Syntheses and characterizations of poly[2‐(dimethylamino)ethyl methacrylate]–poly(propylene oxide)–poly[2‐(dimethylamino)ethyl methacrylate] ABA triblock copolymers

A novel, near‐monodisperse, well‐defined ABA triblock copolymer, poly[2‐(dimethylamino)ethyl methacrylate]‐b‐poly(propylene oxide)‐b‐poly[2‐(dimethylamino)ethyl methacrylate], was synthesized via oxyanion‐initiated polymerization. The initiator was a telechelic‐type potassium alcoholate prepared from poly(propylene glycol) and KH in dry tetrahydrofuran. The copolymers produced were characterized by Fourier transform infrared, ¹H NMR, and gel permeation chromatography (GPC). GPC and ¹H NMR analyses showed that the products obtained were the desired copolymers, with narrow molecular weight distributions (ca. 1.09–1.11) very close to that of the original poly(propylene glycol). ¹H NMR, surface tension measurements, and dynamic light scattering all indicated that the triblock copolymer led to interesting aqueous solution behaviors, including temperature‐induced micellization and very high surface activity. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 624–631, 2002; DOI 10.1002/pola.10144     

Molecular structure of meso-tetraphenylporphyrinatothallium(III) cyanide: Tl(tpp) (CN)

meso-Tetraphenylporphyrinatothallium(III) cyanide, Tl(tpp)(CN), was previously assumed to be monomeric and has been confirmed by X-ray analysis to exist as two independent molecules in one asymmetric unit. This unit displays two square-pyramidal coordination geometries for the thallium atoms with the cyano ligand coordinated to both Tl atoms. It crystallizes in the triclinic space group P , with a 10.003(3), b 16.231(7), c 21.277(8) Å, 89.98(3), β 90.57(3), γ 90.31(3)°' and z = 4. The structure was solved by direct methods. A total of 7995 unique reflections having I > 3σ(I) was measured with an automated diffractometer and used to refine the crystal structure to a conventional R factor of 6.05 %. The thallium-cyanide distances are 2.140(14) Å (for thallium(I)) and 2.277(14) Å (for thallium(2)) respectively, with thallium(1) situated 0.908 Å above the porphyrin ring and thallium(2) located 1.027 Å below the ring. IR and NMR spectroscopy p rovide complementary methods for investigation of the CN ligand. The characteristic band observed at 2160 cm⁻¹ in the FTIR spectrum is assigned to the CN stretching in the Tl(tpp)(CN) complex. The ¹³C resonance of axial cyano ligand is observed with a pulse delay of 3.5 s at 24°C at 139.2 ppm (with ¹J(²⁰⁵Tl-¹³C) 5394 and ¹J(²⁰³Tl-¹³C) 5344 Hz). This observation disagrees with the conclusion, drawn from previous work, in that an exchange process involving the apical ligand explains the invisibility due to line broadening at 35°C of the ¹³C signal.     

Benzothiazines in synthesis. Toward the synthesis of pseudopteroxazole

[reaction: see text] The tricyclic benzothiazine 15 was prepared in a straightforward fashion via a completely stereoselective intramolecular Friedel-Crafts alkylation. This compound represents a potential precursor to the antitubercular agent, pseudopteroxazole. Its synthesis proceeded via a completely selective, intramolecular addition of a sulfoximine-stabilized carbanion to an alpha,beta-unsaturated ester, followed by functional group manipulations.     

First principles study of the structure,electronic state,and stability of CmN2 clusters

Geometric and electronic properties of C_mN₂ (m = 1–14) clusters have been investigated by density functional theory using the hybrid B3LYP functional and the 6‐311G(d) basis set. Harmonic frequencies for these clusters are given to aid in the characterization of the ground states. These results show that C_mN₂ (m = 1–14) clusters form linear structures with D_∞h symmetry. Two N atoms favor to bond at ends in linear isomers. The chains with odd m have triplet ground states whereas the ones with even m have singlet ground states. The calculated HOMO–LUMO gaps and ionization potentials all show that the C_mN₂ (m = 1–14) clusters with even m are more stable than those with odd m, which is consistent with the observed even–odd alternation of the time‐of‐flight signal intensities. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Electronic structure and molecular orbital study of the first excited state of the high‐efficiency blue OLED material bis(2‐methyl‐8‐quinolinolato)aluminum(III) hydroxide complex from ab initio and TD‐B3LYP

Bis(2‐methyl‐8‐quinolinolato)aluminum(III) hydroxide complex (AlMq₂OH) is used in organic light‐emitting diodes (OLEDs) as an electron transport material and emitting layer. By means of ab initio Hartree–Fock (HF) and density functional theory (DFT) B3LYP methods, the structure of AlMq₂OH was optimized. The frontier molecular orbital characteristics and energy levels of AlMq₂OH have been analyzed systematically to study the electronic transition mechanism in AlMq₂OH. For comparison and calibration, bis(8‐quinolinolato)aluminum(III) hydroxide complex (Alq₂OH) has also been examined with these methods using the same basis sets. The lowest singlet excited state (S₁) of AlMq₂OH has been studied by the singles configuration interaction (CIS) method and time‐dependent DFT (TD‐DFT) using a hybrid functional, B3‐LYP, and the 6‐31G* basis set. The lowest singlet electronic transition (S₀ → S₁) of AlMq₂OH is π → π* electronic transitions and primarily localized on the different quinolate ligands. The emission of AlMq₂OH is due to the electron transitions from a phenoxide donor to a pyridyl acceptor from another quinolate ligand including C → C and O → N transference. Two possible electron transfer pathways are presented, one by carbon, oxygen, and nitrogen atoms and the other via metal cation Al³⁺. The comparison between the CIS‐optimized excited‐state structure with the HF ground‐state structure indicates that the geometric shift is mainly confined to the one quinolate and these changes can be easily understood in terms of the nodal patterns of the highest occupied and lowest unoccupied molecular orbitals. On the basis of the CIS‐optimized structure of the excited state, TD‐B3‐LYP calculations predict an emission wavelength of 499.78 nm. An absorption wavelength at 380.79 nm on the optimized structure of B3LYP/6‐31G* was predicted. They are comparable to AlMq2OH 485 and 390 nm observed experimentally for photoluminescence and UV‐vis absorption spectra of AlMq₂OH solid thin film on quartz, respectively. Lending theoretical corroboration to recent experimental observations and supposition, the reasons for the blue‐shift of AlMq2OH were revealed. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Crosslinking polydopamine/cellulose nanofibril composite aerogels by metal coordination bonds for significantly improved thermal stability,flame resistance,and thermal insulation properties

Cellulose nanofibril (CNF) aerogels have attracted great interests in recent years due to the low cost, sustainability and biocompatibility of raw CNF. However, the poor thermal stability and flammable feature of CNF aerogels have limited their wider applications. In this paper, polydopamine/CNF composite aerogels with good comprehensive properties are fabricated by modification of CNF with polydopamine and metal coordination bonds crosslinking. The microstructure and properties of composite aerogels are thoroughly characterized by a variety of tests. It is found that the microstructure of aerogels are more regular and the compressive strength of aerogels are enhanced by the incorporation of polydopamine and Fe³⁺ crosslinking. Importantly, the thermal stability and flame resistance of aerogels are significantly improved, which permit the application of composite aerogels in high-temperature thermal insulation. In addition, the reversible characteristic of metal coordination bonds allows the water induced healing of fractured composite aerogels. This study is expected to provide information for future development of green and high-performance aerogels.

Graphic abstract

     

低价钛引起的芳酮肟的反应

在低价钛试剂 (TiCl4/Sm)作用下取代苯乙酮肟发生脱肟反应生成酮 ,而在同样条件下 ,二芳酮肟则生成二芳酮、胺或希夫碱     

Hydrothermal Synthesis and Structure of a New 3D Lanthanide—Carboxylate Framework,[La（btec）1／2（H2btec）1／2（H2O）]n（H4btec=1,2,4,5—Benzeneteracarboxylic acid）

The title complex, [La(btec)_1/2(H₂btec)_1/2 (H₂O)]_n (H₄btec= 1, 2,4,5‐benzenetetracarboxylic acid) (1) was synthesized by the hydrothermal reaction of 1,2,4,5‐benzenetetracarboxylic dianhydride with La(NO₃)₃·6H₂O in H₂O, and crystallizes in the triclinic system, space group P‐1 with a = 0.64403(3) nm, b = 0.94500(4) nm, c = 0.96380(5) nm, a = 88.535(2)°, β = 100.314(2)°, γ = 76.6470(10)°, V = 1.60968(10) nm³, Z = 2, and final R = 0.0274, R_w = 0.0735. In 1, each La(m) ion is coordinated by eight oxygen atoms from six carboxylate groups and one coordinated water molecule. Two different coordination modes of H₄btec were present in the structure, one of which contains two protonated carboxylate groups to balance the charge.     

On [Fe4S4]2+ -(mu2-SR)-M II bridge formation in the synthesis of an A-cluster analogue of carbon monoxide dehydrogenase/acetylcoenzyme A synthase

The construction of a synthetic analogue of the A-cluster of carbon monoxide dehydrogenase/acetylcoenzyme synthase, the site of acetylcoenzyme A formation, requires as a final step the formation of an unsupported [Fe(4)S(4)]-(mu(2)-SR)-Ni(II) bridge to a preformed cluster. Our previous results (Rao, P. V.; Bhaduri, S.; Jiang, J.; Holm, R. H. Inorg. Chem. 2004, 43, 5833) and the work of others have addressed synthesis of dinuclear complexes relevant to the A-cluster. This investigation concentrates on reactions pertinent to bridge formation by examining systems containing dinuclear and mononuclear Ni(II) complexes and the 3:1 site-differentiated clusters [Fe(4)S(4)(LS(3))L'](2-) (L' = TfO(-) (14), SEt (15)). The system 14/[{Ni(L(O)-S(2)N(2))}M(SCH(2)CH(2)PPh(2))](+) results in cleavage of the dinuclear complex and formation of [{Ni(L(O)-S(2)N(2))}Fe(4)S(4)(LS(3))]- (18), in which the Ni(II) complex binds at the unique cluster site with formation of a Ni(mu(2)-SR)(2)Fe bridge rhomb. Cluster 18 and the related species [{Ni(phma)}Fe(4)S(4)(LS(3))](3)- (19) are obtainable by direct reaction of the corresponding cis-planar Ni(II)-S(2)N(2) complexes with 14. The mononuclear complexes [M(pdmt)(SEt)]- (M = Ni(II), Pd(II)) with 14 in acetonitrile or Me(2)SO solution react by thiolate transfer to give 15 and [M(2)(pdmt)(2)]. However, in dichloromethane the Ni(II) reaction product is interpreted as [{Ni(pdmt)(mu(2)-SEt)}Fe(4)S(4)(LS(3))](2-) (20). Reaction of Et(3)NH(+) and 15 affords the double cubane [{Fe(4)S(4)(LS(3))}(2)(mu(2)-SEt)](3-) (21). Cluster 18 contains two mutually supportive Fe-(mu(2)-SR)-Ni(II) bridges, 19 exhibits one strong and one weaker bridge, 20 has one unsupported bridge (inferred from the (1)H NMR spectrum), and 21 has one unsupported Fe-(mu(2)-SR)-Fe bridge. Bridges in 18, 19, and 21 were established by X-ray structures. This work demonstrates that a bridge of the type found in the enzyme A-clusters is achievable by synthesis and implies that more stable, unsupported single thiolate bridges may require reinforcement by an additional covalent linkage between the Fe(4)S(4) and nickel-containing components. (LS(3) = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-); L(O)-S(2)N(2) = N,N'-diethyl-3,7-diazanonane-1,9-dithiolate(2-); pdmt = pyridine-2,6-methanedithiolate(2-); phma = N,N'-1,2-phenylenebis(2-acetylthio)acetamidate(4-); TfO = triflate.).     

树脂填充EVAL纤维吸附剂的制备及其吸附性能表征

采用具有亲水性的乙烯-乙烯醇共聚物(EVAL)作为纤维吸附剂基质材料,粉末型Lewatit阳离子交换树脂CNP80ws为功能材料,采用可控相分离方法,制备了不同表面形态结构的树脂填充EVAL吸附剂.当使用外部液体调控相分离过程时,在纤维的表面形成了粗糙的开孔结构,并且随树脂的填充量提高纤维表面的粗糙度与开孔度有所提高.研究结果表明:树脂填充EVAL纤维吸附剂具有较大的吸附容量与较高的脱附率,其吸附容量不低于53.9mg BSA/g吸附剂(树脂填充量50%).