铁电SBN薄膜电光系数的测量及其在波导中的应用

利用溶胶-凝胶法在MgO(001)衬底上获得C轴择优取向的铁电铌酸锶钡(SBN)薄膜,主要介绍MgO(001)衬底上SBN60薄膜及掺入的K离子与Nb离子摩尔比例为1：3的SBN60薄膜横向电光系数r51的测量,实验测得不掺K的SBN60薄膜r51值为37．6pm／V,掺K的r51值为58．5pm／V。并由此设计一种基于MgO(001)衬底上的马赫一曾德尔型SBN60薄膜波导调制器,计算出在633nm时,掺K比例为1：3的此种波导调制器半波调制电压值为10V,不掺K的半波电压值为16V,结果说明掺入K离子能增加薄膜的横向电光系数并有效的减少波导的半波调制电压。     

利用频闪结构光测量旋转叶片的三维面形

在对快速甚至高速运动物体进行研究时,需要对运动物体各个时刻的三维面形和形变量进行数字化描述。提出了一种利用频闪光作为结构照明光源,基于傅里叶变换轮廓术对旋转叶片每个时刻的三维面形和变形量进行动态测量的光学方法。使用自行设计的同步控制单元对风扇叶片旋转位置进行检测,用该检测信号同步驱动频闪结构光源的发光和图像采集系统“冻结”记录下旋转叶片表面变形条纹的瞬时图像,再运用傅里叶变换轮廓术计算出每一瞬间时刻旋转叶片的三维面形,分析这些三维面形数字化结果可以进一步得到旋转叶片的变形量。通过对家用电风扇的实验,验证了该方法的合理性和可行性。该方法可望在高速运动物体的面形和变形研究上有广泛运用。     

Catalytic synthesis of single-crystalline gallium nitride nanobelts

Single-crystalline gallium nitride nanobelts have been synthesized through the reaction of gallium vapor with flowing ammonia using nickel as a catalyst. The as-synthesized products were characterized using X-ray powder diffraction (XRD), scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and selected-area electron diffraction (SAED). XRD and SAED results revealed that the products are pure, single-crystalline GaN with hexagonal structure. The widths and thickness of the nanobelts ranged from 80 to 200 nm, and 10 to 30 nm, respectively. The lengths were up to several tens of micrometers. The nanobelts had smooth surface with no amorphous sheath, and a sharp-tip end. The growth mechanism of nanobelts was discussed.     

激光诱导叶绿素荧光寿命的测量及其特性分析

提出了一种用于评估植物生长状况及环境监测的激光诱导叶绿素荧光寿命测量方法. 采用波长355 nm的激光作为光源激发叶绿素荧光, 由光电倍增管接收其荧光信号, 由于被测叶绿素荧光衰减函数与激光脉冲、仪器响应函数卷积在一起, 根据它们的特性, 运用时间分辨测量法分别测得叶绿素荧光及其背景信号, 并结合一种新型解卷积算法可分离出真实的叶绿素荧光衰减函数, 从而获取叶绿素的荧光寿命. 测试结果表明: 该方法能够实现叶绿素荧光寿命的高精度实时监测, 对不同叶绿素含量的溶液荧光寿命进行了测试, 证明叶绿素含量与其荧光寿命具有相关性, 并且拟合了叶绿素含量与荧光寿命的标定曲线. 关键词： 荧光寿命 激光诱导荧光 时间分辨测量法 叶绿素含量     

基于Add-drop型微环谐振腔的硅基高速电光调制器设计

相比于传统的All-pass型微环谐振腔硅基电光调制器, Add-drop型微环谐振腔可提供更多的设计自由度, 使调制器在不改变杂质掺杂浓度的情况下就能在调制带宽和消光比性能上获得均衡考虑. 本文设计了基于Add-drop型微环谐振腔的高速、且在低调制电压下实现大消光比的硅基电光调制器, 所用微环谐振腔的半径仅仅为20 μm. 重点分析了直波导与微环谐振腔的耦合对调制器性能的影响, 发现较小的Drop端耦合系数有利于消光比的提高, 但是不能同时达到最佳的调制带宽, 因此设计上存在一个带宽和消光比性能上的折中考虑. 根据优化设计的结果进行了实际器件的制作和测试. 静态光谱测试表明, 在3 V反向偏置电压的作用下, 调制器的消光比最大可达12 dB. 动态电光响应测试中, 在仅仅1.2 V的信号幅值电压下测得了8 Gbps数据传输速率的清晰眼图. 关键词： 电光调制器 绝缘体上的硅 微环谐振腔 载流子色散效应     

脉冲敲击技术对PI微球表面粗糙度的影响

作为点火靶重要候选靶丸之一, 聚酰亚胺 (PI) 空心微球采用降解芯轴技术结合双单体气相沉积聚合法 (VDP) 制备. 在PI涂层过程中微球碰撞对表面质量影响较大, 为了减小碰撞提高表面质量, 选用筛网盘做样品盘, 激励方式由压电振动模式改为脉冲敲击模式进行对比. 实验数据表明微球运动过程中碰撞是引起表面质量变差的原因, 通过理论分析确认了筛网盘通过减少接触点可以减少微球与微球间、微球与样品盘间的碰撞, 并且将压电振动改为脉冲敲击模式可以减小微球碰撞次数. 脉冲敲击模式与压电振动模式相比, 其可控性、微球弹跳幅度、消除静电等方面均优于压电振动. 对于微球壁厚均匀性而言, 压电振动略好于脉冲敲击, 但相差较小. 单个微球的壁厚最大偏差前者为0.68 μm, 优于后者的0.73 μm; 单个微球壁厚平均值在同一批次内的最大起伏, 前者为0.26 μm, 优于后者0.57 μm. 白光干涉仪数据显示脉冲敲击起到了提高微球表面质量的作用, 其表面粗糙度Rq值由52–93 nm 减小到28–44 nm. 关键词： 脉冲敲击技术 聚酰亚胺靶丸 表面粗糙度 壁厚均匀性     

高Q值超薄完美吸波体设计方法研究

为了增强完美吸波体的吸波性能,提出了一种高Q值超薄完美吸波体的设计方法. 该方法将基片集成波导技术与一般完美吸波体设计方法有机结合,通过合理添加金属过孔实现了高Q值的完美吸波体设计. 利用该方法设计出了厚度0.0065λ、半波功率带宽5.8%的完美吸波体,其吸波率Q值为33.9,比普通完美吸波体吸波率Q值提升了20%以上;其1.5和3 dBsm的雷达散射截面缩减Q值分别提高了54%和67%以上;同时该方法消除了传统设计中的频率偏移问题. 实测与仿真结果表明所设计的吸波体具有高Q值特征,也具有良好的雷达散射截面缩减效果,散射截面缩减最高达14 dBsm. 仿真和实测验证了设计方法的可靠性. 关键词： 基片集成波导技术 频率偏移 吸波率 雷达散射截面     

Dielectric loss of half-doped manganite Lao.sCao.sMnO3＊

The dielectric loss tanfi of half-doped manganite Lao.sCao.sMnO3 is investigated using Green＇s function technique. The Lao.sCao.sMnO3 is described by the Kondo-lattice model in the double exchange limit, taking into account the Jahn- Teller distortion and the super-exchange interaction between the localized electrons. It is found that the intensity of tans decreases with increasing [e]TI, V, and U. It is also observed that the transition temperature Tp rises as l eJTI and U increase. It is worth noting that Tp remains unchanged and the strength of tans increases with increasing g. The calculated dielectric loss results are explained theoretically, and these behaviors are in qualitative agreement with the experimental results.     

Densification and lithium ion conductivity of garnet-type Li7-xLa3Zr2-xTaxO12 （x=0.25） solid electrolytes

The garnet-type Li7La3Zr2O12 ceramic is a promising solid electrolyte for all-solid-state secondary lithium batteries. However, it faces the problem of lithium volatilization during sintering, which may cause low density and deterioration of ionic conductivity. In this work, the effects of sintering temperature and addition on the density as well as the lithium ion conductivity of Li7-xLa3Zr2-xTaxO12 (LLZTO, x=0.25) ceramics prepared by solid state reaction have been studied. It is found that optimization of the sintering temperature leads to a minor increase in the ceramic density, yielding an optimum ionic conductivity of 2.9×10-4 S·cm-1 at 25℃. Introduction of Li 3 PO 4 addition in an appropriate concentration can obviously increase the density, leading to an optimum ionic conductivity of 7.2×10-4 S·cm-1 at 25℃. This value is superior to the conductivity data in most recent reports on the LLZTO ceramics.     

Reflection of Surface Plasmon Polaritons by a Corner Reflector of Negative Index Materials

A novel type of corner reflector for the reflection of surface plasmon polariton (SPP) is proposed. The reflector consists of two layers of compensatory media whose permittivity and permeability take opposite signs to that of the corresponding layer of the SP waveguide. By rigorously solving Maxwell's equations, the reflected SPP is proved to exist. The transverse wave vector of the reflected SPP is always antiparallel to that of the incident SPP and no phase retardation is introduced.