太阳运动模拟平台的单片机控制

针对用太阳运动模拟平台实现太阳运行位置的全面预测和重现这一问题,提出了采用单片机对该平台进行控制,电机通过变频实现不同时间段不同速率运动模拟太阳运行轨迹的方法。根据输入日期计算出太阳的高度角和方位角,并转换为驱动电机的脉冲数和频率,电机带动执行机构运动使模拟光源到达预定位置。用编码器测量电机实际脉冲,定期进行误差校正来提高系统的稳定性和精度,减少误差。经过实验验证,该平台能够使模拟光源按照预计的轨迹运动,得出该方法是可行的,所设计的程序具有可靠性的结论。     

确定性矩阵可分离压缩成像

针对可分离压缩传感使用的可分离随机正交矩阵在处理大尺度图像等高维信号感知时难度太大或成本过高的问题,引入确定性测量矩阵,提出确定性矩阵可分离压缩传感,可将如托普利兹矩阵及循环矩阵等具有确定性结构的矩阵作为可分离压缩传感的左、右可分离矩阵.该方案可以降低独立元素的数目,从而显著降低前端物理实现的难度与成本.数值模拟实验分别评估了该方法在不同采样率及不同图像尺寸下的压缩重建性能,结果表明该方法在独立元素非常少的情形下得到与原随机正交矩阵相近的重建质量,证明了其可行性.     

Characterization of Cr‐doped Sb2Te3 films and their application to phase‐change memory

Phase‐change memory (PCM) is regarded as one of the most promising candidates for the next‐generation nonvolatile memory. Its storage medium, phase‐change material, has attracted continuous exploration. Along the traditional GeTe–Sb₂Te₃ tie line, the binary compound Sb₂Te₃ is a high‐speed phase‐change material matrix. However, the low crystallization temperature prevents its practical application in PCM. Here, Cr is doped into Sb₂Te₃, called Cr–Sb₂Te₃ (CST), to improve the thermal stability. We find that, with increase of the Cr concentration, grains are obviously refined. However, all the CST films exhibit a single hexagonal phase as Sb₂Te₃ without phase separation. Also, the Cr helps to inhibit oxidation of Sb atoms. For the selected film CST_10.5, the resistance ratio between amorphous and crystalline states is more than two orders of magnitude; the temperature for 10‐year data retention is 120.8 °C, which indicates better thermal stability than GST and pure Sb₂Te₃. PCM cells based on CST_10.5 present small threshold current/voltage (4 μA/0.67 V). In addition, the cell can be operated by a low SET/RESET voltage pulse (1.1 V/2.4 V) with 50 ns width. Thus, Cr–Sb₂Te₃ with suitable composition is a promising novel phase‐change material used for PCM with high speed and good thermal stability performances. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Improvement of resistive switching fluctuations by using one step lift‐off process

Bipolar resistive switching characteristics are investigated in ZrO₂ containing Cu thin layer devices, particularly for the self‐isolated‐structure device fabricated by one step lift‐off process. Compared with the traditional‐structure device, the self‐isolated‐structure device shows more uniform resistive switching characteristics. This is because the isolation of each device cell has negligible influence on each other and thus mitigates possible crosstalk between each cell. These results suggest that the feasibility of good stabilization of the resistive switching parameters can be obtained through one step lift‐off process. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Low-Energy Dislocation Structure (LEDS) character of dislocation boundaries aligned with slip planes in rolled aluminium

For the specific slip geometry of two sets of coplanar systems (a total of four systems) in fcc metals, the range of dislocation networks in boundaries aligned with one of the two active slip planes is predicted from the Frank equation for boundaries free of long-range elastic stresses. Detailed comparison with experimental data for eight dislocation boundaries in cold-rolled aluminium grains of the 45° ND rotated Cube orientation is conducted. It is concluded that the boundaries are Low-Energy Dislocation Structures, which are in good agreement with the Frank equation while also lowering the energy by dislocation reactions. Cross slip plays a role in the boundary formation process.     

Pulsed microwave-driven argon plasma jet with distinctive plume patterns resonantly excited by surface plasmon polaritons

Atmospheric lower-power pulsed microwave argon cold plasma jets are obtained by using coaxial transmission line resonators in ambient air.The plasma jet plumes are generated at the end of a metal wire placed in the middle of the dielectric tubes.The electromagnetic model analyses and simulation results suggest that the discharges are excited resonantly by the enhanced electric field of surface plasmon polaritons.Moreover,for conquering the defect of atmospheric argon filamentation discharges excited by 2.45-GHz of continued microwave,the distinctive patterns of the plasma jet plumes can be maintained by applying different gas flow rates of argon gas,frequencies of pulsed modulator,duty cycles of pulsed microwave,peak values of input microwave power,and even by using different materials of dielectric tubes.In addition,the emission spectrum,the plume temperature,and other plasma parameters are measured,which shows that the proposed pulsed microwave plasma jets can be adjusted for plasma biomedical applications.     

Microwave-Assisted Synthesis,Crystal Structure and Magnetic Behavior of a Schiff Base Heptanuclear Cobalt Cluster

The reaction of Co(ClO₄)₂·6H₂O with 2-hydroxy-3-methoxy-benzaldehyde and an aqueous solution of methylamine in acetonitrile/MeOH under microwave irradiation and controlled temperature/pressure leads to formation of heptanuclear cobalt cluster [Co₇(mmp)₆(CH₃O)₆]·(ClO₄)₂ (1) (mmp is 2-methoxy-6-methyliminomethyl-phenol anion) in only 20 min and also results in higher yields in contrast to other synthesis methods. Complex 1 displays dominant ferromagnetic interactions through μ ₃-O and μ ₂-O (oxidophenyl) binding modes.