In Situ Proteome Profiling and Bioimaging Applications of Small‐Molecule Affinity‐Based Probes Derived From DOT1L Inhibitors

DOT1L is the sole protein methyltransferase that methylates histone H3 on lysine 79 (H3K79), and is a promising drug target against cancers. Small‐molecule inhibitors of DOT1L such as FED1 are potential anti‐cancer agents and useful tools to investigate the biological roles of DOT1L in human diseases. FED1 showed excellent in vitro inhibitory activity against DOT1L, but its cellular effect was relatively poor. In this study, we designed and synthesized photo‐reactive and “clickable” affinity‐based probes (AfBPs), P1 and P2 , which were cell‐permeable and structural mimics of FED1 . The binding and inhibitory effects of these two probes against DOT1L protein were extensively investigated in vitro and in live mammalian cells (in situ). The cellular uptake and sub‐cellular localization properties of the probes were subsequently studied in live‐cell imaging experiments, and our results revealed that, whereas both P1 and P2 readily entered mammalian cells, most of them were not able to reach the cell nucleus where functional DOT1L resides. This offers a plausible explanation for the poor cellular activity of FED1 . Finally with P1 / P2 , large‐scale cell‐based proteome profiling, followed by quantitative LC‐MS/MS, was carried out to identify potential cellular off‐targets of FED1 . Amongst the more than 100 candidate off‐targets identified, NOP2 (a putative ribosomal RNA methyltransferase) was further confirmed to be likely a genuine off‐target of FED1 by preliminary validation experiments including pull‐down/Western blotting (PD/WB) and cellular thermal shift assay (CETSA).     

Non‐coordinating‐Anion‐Directed Reversal of Activation Site: Selective C−H Bond Activation of N‐Aryl Rings

An Rh‐catalyzed selective C?H bond activation of diaryl‐substituted anilides is described. In an attempt to achieve C?H activation of C‐aryl rings, we unexpectedly obtained an N‐aryl ring product under non‐coordinating anion conditions, whereas the C‐aryl ring product was obtained in the absence of a non‐coordinating anion. This methodology has proved to be an excellent means of tuning and adjusting selective C?H bond activation of C‐aryl and N‐aryl rings. The approach has been rationalized by mechanistic studies and theoretical calculations. In addition, it has been found and verified that the catalytic activity of the rhodium catalyst is obviously improved by non‐coordinating anions, which provides an efficient strategy for obtaining a highly chemoselective catalyst. Mechanistic experiments also unequivocally ruled out the possibility of a so‐called “silver effect” in this transformation involving silver.     

Copper‐Catalyzed Reaction Cascade of Thiophenol Hydroxylation and S‐Arylation through Disulfide‐Directed C−H Activation

Copper‐catalyzed thiophenol C?H activation is described. Through an initial attempt to conduct C‐arylation with arylboronic acid, a rather surprising sequential C?H activation and S‐arylation was discovered. Mechanistic investigation revealed the disulfide intermediate as the key component in directing C?H oxidation. The overall reaction proceeded under mild conditions with molecular oxygen as the oxidant. Discovery of disulfide as the directing group provides a potential new direction for catalytic C?H functionalization under mild conditions.     

微重力条件下与容器连通的毛细管中的毛细流动研究

利用落塔的短时微重力条件, 实验研究了与容器连通的毛细管中的流体在微重力条件下的毛细流动过程, 并通过理论分析建立了相应的毛细管中弯月液面高度随时间变化的微分方程. 结果表明, 对于不同的接触角和不同的容器/毛细管参数, 由建立的理论公式得到的数值解结果都与实验结果在定量上较为一致. 此外, 实验中发现, 改变乙醇和去离子水混合液的比例可以明显地改变接触角参数, 但对毛细流动的影响很小, 建立的理论公式也对这一现象给出了合理的解释. 该研究对于预测和分析微流道及空间微重力条件下的毛细流动行为具有明显的应用价值.     

浅析电子型掺杂铜氧化物超导体的退火过程

铜氧化物高温超导体的发现, 打破了基于电声子相互作用BCS理论所预言的超导转变温度极限, 掀开了高温超导材料探索和高温超导机理研究的序幕. 根据掺杂类型的不同, 铜氧化物超导材料可以分为空穴型掺杂和电子型掺杂两类. 受限于样品, 对电子型掺杂铜氧化物的研究工作远少于空穴型掺杂体系. 本文简要回顾有关电子型掺杂铜氧化物超导体近期研究成果, 通过对比电子型掺杂和空穴型掺杂铜氧化物的相图来阐明电子型掺杂铜氧化物的研究对探索高温超导机理的必要性, 并特别针对电子型掺杂样品制备中的关键因素“退火过程”展开讨论. 结合课题组最新实验结果和相关实验报道我们发现电子型掺杂铜氧化物超导体在制备过程中除受到温度和氧分压的影响外, 退火效果还受到界面应力的强烈调制. 在综合考虑样品生长过程中温度、气氛及应力等多种因素的基础上, 探讨了“保护退火”方法导致电子型体系化学掺杂相图变化的起因.     

Reduced-temperature ordering of FePt nanoparticle assembled films by Fe30Pt70/Fe3O4 core/shell structure

In this paper, Fe30Pt70/Fe3O4 core/shell nanoparticles were synthesized by chemical routine and the layered polyethylenimine （PEI）-Fe30Pt70/Fe3O4 structure was constructed by molecule-mediated self-assembly technique. The dimension of core/shell structured nanoparticles was that of 4nm core and 2 nm shell. After annealing under a flow of forming gas （50%Ar2＋30%H2） for 1 h at or above 400℃, the iron oxide shell was reduced to Fe and diffused to Pt-rieh core, which leaded to the formation of L1. phase FePt at low temperature. The x-ray diffraction results and magnetic properties measurement showed that the chemical ordering temperature of Fe30Pt70/Fe3O4 core/shell nanoparticles assembly can be reduced to as low as 400℃. The sample annealed at 400℃ showed the eoereivity of 4KOe with the applied field of 1.5T. The core/shell structure was suggested to be an effective way to reduce the ordering temperature obviously.[第一段]     

溶液和熔化状态下分子间的能量传递

通过二维红外光谱研究了GdmSCN/KSCN=1/1,GdmSCN/KS¹³CN=1/1和GdmSCN/KS¹³C¹⁵N=1/1三种混合晶体在熔融和溶液状态下的共振和非共振的分子间振动能量传递的性质. 在这些样品中,给体/受体的能量差越大,能量传递越慢. 而能量传递的快慢与拉曼光谱无关. 非共振能量传递与给体/受体的能量差的关系不能用声子补偿的机理来描述. 相反,它们的关系却可以用退相位机理来定量描述. 在熔融状态下,共振和非共振能量速率与温度的依赖关系也与退相位机理的预测相符合. 这一系列的结果表明只要分子的运动(平动和转动)远远快于非共振能量传递速率,那么退相位机理不仅在溶液中占主导,而且在熔融状态下(纯液体,不含溶剂)也占主导.     

三维光晶格中玻色凝聚气体基态波函数及干涉演化

基于Gross-Pitaevskii方程，运用有效化学势概念，研究了囚禁在组合势(由磁阱和三维光 晶格组成)中玻色凝聚气体在三维光晶格中的分布规律，并由此得到玻色凝聚气体的归 一化基态波函数.在取消组合势和仅取消光晶格而保留磁阱的两种情况下，运用传播子方 法求解出玻色凝聚气体密度分布的解析表达式.取消组合势后，理论计算所得到的玻色凝聚 气体聚随时间的演化规律与Greiner等的实验结果相一致.仅取消光晶格而保留磁阱时，研 究表明玻色凝聚气体的干涉模式呈现周期性的振荡行为.此外，在磁阱为各向异性的情况下 ， 关键词： 玻色凝聚气体 磁阱 光晶格 干涉模式