Quadratic nonlinear response to 1.56-μm continuous wave laser in semi-insulating GaAs

The nonlinear photoresponse to a 1.56μm infrared continuous wave laser in semi-insulating （SI） galliu- marsenide （GaAs） is examined. The double-frequency absorption （DFA） is responsible for the nonlinear photoresponse based on the quadratic dependence of the photocurrent separately on the coupled optical power and bias voltage. The electric field-induced DFA remarkably affects the native DFA in SI GaAs. The surface electric field or the surface band-bending of SI GaAs significantly affects the magnitude variation of the Dhotocurrent and dark current     

非晶硅界面缓冲层对非晶硅锗电池性能的影响

针对非晶硅锗电池本征层高锗含量时界面带隙失配以及高界面缺陷密度造成电池开路电压和填充因子下降的问题,通过在PI界面插入具有合适带隙的非晶硅缓冲层,不仅有效缓和了带隙失配,降低界面复合,同时也通过降低界面缺陷密度改善内建电场分布,从而提高了电池的收集效率. 进一步引入IN界面缓冲层以及对非晶硅锗本征层进行能带梯度设计,在仅采用Al背电极时,单结非晶硅锗电池转换效率达8.72%. 关键词： 非晶硅缓冲层 非晶硅锗薄膜太阳电池 带隙 界面     

更正:质子束治疗中非均匀组织的等效水厚度修正研究[物理学报2013,62,068701]

《物理学报》2013年第62卷第6期第068701页《质子束治疗中非均匀组织的等效水厚度修正研究》一文中,因作者疏忽导致几处错误,特此更正,并诚挚地向读者致歉.期刊网上此文的电子版已做相应的更正.将3.1节中三个公式做如下更正:将(1)式:"WET=R介质/R水×b"改成:"WET=R水/R介质×b"将(2)式:"WET=R1/R水×d1+R2/R水×d2+···+Rn/R水×dn"改成:"WET=R水/R1×d1+R水/R2×d2+···+R水/Rn×dn"     

高氧空位浓度对金红石TiO2导电性能影响的第一性原理研究

采用基于密度泛函理论的平面波超软赝势方法研究了 纯的和不同高氧空位浓度金红石型TiO_2-x (x=0, 0.083, 0.125, 0.167, 0.25)超胞的能带结构分布、态密度分布.同时, 采用局域密度近似+U方法调准了带隙.结果表明, 高氧空位浓度越高, 金红石型TiO₂的最小带隙越变窄、电子有效质量越减小, 自由电子浓度越高, 电子迁移率越低、电导率越低.计算结果与实验结果的变化趋势相符合. 关键词： 高氧空位 2')" href="#">金红石型TiO₂ 电导率 第一性原理     

Working group report: Flavor physics and model building

This is the report of flavor physics and model building working group at WHEPP-9. While activites in flavor physics have been mainly focused on B-physics, those in model building have been primarily devoted to neutrino physics. We present summary of working group discussions carried out during the workshop in the above fields, and also briefly review the progress made in some projects subsequently.     

New physics hints in B decays and collider outlook

There are currently two hints for new physics involving CP violation in b → s transitions: ΔS ≡ S _f − S _J ^ϕK ≠ 0, and difference in direct CP asymmetry ΔA _Kπ ≡ A _K+π ⁰ − A _K+π ⁻ ≠ 0. We explore the two scenarios with a large and unique new CP phase in b ↔ s transitions. Motivated by ΔS ≠ 0, we update on the right-handed strange-beauty squark sb _1R at TeV scale. Motivated by ΔA _Kπ ≠ 0, we explore sequential fourth generation t′ and b′ quarks. Both scenarios can survive constraints such as SM level b → sγ, sll and B _s mixing, and predict sizable CP violation in B _s mixing. The fourth generation picture predicts sizable K _L → π ⁰ vv. Direct search for sb _R, b′ and t′ at hadronic colliders, such as Tevatron Run II and LHC, can complement further CP violation studies at these machines, as well as at the future Super B factory.     

4.44 W of CW 515 nm green light generated by intracavity frequency doubling Yb:YAG thin disk laser with LBO

We demonstrate the generation of 515 nm green laser with diode-pumped Yb:YAG thin disk by intracavity frequency doubling of type-I phase-matched LiB₃O₅(LBO) in a V-type cavity at room temperature. A continuous-wave (CW) output power of 4.44 W at 515 nm was obtained. Optical-optical efficiency of 515 nm green laser is 14.6%. The fluctuation of green laser was 1.6% at the maximum output power in 0.5 h. Thermal lensing effects in Yb:YAG thin disk are investigated too.     

基于模糊PID的助行机器人调速系统的研究

助行机器人对系统的动态特性要求较高,而且在其爬楼的过程中有诸多不确定的因素,基于传统控制策略的单闭环负反馈控制系统调速效果难以令人满意。在这种情况下建立了系统的数学模型,设计了基于模糊PID的双闭环调速控制系统,并和传统的PID控制进行了对比。为了保证助行机器人爬楼过程的平稳性和乘坐者的舒适性,参考电梯运行的速度曲线,设计了正弦速度给定曲线。仿真结果表明：在助行机器人调速系统中,模糊PID控制比传统PID控制启动和制动过程更平稳,舒适性更高,误差更小,精度更高。     

近景大视场角分区域标定方法研究

针对飞行试验测量视场大相机标定精度低的问题,提出一种高精度CCD相机分区域标定方法。该方法首先通过将标靶均匀布置在摄像机视场内,使得标靶尽可能均匀错落地充满整个视场范围,再结合人眼判读的方式求解靶标的像面位置,最终与全站仪三维坐标形成精确的空间标定点集。接着,将像平面按横向方向等间距分割成Ｎ个区域,并结合后方交会的方法分别对每个子区域进行相机参数的计算。实验结果表明：经过分区域标定,相机采集点的总误差比单区域标定法降低了4％(Ｎ＝3)。算法可实现指定区域的相机参数计算,基本满足中高等精度的工业测量要求。所本文研究可应用于位置相对固定不变的工业视觉测量,特别是大工件测量领域。