瓷靶板的数值计算模型,对铜射流侵彻陶瓷靶的动态破坏过程进行了研究,讨论了药型罩的锥角、壁厚对射流侵彻结果的影响,结果表明:相同锥角的药型罩,壁厚对陶瓷靶板孔径的影响较小;同壁厚的药型罩,随着锥角的增大,侵彻孔径增大.侵彻速度的数值模拟结果与理论结果进行了比较,得到了较好的一致性.     

White light interferometry test and analysis of LiNbO3 polarizer

White light interferometer can be used to measure the amplitude extinction ratio (ER) of polarizer and coupling distribution in fiber. A LiNbO₃ polarizer coupled with a polarization maintaining fiber and a silica planar waveguide at the two ends was measured using white light interferometer. According to the principles of optical coherence domain polarimeter (OCDP) technique, the test scheme is analyzed and presented to measure the ER of LiNbO₃ polarizer with its apparatus proposed correspondingly. By analyzing the interference intensity, both the ER of LiNbO₃ polarizer and its coupling crosstalk with optical fiber and waveguide are obtained. The results illustrate that the ER of a 5 mm-long LiNbO₃ polarizer is 71 dB and the crosstalk of the coupling points are around 40 dB. The results have good agreement with analysis.     

Two Dimensional 1HNMR Studies on 2′5′-Dideoxyadenosylcobalamin

The ¹HNMR spectrum of 2′,5′-dideoxyadenosylcobalamin, a Coenzyme B₁₂(5′-deoxyadenosylcobalamin) analogue, has been assigned by 2D COSY. Its proton coupling constants have also been measured by J-resolved experiment. The comparison between the analogue and Coenzyme B¹² was made.     

The Advanced Multi‐functional Electrocatalyst Efficiently Built from Multi‐integrated Sites for Overall Water Splitting and Rechargeable Zinc‐air Battery

Exploration of cost‐effective, high‐performance and durable multifunctional electrocatalysts is of significant importance for renewable energy conversion and storage. In this work, a simple strategy is developed to tailor the nickel metal with the collaboration of nitrogen‐doped graphene and single‐walled carbon nanotubes. The resulted nickel catalyst exhibits superior trifunctional activities for oxygen evolution, hydrogen evolution and oxygen reduction reactions in the same electrolyte, even comparable to commercial Pt/C and RuO₂ respectively, which can be attributed to the synergistic advantages between nickel, nitrogen and carbon, mainly including abundant integrated active sites achieved by the irregular charge distribution among C?N and Ni?N coupling centers. Such remarkable effects on trifunctional catalysis elicit the efficient overall water splitting, and endow the assembled zinc‐air battery with a good performance. These highlight the metallic nickel as an advanced multifunctional electrocatalysts with integrated sites developed from the collaboration of two different carbon nanomaterials.     

A novel definition method of optical asphericity

In view of the fact that methods for calculating asphericity of optical aspheric surface are nonuniform, a novel definition method named least maximal error method is proposed on the basis of an analysis of the common calculating methods. It fully unifies the asphericity calculation for conicoid and high-order aspheric surface. It finds the best-fitting spherical surface, notes the maximum deviation between aspheric surface and the best-fitting spherical surface minimum, and this maximum deviation is defined as the maximal asphericity of aspheric surface. The theory of the definition method and some calculation examples are put forward. The method is suitable for computer programming and its result is accurate.     

Synthesis and analysis of phosphorylated nonapeptide adducts by LC/Q-TOF MS

A new method for the synthesis of organophosphorylated adducts of the nonapeptide FGESAGAAS is presented. The adducts were obtained by using sarin (GB) or soman (GD) as the organophosphorylating reagents and cesium carbonate as the acid scavenger. Greater than 50% of the peptide was modified on serine 4. MS/MS spectra acquired on an Agilent 6520 quadrupole time of flight mass spectrometer demonstrated that serine 4, but not serine 9 in the nonapeptide, was modified. The adducts included the characteristic isopropyl group of sarin and the pinacolyl group of soman, indicating that aging had not occurred. It was concluded that the new synthetic method yielded sarin and soman-modified peptides that could be used as references when analyzing human exposure to these nerve agents.     

Screening of Potential Anti-Thrombotic Ingredients from Salvia miltiorrhiza in Zebrafish and by Molecular Docking

Background: Danshen (DS), the dry root of Salvia miltiorrhiza Bge., has been used in traditional Chinese medicine (TCM) for many years to promote blood circulation and to inhibit thrombosis. However, the active ingredients responsible for the anti-thrombotic effect and the underlying mechanisms are yet to be fully elucidated. Methods: Molecular docking was used to predict the active ingredients in DS and their potential targets by calculating the scores of docking between DS ingredients and thrombosis-related proteins. Then, a chemical-induced zebrafish thrombosis model was applied to confirm their anti-thrombotic effects. Result: The molecular docking results indicated that compared to the control ligand, higher docking scores were observed for several compounds in DS, among which salvianolic acid B (SAB), lithospermic acid (LA), rosmarinic acid (MA), and luteolin-7-O-β-d-glucoside (LG) could attenuate zebrafish caudal vein thrombosis and recover the decrease in heart red blood cells (RBCs) in a dose-dependent manner. Conclusions: Our study showed that it is possible to screen the potential active components in natural products by combining the molecular docking method and zebrafish in vivo model.