Beyond the benzene dimer: an investigation of the additivity of pi-pi interactions

The benzene dimer is the simplest prototype of pi-pi interactions and has been used to understand the fundamental physics of these interactions as they are observed in more complex systems. In biological systems, however, aromatic rings are rarely found in isolated pairs; thus, it is important to understand whether aromatic pairs remain a good model of pi-pi interactions in clusters. In this study, ab initio methods are used to compute the binding energies of several benzene trimers and tetramers, most of them in 1D stacked configurations. The two-body terms change only slightly relative to the dimer, and except for the cyclic trimer, the three- and four-body terms are negligible. This indicates that aromatic clusters do not feature any large nonadditive effects in their binding energies, and polarization effects in benzene clusters do not greatly change the binding that would be anticipated from unperturbed benzene-benzene interactions, at least for the 1D stacked systems considered. Three-body effects are larger for the cyclic trimer, but for all systems considered, the computed binding energies are within 10% of what would be estimated from benzene dimer energies at the same geometries.     

Synthesis of gramicidin S and its analogues via an on-resin macrolactamization assisted by a predisposed conformation of the linear precursors

A simple and efficient preparation of gramicidin S and its analogues is described. It involves solid-phase peptide synthesis and on-resin macrolactamization without side chain protection, affording cyclic products in high yield and high purity. The high specificity of the cyclization reaction was shown to originate in the formation of a pre-organized conformation of the linear biosynthetic precursor of gramicidin S. This facile method will provide convenient access to the analogues of the natural product for functional optimization to counter microbial resistance.     

Half-sandwich titanium(IV) complexes with Kläui's tripod ligand

Treatment of [Ti(O-i-Pr)(2)Cl(2)] with NaL(OEt) (L(OEt)(-) = [CpCo[P(O)(OEt)(2)](3)](-), Cp = eta(5)-C(5)H(5)) afforded [L(OEt)Ti(O-i-Pr)(2)Cl] that reacted with HCl in ether to give [L(OEt)TiCl(3)] (1). The average Ti-O and Ti-Cl distances in 1 are 1.975 and 2.293 A, respectively. Reaction of titanyl sulfate with NaL(OEt) in water followed by addition of HBF(4) afforded [L(OEt)TiF(3)] (2), the Ti-O and Ti-F distances of which are 2.020(2) and 1.792(2) A, respectively. The Zr(IV) analogue [L(OEt)ZrF(3)] (3) was prepared similarly from zirconyl nitrate, NaL(Oet), and HBF(4) in water. The Zr-O and average Zr-F distances in 3 are 2.139(2) and 1.938(2) A, respectively. Treatment of 1 with tetrachlorocatechol (H(2)Cl(4)cat) afforded [L(OEt)Ti(Cl(4)cat)Cl] (4). The average Ti-O(P), Ti-O(C), and Ti-Cl distances in 4 are 1.972, 1.926, and 2.334 A, respectively. Hydrolysis of 4 in the presence of Et(3)N yielded the mu-oxo dimer [(L(OEt))(2)Ti(2)(Cl(4)cat)(2)(mu-O)] (5). The average Ti-O(P), Ti-O(C), and Ti-O(Ti) distances in 5 are 2.027, 1.926, and 1.7977(9) A. Treatment of 1 with 1,1'-binaphthol (BINOLH(2)) in the presence of Et(3)N afforded [(L(OEt))(2)Ti(2)(mu-O)(2)(mu-BINOL)] x 2BINOLH(2) (6.2BINOLH(2)). Complex 1 is capable of catalyzing ring opening of epoxides with Me(3)SiN(3) under solvent-free conditions presumably via a Ti-azide intermediate.     

Traceless solid-phase synthesis of nitrogen-containing heterocycles and their biological evaluations as inhibitors of neuronal sodium channels

The preparation of pyrimidine-2-thione, pyrimidine-2-one, pyrimidine, and benzo[b][1,4]diazepine derivatives using traceless solid-phase sulfone linker strategy is described. Key steps involved are (i) sulfinate S-alkylation, (ii) sulfone anion alkylation with an epoxide, (iii) gamma-hydroxyl sulfone --> gamma-ketosulfone oxidation, and (iv) traceless product release by a one-pot elimination-cyclization process. Elimination-cyclization was carried out under basic conditions with thiourea, methyl thiourea, methyl urea, guanidine hydrochloride, benzamidine hydrochloride and ortho-phenylene diamine. Twenty-three compounds were prepared, and 14 of them were evaluated by the Batrachotoxin (BTX) radioligand binding assay for their binding affinity to neuronal sodium channels. Compound 7c was found to be a potential neuronal sodium channels blocker.     

Development and application of a new general method for the asymmetric synthesis of syn- and anti-1,3-amino alcohols

A general method is described for asymmetric synthesis of both syn- and anti-1,3-amino alcohols. The first application of metalloenamines derived from N-sulfinyl imines is reported for the highly diastereoselective addition to aldehydes. The reduction of the product beta-hydroxy N-sulfinyl imines 2 with catecholborane and LiBHEt(3) provides syn- and anti-1,3-amino alcohols with very high diastereomeric ratios. This method was found to be effective for a variety of substrates incorporating either aromatic or various aliphatic substituents. The convergent and efficient asymmetric syntheses of the two natural products, (-)-8-epihalosaline and (-)-halosaline, were also accomplished.     

Equilibrium studies of the sorption of Cu(II) ions onto chitosan

Chitosan is a polymer that can be obtained from the shells of seafood such as prawns, crabs, and lobsters. Chitosan has free amino groups, which can attract metal ions, and has been used as an adsorbent for the removal of metal ions from effluents. In this research, the sorption of copper ions from solution onto chitosan at two pHs has been investigated. DSC, TGA, surface area, SEM, and NMR studies have been used to report the pure physical states of chitosan and the chitosan-copper complex. The experimental isotherm data were analyzed using the Langmuir, Freundlich, and Redlich-Peterson equations. Correlation coefficients were determined for each isotherm analysis. Error functions have been used to determine the alternative single component parameters by nonlinear regression due to the inherent bias in using the correlation coefficient resulting from linearization. The error function method provided the best parameters for the isotherm equations in this system and is demonstrated for error comparison purposes.     

Synergic extraction for recovery of americium from waste solution containing an excess of uranium

A method based on synergic extraction has been evolved for the recovery of tens of milligrams of americium from analytical wastes in 7-8M HNO₃ medium containing excess uranium as a two step procedure viz., (1) separation of uranium by contacting with TBP in dodecane and (2) recovery of americium by an extraction-cum-strip cycle using a synergic mixture of PMBP-TBP in dodecane after decreasing the acidity of the solution. Other transition metals such as iron found in significant proportion were separated from Am by using the difference in the kinetics of extraction of iron and americium into HPMBP-TBP-dodecane mixture by short duration contacts. About 99% of Am could be recovered into about 20% of its initial volume. This revised version was published online in July 2006 with corrections to the Cover Date.     

The kinetics of hydrogen peroxide initiated polymerisation of methacrylamide

A kinetic study of the aqueous polymerisation of methacrylamide initiated by hydrogen peroxide has shown that the polymerisation proceeds in two stages. The rate of polymerisation up to about 16% conversion is represented by the equation

Within this period, the hydrogen peroxide is completely consumed and a hydroperoxide of methacrylamide is formed. Subsequently this hydroperoxide initiates polymerisation.     

Systematic optimization of micellar electrokinetic chromatographic separation of flavonoids

Summary A simple and rapid systematic optimization scheme was described for the micellar electrokinetic chromatographic separation of a group of flavonoids. The scheme employed an interpretative optimization approach to predict the optimum conditions for the separation of a group of flavonoids by micellar electrokinetic chromatography. By performing a set of nine pre-planned experiments conducted over the maximum working range for the system, global optimum separation conditions could be determined. To validate the optimization procedure, additional experiments were performed using the optimum experimental conditions derived from the optimization scheme. The results showed that satisfactory separation of all the peaks could be obtained. In addition, the application of the method in micropreparative micellar electrokinetic chromatography of the flavonoids was demonstrated.     

Simple alkenes as substitutes for organometallic reagents: nickel-catalyzed, intermolecular coupling of aldehydes, silyl triflates, and alpha olefins

A nickel-catalyzed method for the three-component coupling of alkenes (ethylene and alpha olefins), aldehydes, and silyl triflates is described, and this process represents the first catalytic method for coupling aldehydes and alkenes to give allylic alcohol derivatives. Conceptually, the alkene functions as a replacement for an alkenylmetal reagent.