Technology for producing adsorbents from petroleum residues

Advantage of use residue from thermal cracking and products of its condensation as components of the mixture for manufacturing mechanically rigid (93%) granulated and ground carbon sorbents with extended volume of micropores (up to 0.27 cm³/cm³), showing enhanced sorption activity (E is up to 25.6 kJ mol^?1) and high ability of separation various gas mixtures is demonstrated. As a carrier for medicine preparations these adsorbents show higher performance as compared with industrial samples. Solutions of the cracking residue can be used for impregnation of worked out zeolites for petroleum technology and for production of organomineral adsorbents with high adsorption capacity on extraction mercury from sewages.     

Evaluation of the capillary pressure in a liquid interlayer between the particles of a dispersed phase

The capillary pressure in a liquid interlayer between two spherical particles is calculated as a function of their sizes and the wetting properties of the liquid.     

Competitive influence of atactic polystyrene and supercritical carbon dioxide on the conformation of syndiotactic polystyrene

The crystallization behavior of miscible syndiotactic polystyrene (sPS) and atactic polystyrene (aPS) blends with different sPS/aPS weight ratios was investigated in supercritical CO₂ by using Fourier‐transform infrared spectroscopy, differential scanning calorimetry, and wide‐angle X‐ray diffraction. Supercritical CO₂ and aPS exhibited different effects on the conformational change of sPS and competed with each other. Increasing the content of amorphous aPS in the blends made its effect on the conformational change of sPS gradually surpass that of supercritical CO₂. Supercritical CO₂ favored the formation of the helical conformation of sPS in lower temperature range and the all trans planar conformation in higher temperature range, instead of forming the latter one only in higher temperature range in ambient atmosphere. However, increasing aPS content in the blends pushed the range for forming the helical conformation to lower temperature and made the all trans planar conformation dominant in aPS/sPS 25/75 blend after treating in supercritical CO₂ above 60 °C. The all trans planar zigzag conformation was more favorable than the helical conformation after mixing aPS in sPS in supercritical CO₂. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1755–1764, 2007     

Synthesis of graft copolymers with “V‐shaped” and “Y‐shaped” side chains via controlled radical and anionic polymerizations

A combination of nitroxide‐mediated radical polymerization and living anionic polymerization was used to synthesize a series of well‐defined graft (co)polymers with “V‐shaped” and “Y‐shaped” branches. The polymer main chain is a copolymer of styrene and p‐chloromethylstyrene (PS‐co‐PCMS) prepared via nitroxide‐mediated radical polymerization. The V‐shaped branches were prepared through coupling reaction of polystyrene macromonomer, carrying 1,1‐diphenylethylene terminus, with polystyryllithium or polyisoprenyllithium. The Y‐shaped branches were prepared throughfurther polymerization initiated by the V‐shaped anions. The obtained branches, carrying a living anion at the middle (V‐shaped) or at the end of the third segment (Y‐shaped), were coupled in situ with pendent benzyl chloride of PS‐co‐PCMS to form the target graft (co)polymers. The purified graft (co)polymers were analyzed by size exclusion chromatography equipped with a multiangle light scattering detector and a viscometer. The result shows that the viscosities and radii of gyration of the branched polymers are remarkably smaller than those of linear polystyrene. In addition, V‐shaped product adopts a more compact conformation in dilute solution than the Y‐shaped analogy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4013–4025, 2007     

A co‐ordinate system independent streamwise upwind method for fluid flow computation

A new co‐ordinate invariant streamwise upwind formulation for convection dominated flows is developed. The eddy diffusivity/viscosity is added directly to the equations in order to remove the oscillations in the solution. The equations then can be solved by any high‐order scheme and the solution retains the accuracy of the high‐order scheme. The accuracy and reduced lateral thickness growth rate are demonstrated with several numerical examples, including pure convective flows and lid‐driven cavity flow. The lateral spreading due to the numerical diffusion is controlled by the anisotropic tensor. Copyright © 2004 John Wiley & Sons, Ltd.     

Application of ultrafine-dispersed diamonds in electroplating

The results obtained upon the electrochemical deposition of composite coatings containing ultrafine-dispersed diamonds produced by detonation synthesis are generalized. The main advantages of such coatings over the well-known composite electrochemical coatings are revealed.     

Modeling of the structure and electronic structure of condensed phases of small fullerenes C<Subscript>28</Subscript> and Zn@C<Subscript>28</Subscript>

A comparative analysis of the stability factors and electronic structure of two possible crystalline forms of small fullerene C₂₈ and endohedral fullerene Zn@C₂₈ with diamond and lonsdaleite structures is performed using a cluster model. Atoms of elements that, when placed inside C₂₈ cages, have no significant effect on the stability of free small-fullerene molecules are shown to be able to dramatically change the electronic properties and reactivity of the C₂₈ skeleton and to be favorable for forming small-fullerene crystalline modifications, which are covalent crystals. In contrast, if the presence of foreign atoms inside C₂₈ cages stabilizes the isolated nanoparticles, then molecular crystals (such as C₆₀ fullerites) are formed due to weak van der Waals forces.     

On a Countable-Point Nonlinear Boundary-Value Problem on a Semiaxis for Ordinary Differential Equations in the Space of Bounded Numerical Sequences

We use the idea of the Samoilenko numerical-analytic method for the investigation of a nonlinear boundary-value problem with an unbounded countable set of boundary moments on the positive semiaxis in the case where the differential equation and boundary conditions are defined in the Banach space of bounded numerical sequences.     

Synthesis of side‐chain liquid‐crystalline homopolymers and triblock copolymers with p‐methoxyazobenzene moieties and poly(ethylene glycol) as coil segments by atom transfer radical polymerization and their thermotropic phase behavior

A series of side‐chain liquid‐crystalline (LC) homopolymers of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with different degrees of polymerization were synthesized by atom transfer radical polymerization (ATRP), which were prepared with a wide range of number‐average molecular weights from 5.1 × 10³ to 20.6 × 10³ with narrow polydispersities of around 1.17. Thermal investigation showed that the homopolymers exhibit two mesophases, a smectic phase, and a nematic phase, and the phase‐transition temperatures of the homopolymers increase clearly with increasing molecular weights. A series of novel LC coil triblock copolymers with narrow polydispersities was synthesized by ATRP, and their thermotropic phase behavior was investigated with differential scanning calorimetry and polarized optical microscopy. The LC coil triblocks were designed to have an LC conformation of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with a wide range of molecular weights from 3.5 × 10³ to 1.7 × 10⁴ and the coil conformation of poly(ethylene glycol) (PEG) (number‐average molecular weight: 6000 or 12,000) segment. Their characterization was investigated with ¹H NMR, Fourier transform infrared spectra, and gel permeation chromatography. Triblock copolymers exhibited a crystalline phase, a smectic phase, and a nematic phase. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased, and the crystallization of PEG depressed with increasing molecular weight of the LC block. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2854–2864, 2003