Storage Stability of LiFePO4/C in Humid‐hot Air

Storage stabilities of LiFePO₄/C composite at different conditions are investigated in terms of structural and electrochemical evolutions. The results from different aging tests indicate that moisture and temperature are the key factors that have the most profound effects on the structure homogeneity which in turn influences the electrochemical performance of LiFePO₄/C. Although the storage in a humid‐hot environment, such as saturated humidity air at 50°C, does not greatly influence the discharging capacity of LiFePO₄/C, it does reduce the initial charging capacity, thus the amount of reversible Li⁺ ions in a practical LiFePO₄/graphite cell decreases. This impact is explained by the lithium extraction during the storage, forming olivine FePO₄ and associated Li₃PO₄. Elevated storage temperature also favors the delithiation process. The degree of delithiation increases from about 6% at 50°C to 18% at 80°C. It is also found that re‐calcination at 650°C effectively resolves the problem of the structural heterogeneity of the stored LiFePO₄/C. Therefore both the initial charging capacity and coulombic efficiency of the stored sample in the first cycle revert to the original value of the fresh one.     

Enhanced Electrochemical Performances of LiFePO4/C via V and F Co-doping for Lithium-Ion Batteries

Based on the method of in situ polymerization synthesis combined with two-step sinter-ing process, LiFe_1-xV_x(PO₄)_(3-y)/₃F_y/C was prepared. The e ects of V and F co-doping on the structure, morphology, and electrochemical performances of LiFePO₄/C were in-vestigated by X-ray di raction, Fourier transform infrared spectra, scanning electron mi-croscope, charge/discharge tests, and electrochemical impedance spectroscopy, respectively. The results indicated that the V and F co-doping did not destroy the olivine structure of LiFePO₄/C, but it can stabilize the crystal structure, decrease charge transfer resistance, enhance Li ion di usion velocity, further improve its cycling and high-rate capabilities of LiFePO₄/C.     

Real‐time reaction monitoring by probe electrospray ionization mass spectrometry

Probe electrospray ionization (PESI) is a modified version of the electrospray ionization (ESI), where the capillary for sampling and spraying is replaced by a solid needle. High tolerance to salts and direct ambient sampling are major advantages of PESI compared with conventional ESI. In this study, PESI‐MS was used to monitor some biological and chemical reactions in real‐time, such as acid‐induced protein denaturation, hydrogen/deuterium exchange (HDX) of peptides, and Schiff base formation. By using PESI‐MS, time‐resolved mass spectra and ion chromatograms can be obtained reproducibly. Real‐time PESI‐MS monitoring can give direct and detailed information on each chemical species taking part in reactions, and this is valuable for a better understanding of the whole reaction process and for the optimization of reaction parameters. PESI‐MS can be considered as a potential tool for real‐time reaction monitoring due to its simplicity in instrumental setup, direct sampling with minimum sample preparation and low sample consumption. Copyright © 2010 John Wiley & Sons, Ltd.     

磁性三维氮掺杂碳纳米材料对6种双酚类化合物的吸附性能及其在泡腾分散微萃取中的应用

采用简单高温煅烧法成功制备了磁性钴镍基氮掺杂三维碳纳米管与石墨烯复合材料(CoNi@NGC),将其作为吸附剂用于水体中6种双酚类化合物(BPs)的吸附性能和机理研究。将CoNi@NGC复合纳米材料用作萃取介质,运用酸碱泡腾片的CO₂强力分散作用,开发了泡腾反应强化的分散固相微萃取前处理方法,结合高效液相色谱-荧光检测(HPLC-FLD)快速定量饮料中痕量BPs。采用扫描电镜、透射电镜、傅里叶红外光谱、氮气吸脱附、X射线光电子能谱和磁滞回线等技术手段对材料形貌结构进行表征,结果显示:该吸附剂成功实现氮元素的掺杂,且具有较大的比表面积(109.42 m²/g)、丰富的孔径及较强的磁性(17.98 emu/g)。吸附剂投加量、pH、温度、时间等因子优化试验表明:当pH=7,在初始质量浓度为5 mg/L的BPs混合溶液中投加5 mg CoNi@NGC, 298 K反应5 min,对双酚M(BPM)、双酚A(BPA)的吸附率分别高达99.01%和98.21%。作用90 min时对双酚Z(BPZ)、BPA、BPM的吸附率近100%。在吸附过程中,BPs与CoNi@NGC之间的整个吸附过程主要受氢键、静电作用和π-π共轭作用共同控制。整个吸附过程符合Freundlich吸附等温线模型和准二级动力学方程,吸附自发进行。进一步将CoNi@NGC作为萃取介质制备成磁性泡腾片,利用泡腾分散微萃取技术高效富集和提取6种盒装饮料中的BPs,优化了影响富集效果的泡腾片的存在与否、洗脱剂种类、洗脱时间、洗脱体积等关键因子,在最佳萃取条件下(pH=7,投加5 mg CoNi@NGC, 2 mL丙酮洗脱6 min),结合HPLC-FLD,新开发的泡腾分散微萃取方法提供的检出限为0.06~0.20 μg/L,定量限为0.20~0.66 μg/L,日内和日间精密度分别为1.44%~4.76%和1.69%~5.36%,在实际样品中不同水平下的加标回收率为82.4%~103.7%,在桃汁中检测到BPA和双酚B(BPB)分别为2.09 μg/L和1.37 μg/L。再生试验表明该吸附材料至少可以重复使用5次以上,显著降低了分析的试验成本。与其他方法相比,该方法具有灵敏度高、萃取速度快、环境友好等优点,在常规食品污染监测中具有较强的应用价值。     

纤维素及其衍生物催化脱氧转化制化学品

纤维素是木质纤维素生物质中最为丰富的组分,将其催化转化制备高附加值化学品在生物质资源化利用中占据极为重要的一席之地。由于纤维素中氧含量过高,需选择性地脱除部分氧原子才可获得满足当前化学工业对各类高值化学品的要求。近年来,针对纤维素以及由其衍生的关键平台分子葡萄糖和5-羟甲基糠醛(HMF)等催化脱氧的研究已引起广泛关注,并取得诸多重要进展。在此,我们总结了具有代表性的多相催化剂体系,讨论了利用氢解或脱水脱氧策略分别将纤维素和葡萄糖等分子中一个或多个C―O键裁剪制备乙醇、烯烃或己二酸等的研究。我们还着重介绍了HMF和其衍生的呋喃化合物选择性剪切C―OH/C＝O键或呋喃环中的C―O―C键分别制备二甲基呋喃和1, 6-己二醇等催化体系。此外,对各多相催化剂的作用机制和特定C―O断键机理也分别进行了探讨,以期深入理解纤维素及其衍生物的催化脱氧反应。     

Effects of Thieno[3,2-b]thiophene Number on Narrow-Bandgap Fused-Ring Electron Acceptors

Chinese Journal of Polymer Science - We synthesize and compare four near-infrared absorbing fused-ring electron acceptors named as nTTIC (n=2, 3, 4, and 5), based on different number of...     

Establishment and validation of an SIL-IS LC–MS/MS method for the determination of ibuprofen in human plasma and its pharmacokinetic study

In this work, we developed and validated a highly sensitive, rapid and stable LC–MS/MS method for the determination of ibuprofen in human plasma with ibuprofen-d3 as a stable isotopically labeled internal standard (SIL-IS). Human plasma samples were prepared by one-step protein precipitation. The chromatographic separation was achieved on a Poroshell 120 EC-C₁₈ (2.1 × 50 mm, 2.7 μm). Aqueous solution (containing 0.05% acetic acid and 5 mm NH₄Ac) and methanol were selected as the mobile phase with gradient elution. An electrospray ionization source was applied and operated in negative ion mode. Multiple reaction monitoring mode was used for quantification using target fragment ions m/z 205.0 → 161.1 for ibuprofen and m/z 208.0 → 164.0 for SIL-IS, respectively. This method exhibited a linear range of 0.05–36 μg/ml for ibuprofen with correlation coefficient >0.99. Mean recoveries of ibuprofen in human plasma ranged from 78.4 to 80.9%. The RSD of intra- and inter-day precision were both < 5%. The accuracy was between 88.2 and 103.67%. The matrix effect was negligible in human plasma, including lipidemia and hemolytic plasma. A simple, efficient and accurate LC–MS/MS method was successfully established and applied to a pharmacokinetic study in healthy Chinese volunteers after a single oral administration of ibuprofen granules.     

等级孔微孔-介孔Fe2O3/ZSM-5中空分子筛催化材料的制备及催化苄基化性能

ZSM-5分子筛具有极其均匀的孔道结构、 良好的形状选择性和催化活性及耐水热稳定性, 是一种高效、 绿色的固体催化剂, 被广泛应用于石油催化裂化、 精细化工和环境保护等领域. 但其单一的微孔结构大大降低了客体分子的流通扩散性, 导致由大分子参与的芳烃烷基化反应受到极大限制. 本文采用NaOH/四丙基氢氧化铵(TPAOH)混合碱处理微孔ZSM-5, 制备了具备高结晶度、 高比表面积的等级孔微孔-介孔ZSM-5中空分子筛材料, 该材料在保持微孔孔道良好水热稳定性和大量活性中心的同时, 还通过介孔的引入进一步促进反应物及产物的扩散, 使间三甲苯苄基化反应的转化率提高了3.8倍. 通过在等级孔微孔-介孔ZSM-5中空材料上负载Fe, 开发出了具有双功能的等级孔微孔-介孔Fe₂O₃/ZSM-5中空催化剂, 该催化剂在苯的苄基化反应中表现出优异的催化性能, 当Fe负载量(质量分数)为6.67%, 反应温度为75 ℃, 反应时间为15 min时, 转化率高达98.3%, 选择性为81.6%, 最终收率达到80.2%.     

Transition Metal Doping Induces Ti3+ to Promote the Performance of SrTiO3@TiO2 Visible Light Photocatalytic Reduction of CO2 to Prepare C1 Product.

Transition metal Fe, Co, Ni and Cu doped strontium titanate-rich SrTiO₃@TiO₂ (STO@T) materials were prepared by hydrothermal method. The prepared doped materials exhibit better photocatalytic CO₂ reduction to CH₄ ability under visible light conditions. Among them, Fe-doped and undoped SrTiO₃@TiO₂ under visible light conditions CO₂ reduction products only CO, while M-STO@T (M=Co, Ni, Cu) samples converted CO₂ to CH₄. The average methane yield of Ni-doped STO@T samples are as high as 73.85 μmol g⁻¹ h⁻¹. The production of methane is mainly due to the increase in the response of the doped samples to visible light. And the increase in the separation rate of photogenerated electrons and holes and the efficiency of electron transport caused by the generation of impurity levels. The impurity level caused by Ti³⁺ plays an important role in the production of methane by CO₂ visible light reduction. Ni doping effectively improves the photocatalytic performance of STO@T and CO₂ reduction mechanism were explained.     

吉林大学化学学科国际化人才培养模式的探索与实践

吉林大学化学学科作为国家“双一流”建设学科,始终将一流人才的培养作为不懈追求发展的根本目标。充分利用海外优质教育资源,建设与实施多元化、特色化的海外优质课程和国际交流项目,通过搭建外延式实践平台,支持能力阶梯式增长,为培养具有创新意识、实践能力、国际竞争力和家国情怀的高素质人才构建了多层次、国际化的创新人才培养模式,培养了大批化学领域的杰出人才。