Breakthrough of polymers in interactive liquid chromatography

Two separate peaks are observed for narrow polymer standards in both isocratic and gradient HPLC. One peak appears around the solvent front (the "solvent-plug peak" or "breakthrough peak"), whereas the second peak is retained significantly--or even highly. Although the effect has been observed many times before, it has never been rigorously explained. In this paper we provide a detailed explanation for the breakthrough peak. The two completely separate peaks are demonstrated not to represent to different fractions of the sample (e.g., the low- and high-molecular-mass parts of the distribution). Both peaks are representative of the entire polymeric sample for narrow polymer standard. Because the amount of the polymer in the breakthrough peak may vary, the quantitative analysis of the polymers by LC is jeopardized. The effects of the sample solvent, the (initial) mobile phase composition, the injection volume, the injected sample concentration, the column temperature, and the analyte structure and molecular mass on the breakthrough peak were investigated in LC experiments involving standards of polystyrene and poly(methyl methacrylate). Three necessary and sufficient conditionsare suggested for the breakthrough phenomenon to be observed. Recommendations to avoid the breakthrough phenomenon are given, culminating in a structured method for selecting the best possible sample solvents.     

The Azo(Azoxy) Functionality as a π2 Component in Photo [2+2] cycloadditions ‘syn’- and ‘anti’-3,4-diazatricyclo[4.2.2.22,5]dodeca-3,7-diene,syntheses, photolyses,X-ray-structure analysis,and PE spectra

The propensity of the N?N bond to undergo photo [2 + 2] cycloadditions has been further explored. In the specifically designed 1,5-azo/enes 1–3 , no [2 + 2] cycloaddition has been observed upon either direct or sensitized excitation with light of various wave lengths at temperatures down to 77 K, in line with expectations based on X-ray ( 1 : d = 2.71 Å, ω = 129°) and PE measurements ( 1 : I₁ = 8.0₀, I₂ = 9.0₅ eV; 2 ; I₁ = 8.0₀, I₂ = 9.2₅eV). The steric/stereoelectronic demands for the participation of the N?N bond in pericyclic reactions are clearly more stringent than those for the C?C bond.     

Na5AlF2(PO4)2: Darstellung,Kristallstruktur und Ionenleitfähigkeit

Na₅AlF₂(PO₄)₂: Synthesis, Crystal Structure and Ionic Conductivity Two different procedures (precipitation from aqueous solution and solid state reaction) for the synthesis of hitherto unknown Na₅AlF₂(PO₄)₂ were optimized. The crystal structure was determined using diffractometer data (P3 , a = b = 10.483(1), c = 6.607(1) Å, MoKα, 1080 independent reflections, R_w = 0.025). PO₄-tetrahedra and AlO₄F₂-“octahedra” are connected via common vertices forming a twodimensionally extended heteropolyanion. Sodium is located in interconnected spacings of the [AlF₂(PO₄)₂]-part of the structure. Ionic conductivity as expected because of these structural features was affirmed experimentally.     

A structure refinement of the high pressure modification BaI2-II

A high pressure phase BaI₂-II, which can be quenched and retained as a metastable form at ambient conditions, is reported. The structure has been determined by X-ray investigations using single crystals. BaI₂-II crystallizes in an anti-Fe₂P-type arrangement, space group $\text{P}\text{6}\text{2m, a = 9.142(6)}$Å, c = 5.173(3)Å, which is slightly denser than the PbCl₂-type structure found at normal pressure. Structural features of the two phases are discussed in comparison.     

Immunoaffinity screening with capillary electrochromatography

Highly efficient capillary electrochromatographic separations of cardiac glycosides and other steroids are presented. Employing butyl-derivatized silica particles as stationary phase resulted in a nearly three times faster electroosmotic flow (EOF) compared to capillary electrochromatography (CEC) with octadecyl silica particles. On-column focusing with a preconcentration factor of 180 was performed and separation efficiencies of up to 240,000 plates per meter were obtained. Using label-free standard UV absorbance, detection limits of 10-80 nM were reached for all steroids tested. For screening of cardiac glycosides, e.g., digoxin and digitoxin in mixtures of steroids, CEC was combined with immunoaffinity extraction using immobilized polyclonal anti-digoxigenin antibodies and F(ab) fragments. Simply adding small amounts of antibody carrying particles to the samples and comparing chromatograms before and after antibody addition allowed screening for high affinity antigens in mixtures with moderate numbers of compounds. Under conditions of competing antigens, affinity fingerprints of immobilized anti-digoxigenin and anti-digitoxin antibodies were obtained, reflecting the cross-reactivity of eleven steroids. The method provides high selectivity due to the combination of bioaffinity interaction with highly efficient CEC separation and UV detection at several wavelengths in parallel. This selectivity was exploited for the detection of four cardiac glycosides in submicromolar concentrations in an untreated urine sample.     

Reinvestigation of the Conformation of Cyclosporin A in Chloroform

New investigations of cyclosporin A in CDCl₃ have been performed to obtain additional and more accurate distance restraints than utilized in our previous studies of cyclosporin A. Build-up rates at 600 MHz using 6 different mixing times at low temperatures (252.5 K) were determined and transformed into distances using the two-spin approximation. With the new distance restraints in the MD simulations using the GROMOS package, we can unambiguously conclude the presence of a βII′-turn. The new structure resembles the X-ray structure more than the structure previously determined, especially regarding the orientation of the MeBmt side chain. In the new structure and in the solid state, the side chain is folded over the backbone (although there are substantial differences in the χ₁ torsion), in contrast to the old structure, where the side chain is extended away from the backbone.     

Ionophoretische Trennung von ReCl62?, ReBr62? und ReO4?

Zusammenfassung Es wurde die ionophoretische Trennung von ReCl₆ ^2–, ReBr₆ ^2– und ReO₄ ^– unter Verwendung verschiedener Papiersorten untersucht. Am geeignetsten erwies sich das Papier 2045 b Gl von Schl. & Sch.

---

Summary The ionophoretic separation of ReCl₆ ^2–, ReBr₆ ^2–, and ReO₄ ^– has been examined using different kinds of paper. Best results have been obtained with the paper 2045 b Gl from Schleicher & Schüll.

---

---

Herrn Prof. G. Brauer danke ich für Förderung. Für die Überlassung von Rheniumverbindungen bin ich der Fa. W. C. Heraeus, Hanau, verpflichtet. Die Neutronenaktivierung wurde freundlicherweise von den Herren Dr. Marth und Dr. Köhler von der Reaktorstation in Garching bei München vorgenommen. Das Bundesministerium für Atomkernenergie und Wasserwirtschaft unterstützte die Untersuchung durch eine Sachbeihilfe.     

Derivatization of carboxylic acids with 9-bromomethylacridine using micellar phase-transfer catalysis

Summary Micellar phase-transfer catalysis (MPTC) offers the opportunity to derivatize carboxylic acids directly in an aqueous matrix without prior extraction of the acids into a suitable aprotic solvent. The currently developed MPTC system consists of a non-ionic surfactant, Arkopal N-130, an ion-pair agent, tetrakis-(decyl)-ammonium bromide, and a novel fluorescence reagent, 9-bromomethylacridine. The MPTC system can be applied to the derivatization of many types of carboxylic acids. The reaction rate is affected by the lipophilicity of the acid and by the presence of other functional groups. For lipophilic carboxylic acids the reaction is complete within 5 min at 60°C and pH 7.0.     

Designed Beta‐Turn Mimic Based on the Allylic‐Strain Concept: Evaluation of Structural and Biological Features by Incorporation into a Cyclic RGD Peptide (Cyclo(‐L‐arginylglycyl‐L‐α‐aspartyl‐))

The (3R,5S,6E,8S,10R)‐11‐amino‐3,5,8,10‐tetramethylundec‐6‐enoic acid (ATUA; 1 ), which was designed as a βII′‐turn mimic according to the concepts of allylic strain and 2,4‐dimethylpentane units, was incorporated into a cyclic RGD peptide. The three‐dimensional structure of cyclo(‐RGD‐ATUA‐) (=cyclo(‐Arg‐Gly‐Asp‐ATUA‐)) 4 in H₂O was determined by NMR techniques, distance geometry calculations and molecular‐dynamics simulations. The RGD sequence of 4 shows high conformational flexibility but some preference for an extended conformation. The structural features of the RGD sequence of 4 were compared with the RGD moiety of cyclo(‐RGDfV‐) (=cyclo(‐Arg‐Gly‐Asp‐D ‐Phe‐Val‐)). In contrast to cyclo(‐RGDfV‐), which is a highly active αvβ3 antagonist and selective against αIIbβ3, cyclo(‐RGD‐ATUA‐) shows a lower activity and selectivity. The structure of the ATUA residue in the cyclic peptide resembles a βII′‐turn‐like conformation. Its middle part, adjacent to the C?C bond, strongly prefers the designed and desired structure.     

CdSe and CdSe/CdS nanorod solids

We demonstrate the self-organization of CdSe nanorods into nematic, smectic, and crystalline solids. Layered colloidal crystals of CdSe nanorods grow by slow destabilization of a nanocrystal solution upon allowing the diffusion of a nonsolvent into the colloidal solution of nanocrystals. The colloidal crystals of nanorods show characteristic birefringence, which we assign to specific spherulite-like texture of each nanorod assembly. To demonstrate the general character of nanorod self-assembly technique, CdSe/CdS heterostructure nanorods were organized into highly luminescent superlattices.