Annealing behavior of gel‐spun polyethylene fibers at temperatures lower than needed for significant shrinkage

The annealing at 373 K of ultrastrong, gel‐spun polyethylene (PE) has been studied. At this temperature, the fibers show no significant shrinkage. Still, a significant decrease in the mechanical properties is observed. The fibers have been analyzed with differential scanning calorimetry (DSC), temperature‐modulated differential scanning calorimetry (TMDSC), atomic force microscopy (AFM), and small‐angle X‐ray scattering (SAXS). During the annealing, the glass transition of the intermediate phase is exceeded, as shown by DSC. When split for structure analysis by AFM, the annealed fibers undergo plastic deformation around the base fibrils instead of brittle fracture. The quasi‐isothermal TMDSC experiments are compared to the minor structural changes seen with SAXS and AFM. The loss of performance of the PE fibers at 373 K is suggested to be caused by the oriented intermediate phase, and not by major changes in the structure or morphology. The overall metastable, semicrystalline structure is shown by TMDSC to posses local regions that can melt reversibly. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 403–417, 2003     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

Kinetic behaviour of aluminum naphthenate/benzene system in process of gelation and degradation

The kinetic behaviour of aluminum naphthenate/benzene system in the process of gelation and degradation was systematically studied. The results obtained from the kinetic experiments indicated that the gelation stage was in accordance with a kinetic model of an auto-catalytic first-order reaction, and the degradation stage was a simple first-order reaction. The rate constants in these two stages at various temperaturs were measured. And the determined apparent activation energies for the gelation stage and for the degradation stage are 27.5±2.0 and 37.7±2.3 kJ/mol, respectively.     

Numerical analysis for the periodic response of nonsmooth dynamic systems of high-dimension

This paper deals with the numerical solution of high dimensional dynamic systems with nonsmooth characteristics, such as structural elastoplasticity, mechanical clearance and dry friction. As a stable periodic response of the system attracts its transient response, it may be extracted from the transient response somehow. The paper suggests a novel iteration scheme to extrapolate the periodic response from a short time history of its transient response by curve fitting. Compared with the current schemes such as shooting and incremental harmonic balancing, the present scheme makes full use of the information within the transient response and the system characters, then its computation efficiency has increased by an order and the numerical convergence depending on the initial iteration has greatly improved.The subject supported by the Chinese Foundation of Aeronautical Science     

Temperature dependence of magnetization in nanocrystalline FeCoZr alloy

The temperature dependence of magnetization of a nanocrystalline Fe₆₀Co₃₀Zr₁₀ alloy annealed at various temperatures to varying crystal sizes was investigated down to 5 K in the field range up to 5 T. The fitting procedure gave T^3/2 as the leading term irrespective of the crystal size. We suggest that the increase of the coefficient by this term for smaller crystals may be connected to an increased relative volume of their surface.     

Synthesis and transition temperatures of liquid crystals incorporating a 1,4-tetrafluorophenylene unit

Two homologous series of mesogenic materials which incorporate a 1,4-tetrafluorophenylene moiety and a terminal cyano- or nitro-substituent have been synthesized by using palladiumcatalysed coupling procedures. The compounds exhibit nematic and/or smectic A phases.     

Identification of peroxyacetic acid uroporphyrin I in the urine of patients with congenital erythropoietic porphyria by liquid chromatography and mass spectrometry

A new porphyrin, peroxyacetic acid uroporphyrin I, has been isolated from the urine of patients with congenital erythropoietic porphyria by reversed phase high performance liquid chromatography. The porphyrin was characterized by high resolution mass spectrometry and by typical chemical reactions of a peroxyacid.     

Low-energy ion-assisted control of interfacial structures in metallic multilayers

A molecular dynamics method has been used to simulate the argon ion-assisted deposition of Cu/Co/Cu multilayers and to explore ion beam assistance strategies that can be used during or after the growth of each layer to control interfacial structures. A low-argon ion energy of 5–10 eV was found to minimize a combination of interfacial roughness and interlayer mixing (alloying) during the ion-assisted deposition of multilayers. However, complete flattening with simultaneous ion assistance could not be achieved without some mixing between the layers when a constant ion energy approach was used. It was found that multilayers with lower interfacial roughness and intermixing could be grown either by modulating the ion energy during the growth of each metal layer or by utilizing ion assistance only after the completion of each layers deposition. In these latter approaches, relatively high-energy ions could be used since the interface is buried and less susceptible to intermixing. The interlayer mixing dependence upon the thickness of the over layer has been determined as a function of ion energy.