反应离子刻蚀和自组装分子膜构建硅基底疏水与超疏水表面

采用反应离子刻蚀技术在Si(100)表面加工微米级圆柱阵列, 采用自组装技术分别制备了3种硅烷自组装分子膜. 结果表明, 采用反应离子刻蚀构建出的4种微米级圆柱阵列结构规整, 其直径为5 μm, 高度为10 μm, 间距为15~45 μm. 沉积自组装分子膜后, 试样表面的水接触角显著增大, 其中沉积1H,1H,2H,2H-全氟癸基三氯硅烷(FDTS)自组装分子膜接触角最大, 1H,1H,2H,2H-全氟辛烷基三氯硅烷(FOTS)次之, 三氯十八硅烷(OTS)最小. 测得的接触角大于150°时接近Cassie方程计算的接触角, 而小于150°时接近Wenzel方程计算的接触角. 改变圆柱阵列的间距和选择不同的自组装分子膜, 可以控制表面接触角的大小. 原子力显微镜(AFM)观测结果显示, 沉积自组装分子膜可以产生纳米级的团簇. 由微米级圆柱阵列和纳米级自组装分子膜构成的表面结构使Si试样表面接触角最大可达156.0°.     

Binuclear zinc(II) complexes with the anti-inflammatory compounds salicylaldehyde semicarbazone and salicylaldehyde-4-chlorobenzoyl hydrazone (H2LASSBio-1064)

Complexes [Zn₂(HL¹)₂(CH₃COO)₂] (1) and [Zn₂(L²)₂] (2) were synthesized with salicylaldehyde semicarbazone (H₂L¹) and salicylaldehyde-4-chlorobenzoyl hydrazone (H₂LASSBio-1064, H₂L²), respectively. The crystal structure of (1) was determined. Upon recrystallization of previously prepared [Zn₂(HL²)₂(Cl)₂] (3) in 1:9 DMSO:acetone crystals of [Zn₂(L²)₂(H₂O)₂]·[Zn₂(L²)₂(DMSO)₄] (3a) were obtained. The crystal structure of 3a was also determined. All crystal structures revealed the presence of phenoxo-bridged binuclear zinc(II) complexes.     

Combined chemical and phase equilibrium for the hydration of ethylene to ethanol calculated by means of the Peng-Robinson-Stryjek-Vera equation of state and the Wong-Sandler mixing rules

Due to the economics of the ethylene market and the subsidized production of fermentation-based ethanol in some countries, use of the ethylene hydration process to make ethanol has been steadily declining. The economics of this process might improve by combining the reaction and separation in a reactive distillation column, whose conceptual design requires a study of the combined chemical and phase equilibrium (CPE) of the reacting system. In this work, the Peng-Robinson-Stryjek-Vera equation of state was combined with the UNIQUAC activity coefficient model through the Wong-Sandler (WS) mixing rules in order to correlate the available experimental data for the vapor-liquid equilibria (VLE) of the ethylene-water, ethylene-ethanol, and ethanol-water binary systems at 200 °C. The interaction energies of the UNIQUAC model and the binary interaction coefficient of the WS mixing rules were used as the fitting parameters. From the optimum values of these parameters, both the VLE and the combined CPE of the ethylene-water-ethanol ternary system were predicted at 200 °C and various pressures. At this temperature, the catalytic activity of a H-pentasil zeolite has already been reported to exhibit a maximum for ethylene hydration, and also the experimentally measured two-phase region of the ternary system is sufficiently wide. By means of the reactive flash method, the chemical equilibrium compositions of the liquid and vapor phases were determined for several pressures, and the equilibrium conversion and the vapor fraction were calculated as functions of the ethylene to water feed mole ratio. It turns out that the vapor-liquid mixed-phase hydration of ethylene achieves equilibrium conversions much higher than those computed for a vapor-phase reaction that would hypothetically occur at the same conditions of pressure and feed mole ratio. It was found that the reactive phase diagram of the ternary system exhibits a critical point at 200 °C and 155 atm.     

Responsive polymers for analytical applications: A review

Stimuli-responsive polymers are capable of translating changes in their local environment to changes in their chemical and/or physical properties. This ability allows stimuli-responsive polymers to be used for a wide range of applications. In this review, we highlight the analytical applications of stimuli-responsive polymers that have been published over the past few years with a focus on their applications in sensing/biosensing and separations. From this review, we hope to make clear that while the history of using stimuli-responsive polymers for analytical applications is rich, there are still a number of directions to explore and exciting advancements to be made in this flourishing field of research.