Modified High‐Nickel Cathodes with Stable Surface Chemistry Against Ambient Air for Lithium‐Ion Batteries

High‐Ni layered oxides are promising next‐generation cathodes for lithium‐ion batteries owing to their high capacity and lower cost. However, as the Ni content increases over 70 %, they have a high dynamic affinity towards moisture and CO₂ in ambient air, primarily reacting to form LiOH, Li₂CO₃, and LiHCO₃ on the surface, which is commonly termed “residual lithium”. Air exposure occurs after synthesis as it is common practice to handle and store them under ambient conditions. The air exposure leads to significant performance losses, and hampers the electrode fabrication, impeding their practical viability. Herein, we show that substituting a small amount of Al for Ni in the crystal lattice notably improves the chemical stability against air by limiting the formation of LiOH, Li₂CO₃, LiHCO₃, and NiO in the near‐surface region. The Al‐doped high‐Ni oxides display a high capacity retention with excellent rate capability and cycling stability after being exposed to air for 30 days.     

Azaphenanthrene alkaloids with antitumoral activity from Anaxagorea dolichocarpa Sprague & Sandwith (Annonaceae)

Phytochemical investigation of Anaxagorea dolichocarpa Sprague & Sandwith led to isolation of three azaphenanthrene alkaloids: eupolauramine, sampangine and imbiline 1. Their chemical structures were established on the basis of spectroscopic data from IR, HR-ESI-MS, NMR (including 2D experiments) and comparison with the literature. Sampangine and imbiline 1 are being described in the Anaxagorea genus for the first time. Eupolauramine and sampangine show concentration-dependent antitumoral activity in leukemic cells K562 with IC(50) of 18.97 and 10.95 μg/mL, respectively.     

Photochemistry of Bacteriochlorophylls in Human Blood Plasma: 1. Pigment Stability and Light-induced Modifications of Lipoproteins

Transmetalated derivatives of bacteriochlorophyll are promising sensitizers in photodynamic therapy. Protocols using short delay times between injection and irradiation cause interest in the photochemistry of these pigments in the blood. Using near-infrared irradiation where these pigments absorb strongly, we have studied the photochemistry of Zn- and Pd-bacteriopheophorbide (WST09), and of the highly polar taurinated Pd-derivative, WST11, in isolated fractions of human blood plasma. The stability of all pigments is increased in blood plasma, compared with monomeric solutions. Pd-bacteriopheophorbide is much more stable than the other two derivatives. It also has a higher capacity for inducing reactive oxygen species, yet the consumption of oxygen is comparable. There is furthermore evidence for photobleaching under anoxic conditions. The generation of hydroperoxides (ROOH) is faster with Pd- than with Zn-complexes; the formation of endoperoxides (ROOR′), measured as thiobarbituric acid reactive substances, is comparable with the two central metals. Formation of both ROOH and ROOR′ is increased in low-density lipoproteins (LDL) compared with high-density lipoproteins (HDL), which is probably related to the higher concentration of target molecules in the former. In HDL, extensive cross-linking is induced among the apolipoproteins; judged from the electrophoretic mobility of LDL and HDL particles, there is also a gross structural change. Photosensitized cross-linking is much less pronounced with high-density proteins.     

Copper determination in biological materials by ETAAS using W-Rh permanent modifier

A tungsten-rhodium treatment on the integrated platform of a transversely heated graphite atomiser was used as a permanent chemical modifier for the determination of copper in biological materials by using digested samples as well as slurry sampling in electrothermal atomic absorption spectrometry. The W-Rh permanent modifier was as efficient as Pd+Mg(NO(3))(2) conventional modifier for obtaining good Cu thermal stabilisation in the digested and slurry samples. The permanent W-Rh modifier remained stable by approximately 300 and 250 firings when 20 mul of digested sample and 20 mul of slurry were delivered into the atomiser, respectively. In addition, the permanent modifier increased the tube lifetime up to 1370 and 744 analytical measurements in the digested and slurry samples, respectively. Also, when the W-Rh permanent modifier was employed, there was less variation of the slope of the analytical curves during the total atomiser lifetime, resulting in a decreased need of re-calibration during routine analysis, increasing the sample throughput, and consequently diminishing the variable analytical costs. Detection limits obtained with W-Rh permanent modifier were 0.64 and 0.33 mug g(-1) Cu for digested (dilution factor 100 ml g(-1)) and 1.0% m/v slurries of biological materials, respectively. Results for the determination of copper in the samples were in agreement with those obtained with decomposed sample solutions by using Pd+Mg(NO(3)), since no statistical differences were found after applying the paired t-test at the 95% level.     

Comparison of methods to estimate the free energy of solvation:Importance in the modulation of the affinity of 3-benzazepines for the D1receptor

We computed the free energy of solvation for a series of ions and neutral molecules using two different continuum approaches. First, we used the AM1–SM1 technique, where the AM1 Fock matrix is modified to include a generalized Born contribution. Second, we applied the DelPhi approach, where the electrostatic component of the free energy of solvation is evaluated by resolving the Poisson–Boltzman equation by a finite difference method. Both methods appear equally reliable for ionic systems. For neutral compounds, AM1–SM1 performs better than DelPhi; however, the differences become less pronounced for compounds with larger free energies of solvation. In parallel, both methods were applied to study the influence of the solvation process in the overall drug receptor interaction for a series of closely related ligands for the D₁ dopamine receptor. An inverse linear relationship was found between the free energy of solvation and the logarithm of the affinity of the ligands; nevertheless, electrostatic properties are likely to modulate affinity as well. © 1993 John Wiley & Sons, Inc.     

Co-Treatment of Purified Annatto Oil (Bixa orellana L.) and Its Granules (Chronic®) Improves the Blood Lipid Profile and Bone Protective Effects of Testosterone in the Orchiectomy-Induced Osteoporosis in Wistar Rats

This study aimed to evaluate and compare the effects of co-treatment with purified annatto oil (PAO) or its granules (GRA, Chronic^®) with that of testosterone on the orchiectomy-induced osteoporosis in Wistar rats. After surgery, rats were treated from day 7 until day 45 with testosterone only (TES, 7 mg/kg, IM) or TES + PAO or GRA (200 mg/kg, p.o.). The following parameters were evaluated: food/water intake, weight, HDL, LDL, glucose, triglycerides (TG), total cholesterol (TC), alkaline phosphatase levels, blood phosphorus and calcium contents, femur weight, structure (through scanning electron microscopy), and calcium content (through atomic absorption spectrophotometry). Our results show that orchiectomy could significantly change the blood lipid profile and decrease bone integrity parameters. Testosterone reposition alone could improve some endpoints, including LDL, TC, bone weight, and bone calcium concentration. However, other parameters were not significantly improved. Co-treatment with PAO or GRA improved the blood lipid profile and bone integrity more significantly and improved some endpoints not affected by testosterone reposition alone (such as TG levels and trabeculae sizes). The results suggest that co-treatment with annatto products improved the blood lipid profile and the anti-osteoporosis effects of testosterone. Overall, GRA had better results than PAO.     

The BIOREMA project—part 3: International interlaboratory comparison for bio-ethanol test methods

The main objective of the reference materials for biofuel specifications (BIOREMA) project is the development of two test materials (one bio-ethanol material and one biodiesel material) with well-established reference values. Of a series of three papers, this part describes the material preparation, homogeneity study, stability study, and characterisation of the bio-ethanol material. The test material thus obtained was used in an interlaboratory comparison (ILC) to assess current practices and comparability amongst laboratories providing bio-ethanol testing services. Only 13 participants provided data, resulting in a small dataset for evaluation. Further, it appeared that for a number of laboratories, there was not sufficient material for the determination of all requested parameters. In most cases, as far as the data permit, it can be concluded that the consensus values (based on participant’s results) are in good agreement with the reference or the BIOREMA values (obtained by NMIs participating in the project). For three parameters, namely ethanol content, water content, and density, there is good agreement between the reference and consensus values. For these parameters, the reproducibility standard deviation is close to, or even smaller than, the expanded uncertainty associated with the reference value. A number of parameters show very poor reproducibility, for example, pH_e, electrolytic conductivity, and acidity. The same applies to sodium and copper content, which are very low and therefore challenging parameters to measure accurately. The results of the ILC underpin the need for certified reference materials and demonstrate the requirement for more robust quality control to improve the precision and trueness of the results from testing laboratories.     

Scandium-catalyzed allylboration of aldehydes as a practical method for highly diastereo- and enantioselective construction of homoallylic alcohols

A general approach for the allylation of aldehydes using stable, air-tolerant camphor-based chiral allylboronates under Sc(OTf)3 catalysis is described. This practical methodology provides both syn and anti propionate units and other homoallylic alcohols with very high levels of diastereo- and enantioselectivity for several substrates, including functionalized aliphatic aldehydes useful toward the elaboration of complex natural products.     

Interaction of divalent cations with silica modified with histamine evaluated by adsorption and thermochemical data

Silica gel was modified by silanization reaction followed by functionalization of histamine in a heterogeneous route. These materials were characterized by elementary nitrogen and chloride analyses, porosity, thermogravimetry, and infrared. The functionalized surface adsorbed Cu(II), Co(II), Ni(II), and Zn(II) ions in an aqueous solution at 25 °C. The isotherms of adsorption are in accordance with Langmuir model and the surface presented a great potential to form complexes metal-surface in the chemical reason of 1:1.     

A comparison of depletion versus equalization for reducing high-abundance proteins in human serum

In this work three methods to diminish the content of most highly abundant proteins in human serum have been studied and compared. Protein depletion with ACN or DTT and protein equalization with the ProteoMiner^? (PM) have been assessed by 1‐D gel electrophoresis and MS. After treatment 5, 18 and 9 major proteins within the 20 most abundant proteins in serum were identified for the ACN, DTT and PM methods, respectively. The ACN method was efficient for depleting high molecular weight proteins, over 75 KDa, resulting in 10±4% (n=3) of the total protein content remaining in the depleted serum. In addition, 75% of the proteins belonging to the group of the 20 most abundant proteins were not detected, making this depletion strategy a cheap alternative to expensive commercial tools regularly used for removing high abundance proteins from serum. The ACN extract was found rich in apolipoproteins. The dithithreitol method promotes the precipitation of proteins rich in disulfide bonds, mainly albumin, with 73±7% (n=3) of the total protein content remaining in the depleted serum, which was found rich in immunoglobulins. The PM method compresses the dynamic range of the serum proteins, rendering an extract containing 16±2% (n=3) of the total initial protein content. The extract was found to be rich in both apolipoproteins and immunoglobulins. As a general rule the DTT and PM methods provide a compression of the dynamic range of serum protein concentrations while the ACN method allows an effective depletion of the protein fraction above 72 KDa.