Designed Beta‐Turn Mimic Based on the Allylic‐Strain Concept: Evaluation of Structural and Biological Features by Incorporation into a Cyclic RGD Peptide (Cyclo(‐L‐arginylglycyl‐L‐α‐aspartyl‐))

The (3R,5S,6E,8S,10R)‐11‐amino‐3,5,8,10‐tetramethylundec‐6‐enoic acid (ATUA; 1 ), which was designed as a βII′‐turn mimic according to the concepts of allylic strain and 2,4‐dimethylpentane units, was incorporated into a cyclic RGD peptide. The three‐dimensional structure of cyclo(‐RGD‐ATUA‐) (=cyclo(‐Arg‐Gly‐Asp‐ATUA‐)) 4 in H₂O was determined by NMR techniques, distance geometry calculations and molecular‐dynamics simulations. The RGD sequence of 4 shows high conformational flexibility but some preference for an extended conformation. The structural features of the RGD sequence of 4 were compared with the RGD moiety of cyclo(‐RGDfV‐) (=cyclo(‐Arg‐Gly‐Asp‐D ‐Phe‐Val‐)). In contrast to cyclo(‐RGDfV‐), which is a highly active αvβ3 antagonist and selective against αIIbβ3, cyclo(‐RGD‐ATUA‐) shows a lower activity and selectivity. The structure of the ATUA residue in the cyclic peptide resembles a βII′‐turn‐like conformation. Its middle part, adjacent to the C?C bond, strongly prefers the designed and desired structure.     

CdSe and CdSe/CdS nanorod solids

We demonstrate the self-organization of CdSe nanorods into nematic, smectic, and crystalline solids. Layered colloidal crystals of CdSe nanorods grow by slow destabilization of a nanocrystal solution upon allowing the diffusion of a nonsolvent into the colloidal solution of nanocrystals. The colloidal crystals of nanorods show characteristic birefringence, which we assign to specific spherulite-like texture of each nanorod assembly. To demonstrate the general character of nanorod self-assembly technique, CdSe/CdS heterostructure nanorods were organized into highly luminescent superlattices.     

Optical properties of bis(cyclopentadienyl)magnesium: excimer-type luminescence of the bis(cyclopentadienyl) ligand frame

The electronic spectra of solid MgCp₂ (Cp = cyclopentadienyl) show features which indicate the presence of intramolecular interligand interactions. The fluorescence of MgCp₂ (λ_max = 363 nm) undergoes a considerable Stokes shift which is apparently caused by a bonding attraction between both Cp rings in the excited state. An additional phosphorescence of the (Cp⁻)₂ fragment (λ_max = 535 nm) appears at 77 K.     

The amperometric detection of thyroid hormones following reverse-phase high-performance liquid chromatography

The principle of an assay of the major thyroid hormones by an electrochemical technique is demonstrated. The separation of 3,3',5-triiodothyronine, 3,3',5'-triiodothyronine, and thyroxine, by reverse-phase high-performance liquid chromatography is followed by their electrochemical oxidation in a thin-layer electrochemical detection cell with a low-temperature isotropic carbon working electrode. The limits of detection found were in the subnanogram range with linear response in the ranges 0–125 ng for T₃ and 0–500 ng for T₄. The approach makes the simultaneous assay of total serum thyroid hormones feasible.     

Selektivierung geringer Mengen Kupfer mit Polyäthylenimin-Zellulose

Zusammenfassung Polyäthyleniminzellulosen sorbieren Cu²⁺ durch koordinative Bindung als Zentralion des sekundären Stickstoffs des Polyäthylenimins im P_H-Bereich 3,5 bis 4,5 selektiv aus verd. Lösungen. 10g Kupfer können von 10⁵fachen Überschüssen anderer Übergangsmetalle separiert, mit verd. Salzsäure eluiert und mit Diäthyldithiocarbamat photometrisch bestimmt werden. Das Verfahren eignet sich zur Erfassung von 0,001% Kupfer in Zink, Mangan, Kobalt, Nickel, Cadmium und Aluminium sowie aus Lösungen, deren Kupfergehalt 0,02 ppm beträgt.

---

Selectivation of small amounts of copper with polyethyleneimine-cellulose

Summary Polyethyleneimine celluloses selectively sorb Cu²⁺ from dilute solutions through coordinative bonding as central ion of the secondary nitrogen of polyethyleneimine in the p_H-range of 3.5–4.5. 10g of copper may be separated from 10₅-fold excesses of other transition metals, then eluted with dilute hydrochloric acid and determined photometrically with diethyldithiocarbamate. The method is suitable for determining 0.001% copper in zinc, manganese, cobalt, nickel, cadmium, and aluminium as well as in solutions whose coppercontent is 0.02 ppm.

     

Electron binding energies of aqueous alkali and halide ions: EUV photoelectron spectroscopy of liquid solutions and combined ab initio and molecular dynamics calculations

Photoelectron spectroscopy combined with the liquid microjet technique enables the direct probing of the electronic structure of aqueous solutions. We report measured and calculated lowest vertical electron binding energies of aqueous alkali cations and halide anions. In some cases, ejection from deeper electronic levels of the solute could be observed. Electron binding energies of a given aqueous ion are found to be independent of the counterion and the salt concentration. The experimental results are complemented by ab initio calculations, at the MP2 and CCSD(T) level, of the ionization energies of these prototype ions in the aqueous phase. The solvent effect was accounted for in the electronic structure calculations in two ways. An explicit inclusion of discrete water molecules using a set of snapshots from an equilibrium classical molecular dynamics simulations and a fractional charge representation of solvent molecules give good results for halide ions. The electron binding energies of alkali cations computed with this approach tend to be overestimated. On the other hand, the polarizable continuum model, which strictly provides adiabatic binding energies, performs well for the alkali cations but fails for the halides. Photon energies in the experiment were in the EUV region (typically 100 eV) for which the technique is probing the top layers of the liquid sample. Hence, the reported energies of aqueous ions are closely connected with both structures and chemical reactivity at the liquid interface, for example, in atmospheric aerosol particles, as well as fundamental bulk solvation properties.     

Auftrennung von gemischten Hexa(bromochloro)-rhenaten(IV) und -osmaten(IV) auf Dünnschichtcelluloseplatten

The ions ReBr_nCl _6?n ^2? (0?n?6) and OsBr_nCl _6?n ^2? , respectively, ReO₄ ^? and Br^? have been separated on cellulose using the thin-layer chromatographic technique with 3.2 M sulphuric acid as the mobile phase.     

Solid-Phase Synthesis of a Sialyl-Tn-Glycoundecapeptide of the MUC1 Repeating Unit

The synthesis of glycopeptides carrying tumour-associated antigens is of interest for cancer diagnosis and treatment. Here, a very efficient route lo disaccharide threonine building block 8 is presented which allows the introduction of the sialyl-Tn antigen into a peptide. The syntheses of the undecapeptide and the sialyl-Tn-containing glycoundecapeptide, which are a part of the repeating unit of MUC1, were performed by solid-phase synthesis with an allylic anchor cleavable under neutral conditions. After detachment from the resin, the peptide and the glycopeptide arc completely deprotected giving the target compounds 13 and 15 , respectively.     

Mass spectrometric analysis of ceramic components for solid oxide fuel cells

For the determination of trace impurities in ceramic components of solid oxide fuel cells (SOFCs), some mass spectrometric methods have been applied such as spark source mass spectrometry (SSMS), laser ionization mass spectrometry (LIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and inductively coupled plasma mass spectrometry (ICP-MS). Due to a lack of suitable standard reference materials for quantifying of analytical results on La _x Sr _y MnO₃ cathode material a matrix-matched synthetic standard-high purity initial compounds doped with trace elements-was prepared in order to determine the relative sensitivity coefficients in SSMS and LA-ICP-MS. Radiofrequency glow discharge mass spectrometry (rf-GDMS) was developed for trace analysis and depth profiling of thick non-conducting layers. Surface analytical techniques, such as secondary ion mass spectrometry (SIMS) and sputtered neutral mass spectrometry (SNMS), were used to determine the element distribution on surfaces (homogeneity) and the surface contaminants of SOFC ceramic layers.Dedicated to Professor Dr. rer. nat. Hubertus Nickel on the occasion of his 65th birthday     

Structural characterisation of tyrosine-nitrated peptides by ultraviolet and infrared matrix-assisted laser desorption/ionisation Fourier transform ion cyclotron resonance mass spectrometry

Nitration of tyrosine residues in proteins may occur in cells upon oxidative stress and inflammation processes mediated through generation of reactive nitroxyl from peroxynitrite. Tyrosine nitration from oxidative pathways may generate cytotoxic species that cause protein dysfunction and pathogenesis. A number of protein nitrations in vivo have been reported and some specific Tyrosine nitration sites have been recently identified using mass spectrometric methods. High-resolution Fourier transform ion cyclotron resonance mass spectrometry (MALDI) FT-ICR-MS) is shown here to be a highly efficient method in the determination of protein nitrations. Following the identification of nitration of the catalytic site Tyr-430 residue of bovine prostacyclin synthase, we synthesised several model peptides containing both unmodified tyrosine and 3-nitro-tyrosine residues, using solid-phase peptide synthesis (SPPS). The structures of the nitrotyrosine peptides were characterised both by ESI- and by matrix-assisted laser desorption/ionisation (MALDI)-FT-ICR-MS, using a standard ultraviolet (UV) nitrogen nitrogen laser and a 2.97 microm Nd-YAG infrared laser. Using UV-MALDI-MS, 3-nitrotyrosyl-peptides were found to undergo extensive photochemical fragmentation at the nitrophenyl group, which may hamper or prevent the unequivocal identification of Tyr-nitrations in cellular proteins. In contrast, infrared-MALDI-FT-ICR-MS did not produce fragmentation of molecular ions of Tyr-nitrated peptides.