Rapid determination of underivatized pyroglutamic acid, glutamic acid, glutamine and other relevant amino acids in fermentation media by LC-MS-MS

Determination of amino acids in a complex matrix without derivatization is advantageous, however, difficulties are found in both the detection and the separation of those compounds. In this study, a rapid and reliable LC-MS-MS method for the quantitation of underivatized amino acids in exocellular media was established. Injections were made directly after centrifugation of the samples, without further preparation. The separation of seven underivatized amino acids was achieved on a reversed-phase C18 column with pentadecafluorooctanoic acid as a volatile ion-pair reagent, and the specific detection of most amino acids was achieved by MS-MS of the specific transitions [M + H]+-->[M + H - 46]+. The calibration curves of all analytes were linear over the range of 1.0-1000 microg ml(-1) and the detection limits ranged from 0.1 to 5 ng ml(-1), with an injection volume of 20 microl. The inter-day and intra-day precisions ranged from 2.6 to 5.7% and 4.8 to 8.2%, respectively; the mean recoveries of the seven analytes were 81-104%, 91-107% and 93-101% respectively at the spiked level of 10, 40 and 200 microg ml(-1). A large number of fermentation samples were analysed using this method. The technique is simple, rapid, selective and sensitive, and shows potential for the high-throughput quantitation of amino acids from other biological matrices.     

Simplified Labeling Approach for Synthesizing 3′-Deoxy-3′-[18F]fluorothymidine ([18F]FLT)

[¹⁸F]FLT (3-deoxy-3-[¹⁸F]fluorothymidine) turned out to be a tracer particularly suitable for PET imaging of tumor proliferation because of lacking degradation in vivo. To facilitate clinical studies with [¹⁸F]FLT, we investigated two new easily accessible precursors, 2,3-anhydrothymidine (AThy) and 5-O-(4,4-dimethoxytriphenylmethyl)-2,3-anhydrothymidine (DMTThy), using a common approach for introducing the label with nucleophilic [¹⁸F]fluoride. Radiochemical yields were determined in dependence on substrate concentration, reaction time and temperature. In the case of AThy (10 mg), best FLT yields were 5.3%±1.2 (130 °C, 30 min). Labeling of DMTThy (10 mg) gave 14.3%±3.3 at 160 °C within 10 minutes. Starting with an aqueous solution of 20 GBq [¹⁸F]fluoride the new method allows to produce 1.3 GBq [¹⁸F]FLT within 90 minutes ready for intravenous injection. The new labeling procedures allow [¹⁸F]FLT synthesis without lengthy preparation of the precursor and with high reproducibility mandatory for clinical application.     

Stereochemical analysis of isopentenyl diphosphate isomerase type II from Staphylococcus aureus using chemically synthesized (S)- and (R)-[2-2H]isopentenyl diphosphates

[chemical reaction: see text]. To study the catalysis of isopentenyl diphosphate (IPP) isomerase type II from Staphylococcus aureus, which is a flavoprotein catalyzing the interconversion of IPP and dimethylallyl diphosphate, we have chemically synthesized (S)- and (R)-[2-2H]IPP and carried out stereochemical analysis of the reaction. Our results show that the C-2 deprotonation of IPP by this enzyme is pro-R stereospecific, suggesting a similar stereochemical course as the type I enzyme.     

Luminescent heteronuclear Au(I)5Ag(I)8 complexes of [1,2,3-C6(C6H4R-4)3]3- (R = H, CH3, But) by cyclotrimerization of arylacetylides

Unusual AuI-AgI heterometallic complexes [Au5Ag8(mu-dppm)4{1,2,3-C6(C6H4R-4)3}(CCC6H4R-4)7]3+ (R = H 1, CH3 2, But 3) were isolated by reactions of polymeric silver arylacetylides (AgCCC6H4R-4)n with binuclear gold component [Au2(mu-dppm)2(MeCN)2]2+ (dppm = bis(diphenylphosphino)methane), in which cyclotrimerization of arylacetylide -CCC6H4R-4 affords trianion {1,2,3-C6(C6H4R-4)3}3- with an unprecedented mu5-bonding mode. Compounds 1(SbF6)3-3(SbF6)3 exhibit intense photoluminescence derived from an MLCT (Au5Ag8 --> CCC6H4R-4) transition, mixed with a metal cluster-centered excited states.     

Mass resolved MPI spectra of methyl iodide in the 430-490 nm region

The mass resolved multiphoton ionization (MPI) spectra of methyl iodide were obtained in the 430-490 nm region using a time-of-flight (TOF) mass spectrometer. They have the same vibrational structure, which testifies that the fragment species, in the wavelength region under study, are from the photodissociation of multiphoton ionized molecular parent ions. Some features in the spectra are identified as three-photon excitations to 6p and 7s Rydberg states of methyl iodide. Two new vibrational structures of some Rydberg states are observed. The mechanism of ionization and dissociation is also discussed.     

Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

Butterfly and Nest-Shaped Tp*-W-Cu-S Cluster Monomers and Dimers with Hexamethylenetetramine as Ligand: Anion-Dependent Structures and Nonlinear Optical Properties

The assembly of[Et4N][Tp*WS3](1) with CuX (Tp* =hydridotris(3,5-dimethylpyrazol-1-yl)borate;X =Cl,Br,and I) or[Cu(MeCN)4][PF6]in the presence of tetratopic liga...     

水体透射光谱结合主成分分析(PCA )改进化学需氧量(COD)含量估算研究

化学需氧量（Chemical Oxygen Demand,COD）是水体有机污染的一项重要指标,化学需氧量越高,表示水污染程度越严重。 为了解决传统的COD测量方法耗时较长,不利于快速、实时地获取水体中COD的信息等问题。本文提出了基于透射光谱测量结合主成分分析(Principal Component Analysis, PCA)改进水体COD含量估算模型。具体的,采集100组COD水体光谱信息,分别使用3种不同的高光谱数据预处理方法对光谱数据进行预处理,分析不同预处理方法对模型精度的影响,并基于不同的预处理方法分别建立高斯过程回归模型(Gaussian Process Regression, GPR)和BP神经网络模型,分析不同预处理方法对模型精度的影响;并对各模型结合PCA数据降维方法进行模型的改进,通过比较模型的精度选择最优模型进行水体COD含量的检测。结果显示,相比于原始光谱数据建立的GPR模型和BP神经网络模型,数据预处理后的模型精度明显提升;且结合PCA对预处理后的数据进一步降维处理后,模型精度得到了进一步的提升。其中,基于标准正态变量变换特征结合PCA改进BP神经网络模型基于PCA改进的BP神经网络模型R^2高达0.9940,均方根误差RMSE为0.022540。证明了基于PCA改进的BP神经网络数据降维方法对预处理后的光谱数据进行降维处理,有利于去除光谱中的冗余信息,提取特征信息,可以实现高光谱检测方法可以实现COD含量估算模型的优化,从而为传统COD测量方法存在的问题提出了一种新的解决思路。     

Visible Light-Driven Alkyne-Grafted Ethylene-Bridged Azobenzene Chromophores for Photothermal Utilization

Molecular photoswitches are considered to be important candidates in the field of solar energy storage due to their sensitive and reversible bidirectional optical response. Nevertheless, it is still a daunting challenge to design a molecular photoswitch to improve the low solar spectrum utilization and quantum yields while achieving charging and discharging of heat without solvent assistance. Herein, a series of visible-light-driven ethylene-bridged azobenzene (b-Azo) chromophores with different alkyne substituents which can undergo isomerization reactions promoted in both directions by visible light are reported. Their visible light responsiveness improves their solar spectrum utilization while also having high quantum yields. In addition, as the compounds are liquids, there is no need to dissolve the compounds in order to exploit this switching. The photoisomerization of b-Azo can be adjusted by alkyne-related substituents, and hexyne-substituted b-Azo is able to store and release photothermal energy with a high density of 106.1 J·g⁻¹, and can achieve a temperature increase of 1.8 °C at a low temperature of −1 °C.