Polymeric catalyst for the synthesis of new pyrido[2,3-b]indoles

A new and efficient method has been developed for the one-pot synthesis of novel 2,9-dihydro-2-oxo-4-aryl-1H-pyrido[2,3-b]indole-3-carbonitrile derivatives by condensation of substituted (triethoxymethyl)arene, 1-methyl-1H-indol-2-ol and cyanoacetamide in the presence of a catalytic amount of crosslinked poly(2-acrylamido-2-methyl propane sulfonic acid) (AMPS) as an efficient and heterogeneous catalyst. This polymeric solid acid catalyst is stable and can be easily recovered and reused without significant change in its activity.     

Theoretical studies on tautomerism of imidazole-2-selenone

The tautomerism of all possible forms of imidazole selenone (ISe1–ISe6), induced by proton transfer was studied theoretically in different environments including gas phase, continuum solvent, and microhydrated environment with one explicit water molecule. The calculations were performed at the MP2 and CAM-B3LYP levels of theory, separately. It was found that the imidazole selenone, in the form of ISe3, is the most stable isomer in both gas phase and solvent. The activation energy for conversion of ISe3 to imidazole selenol (ISe6), as the second stable form, is 41.72 and 43.0 kcal/mol in the gas phase and water, respectively. The infrared spectral frequencies as well as the vibrational frequency shifts were reported and assigned to their corresponding vibrational modes. In addition, the variation of dipole moments and charges on the atoms with change of solvent was studied. The energies of HOMO, LUMO, and HOMO–LUMO gap were calculated in both gas phase and solvent. Specific solvent effects with addition of water molecule near the electrophilic centers of tautomers and the transition states of proton transfer, assisted by water molecule, were investigated. It was found that the water molecule can form different hydrogen bonds with the molecule. Aggregation of the isomers with water molecule does not change the order of stability of isomers, but proton transfer reaction assisted by a water molecule needs less energy than when the proton shifts through the intramolecular process.     

Structure and properties of NR/BR blend/clay nanocomposites prepared by the latex method

Rubber blend/clay nanocomposites based on the 50/50 (wt %) natural rubber/butadiene rubber was prepared by the latex method via mixing the latex of 50/50 NR/BR blend with different amounts of the aqueous sodium montmorillonite (Na-MMT) dispersion and co-coagulating the mixture. XRD and TEM were used to characterize structure of the nanocomposites. It was found that fully exfoliated structure could be obtained by this method only when the low loading of layered silicate (up to 5 phr) is used. With increasing the clay content, both non-exfoliated (stacked layers) and exfoliated structures can be observed simultaneously in the nanocomposites. Nanocomposites showed mechanical properties better than the clay-free volcanizate. Moreover, modulus, tensile strength, elongation at break and tear strength increased significantly by increasing the clay amount up to 5 phr and then remained almost constant by further increasing the clay content. Improvement in the mechanical properties by increasing the clay loading up to 5 phr was attributed to the nano-reinforcement effect of Na-MMT. TGA results indicated an improvement in the main decomposition temperature by increasing the clay amount.     

The Use of Laser Induced Breakdown Spectroscopy (LIBS) to Study Catalyst Deactivation of V2O5/γ‐Al2O3 as Compared to Inductively Coupled Plasma Optical Emission Spectrometry

Laser Induced Breakdown Spectroscopy (LIBS) method is introduced as a novel approach in this work to study catalyst deactivation of V₂O₅/γ‐‐Al₂O₃ for gas‐phase dehydration of glycerol and producing acrolein. The LIBS results of V₂O₅/γ‐Al₂O₃ samples are compared with those data that are obtained by Inductively Coupled Plasma Optical Emission Spectrometry (ICP‐OES). Experimental data of LIBS data specify that line intensities of vanadium are decreased by deactivation of V₂O₅/γ‐Al₂O₃ catalyst. A comparison between the results of LIBS test as well as ICP‐OES analysis shows that the amount of vanadium is decreased in the catalyst. Moreover, coke formation changes the surface of the catalyst. The results of deactivation of V₂O₅/γ‐Al₂O₃ are also compared with Pd/C catalyst deactivation.     

Air‐assisted liquid–liquid extraction coupled with dispersive liquid–liquid microextraction and a drying step for extraction and preconcentration of some phthalate esters from edible oils prior to their determination by GC

In this work, a new, cheap, simple, fast, and low organic solvent consuming procedure is proposed for isolation, enrichment, and gas chromatographic determination of some phthalate esters in edible oils. The method is based on a combination of air‐assisted liquid–liquid extraction and dispersive liquid–liquid microextraction followed by a drying step under N₂ gas. Several experimental parameters affecting both extraction and preconcentration steps were investigated and optimized. Under the optimum conditions for the proposed method, wide linear ranges (0.05–800 μg/L) and low detection limits (0.007–0.023 μg/L) were observed. The ranges of enrichment factors and extraction recoveries were 68–340 and 14–68%, respectively. Eventually, the target analytes were successfully determined in different edible oils using the proposed method.     

Synthesis,characterization and theoretical evaluations of HMDS promoted chemoselective O-alkylation of uracils

The sodium salts of the conjugated bases of uracils undergo highly chemoselective O⁴-monoalkylation when treated with various alkyl halides in dry DMF, while the use of methyl iodide results in N¹+N³-dimethylation. Theoretical evaluations of the chemo- and regioselectivity along with X-ray crystallographic data are presented.     

Synthesize,Characterization and Application of Phosphine‐free Polymer Supported Palladium Nanoparticles as Effective Catalyst in Suzuki‐Miyaura Cross‐coupling Reactions

Heterogeneous catalysts were developed by supporting palladium nanoparticles on modified cross‐linked polyacrylamide and successfully applied in Suzuki‐Miyaura cross‐coupling reactions. These catalysts are stable to air and moisture, and no sign of metal leaching was detected during the reactions as judged by elemental analysis of palladium by ICP‐OES technique and hot filtration test, which demonstrates the heterogeneous character of the catalysts. High yields of desired products were resulted by using these phosphine‐free catalysts at temperatures below 80 °C without aid of any additional ligands. The heat stability of the catalysts at the operating temperature was confirmed by thermogravimetric analysis (TGA). These catalysts are easy to use and cost effective. They can be recovered from reaction mixture by a simple filtration and reused in more successive reactions without significant loss in activity. The catalyst activity was restored by an ultrasonication program after deactivation in 10 cycles.     

Synthesis and microstructural study of stereoblock elastomeric polypropylenes from metallocene catalyst (2‐PhInd)2ZrCl2 activated with cocatalyst mixtures

Various elastomeric polypropylenes (PPs) are synthesized through homogeneous propylene polymerization with metallocene catalyst (2‐PhInd)₂ZrCl₂ in the presence of different cocatalyst mixtures: triethylaluminum (TEA)/methylaluminoxane (MAO) or triisobutylaluminum (TIBA)/MAO in the range of Al_AlR3/Al_MAO = 0.0–0.9. The cocatalyst formulation impacts the resultant polymer microstructure and the thermal and dynamic mechanical properties of the produced PPs. ¹³C NMR analysis of the polymers reveals essentially atactic PP, with mmmm = 7.9%, when Al_AlR3/Al_MAO = 0.0. The mmmm pentad content is maximized when Al_AlR3/Al_MAO = 0.8; for TIBA, mmmm = 23.5%; and for TEA, mmmm = 17.6%. Differential scanning calorimetry analysis and dynamic mechanical thermal analysis corroborate these findings. Specifically, T_m, ΔH_m, and T_g are essentially maximized under these conditions, and the minimum damping is observed for Al_AlR3/Al_MAO = 0.6–0.8. ¹H NMR analysis of the mixtures of catalyst and cocatalysts (without monomer) shows very minor differences for [Zr]:Al_AlR3 in the range of 1:1–1:5. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013