Quantitative millimetre wavelength spectrometry at pressures approaching atmospheric: II. Determination of oxygen at atmospheric pressure

A millimetre wavelength (MMW) Fabry-Perot cavity spectrometer described in earlier work has been applied to the measurement of oxygen absorption at 60 GHz and atmospheric pressure in a gas matrix of nitrogen. The spectrometer has also been modified such that the MMW source is stabilised by a sub-harmonic microwave signal transmitted by an infrared carrier on a single mode telecommunications fibre optic. This is a step towards developing an instrument comprising minimal electronic components that can perform MMW spectrometry remotely. Oxygen determinations were achieved by monitoring the change in the quality factor (Q) of a resonant Fabry-Perot cavity due to the presence of an absorbing sample. The MMW absorption of the sample was determined by incrementing the frequency modulation (FM) deviation of the source frequency scanning the cavity resonance profile. The response curve of absorption signal versus fraction of oxygen in nitrogen was found to be linear throughout the working range of 1-100% O₂ (v/v) in N₂ with a slope of (1.407±0.007)×10⁻⁴ m⁻¹ (% O₂)⁻¹. The detection limit (3× standard deviation of the background) was found to be ∼0.8% (v/v). The MMW technique employed is advantageous since, unlike common MMW techniques, there is no vacuum requirement. Application of this method, to the monitoring of oxygen in gas mixtures of practical importance, is proposed. Values of the oxygen spectral absorption coefficients of lines between 55 and 60 GHz were measured at reduced pressure and found to be within ±2% of previous literature values. A pressure correction coefficient for O₂ absorption at 60 GHz in the 45-121 kPa range was obtained and found to be (1.354±0.014)×10⁻⁴ m⁻¹ kPa⁻¹.     

Ultraviolet absorbers for retarding wool photo-degradation: Sulphonated 2-hydroxybenzophenones and 2,2′-dihydroxybenzophenones

Nineteen sulphonated 2-hydroxybenzophenones and three sulphonated 2,2′-dihydroxybenzophenones have been prepared and compared with a commercially available member of each class of uv absorber as photo-protective agents for wool. Treated fabrics were exposed to Philips ML G/74 lamps and the extent of photo-tendering was assessed by measuring breaking loads and tear strengths. In general, 2-hydroxybenzophenones with 3-alkyl substituents provide better protection against photo-tendering than absorbers lacking 3-alkyl substituents. 2,2′-Dihydroxybenzophenones are more effective than 2-hydroxybenzophenones.

On the basis of effectiveness and ease of synthesis, 2,2′-dihydroxy-4,4′-bis-w-sulphobutyloxybenzophenone (VIIb) shows most promise as a photo-protective agent. At the 5% level of application it trebles the lifetime of wool fabric during exposure to sunlight through window glass. It also retards the photo-tendering and fading of wool fabrics containing either a red or a blue milling acid dye.     

Characterizing the "shell phase" formed from amphiphilic picolinates

The shell phase forms when certain picolinates are subjected to energy input (via sonication or vortexing) while exposed to a water/toluene mixture. A shell, about 600 A thick and containing the picolinate and (very likely) toluene, surround the water droplets that are always produced during the mixing process. Solubility in either phase appears to be deleterious to shell formation. The shells, stable for months, are not easily distorted but can be punctured, even skewered, with a syringe needle without destroying the sphere, yet there is enough mobility among the molecules to repair the physical damage after the needle is removed. This, plus the absence of evidence for crystallinity, suggests a solid or semisolid film forms when picolinates, with the aid of an aromatic solvent, are provided the energy to rearrange themselves on water droplet surfaces. Structure-activity comparisons among the 10 compounds studied indicate that chain-chain association and intermolecular hydrogen bonding are dominant forces in a side-by-side self-assembly of the molecules within the shells.     

Solid state radioluminescent lighting

We have demonstrated novel types of tritium-powered, solid-phase radioluminescent (RL) light sources. These lights include: (1) all-organic formulations comprised of polystyrene and fluorescent organic dyes; (2) polydimethylsiloxane-based systems incorporating inorganic phosphors; and (3) inorganic aerogel-based systems doped with phosphors. Three principal design consideration for these new RL lights are described. These include: (1) incorporation of tritium into the solid matrix; (2) molecular engineering to maximize light-output efficiency; and (3) strategies for increasing longevity. The advanced RL lights, which are of interest due to potential advantages in efficiency, brightness and safety, are being developed for emergency lighting uses and for battery and lighting applications in remote locations.     

The development of an 18-locus Y-STR system for forensic casework

The aim of the present work was to improve the discriminatory potential, and hence the probative value, of Y-STR-based testing by extending the set of Y chromosome STR loci available for forensic casework. In accordance with the requirements of a Y chromosome multiplex analytical system developed specifically for forensic casework use, we have sought to maximize the number of loci able to be co-amplified, ensure appropriate assay sensitivity (1–2 ng of input genomic DNA), balance inter-locus signals and minimize confounding female DNA artifacts. Two Y chromosome STR systems, multiplex I (MPI) and multiplex II (MPII), have been developed which permit the robust co-amplification of 18 Y-STRs. The loci include DYS19, DYS385(a) and (b), DYS388, DYS389I and II, DYS390, DYS391, DYS392, DYS393, DYS425, DYS434, DYS437, DYS438, DYS439, Y-GATA-C4, Y-GATA-A7.1 (DYS460) and Y-GATA-H4. The two multiplex systems are robust over a wide range of primer, magnesium, and DNA polymerase concentrations and perform well under a variety of cycling conditions. Complete male haplotypes can be obtained with as little as 100–250 pg of template DNA. Although a limited number of female DNA artifacts are observed in mixed stains in which the male DNA comprises 1/100 of the total, the male profile is easily discernible. Slightly modified versions of MPI and MPII demonstrate a significant reduction in female artifacts. Thus, it may not be necessary to employ a differential extraction strategy to obtain a male haplotype (or haplotypes in the case of multiple male donors) in cases of sexual assault. The potential utility of MPI and MPII for forensic casework is exemplified by their ability to dissect out the male haplotype in post-coital vaginal swabs and to determine the number of male donors in mixed semen stains.This study has emphasized the need for novel Y-STR multiplexes developed for forensic use to undergo a series of validation exercises that go beyond simply optimizing the PCR reaction conditions. Specifically, stringent performance checks on their efficacy need to be carried out using casework-type specimens in order to determine potential confounding effects from female DNA.     

Diastereoselective synthesis of substituted 2,3,4,5‐tetrahydro‐1H‐1‐benzazepine‐5‐carboxylic esters by a tandem reduction‐reductive animation reaction

An efficient, diastereoselective synthesis of substituted and unsubstituted 2,3,4,5‐tetrahydro‐1H‐1‐benzazepine‐5‐carboxylic esters has been developed based on the tandem reduction‐reductive amination reac tion. Catalytic hydrogenation of a series of 2‐(2‐nitrophenyl)‐5‐oxoalkanoic esters initiates a reaction sequence involving (1) reduction of the aromatic nitro group, (2) condensation of the N‐hydroxylamino (or amino) nitrogen with the side chain carbonyl, and (3) reduction of the seven‐membered cyclic imine. Cyclizations that produce 2‐alkyl‐2,3,4,5‐tetrahydro‐1H‐1‐benzazepine‐5‐carboxylic esters are diastereose lective for the product having the C2 alkyl and the C5 ester groups cis. In these reactions, the transannular ester group exerts a strong stereodirecting effect on the reduction of the cyclic imine intermediate, though not as strong as that observed in previous closures of 2‐alkyl‐1,2,3,4‐tetrahydroquinoline‐4‐carboxylic esters. This decrease in diastereoselectivity is attributed to (1) the greater distance between the ester and the imine double bond and (2) the increased conformational mobility of the larger ring, both of which diminish the stereodirecting effect of the ester. Finally, formation of the seven‐membered ring is sufficiently slow that reaction with the side chain ester group competes with heterocycle formation in several of the reactions.     

Synthesis of discodermolide intermediates from engineered polyketides

Key intermediates used in Smith’s total synthesis of discodermolide were synthesized from an engineered polyketide made via precursor feeding to genetically modified polyketide producing bacteria.     

Correlating axial and equatorial ligand field effects to the single-molecule magnet performances of a family of dysprosium bis-methanediide complexes

Treatment of the new methanediide–methanide complex [Dy(SCS)(SCSH)(THF)] (1Dy, SCS = {C(PPh₂S)₂}²⁻) with alkali metal alkyls and auxillary ethers produces the bis-methanediide complexes [Dy(SCS)₂][Dy(SCS)₂(K(DME)₂)₂] (2Dy), [Dy(SCS)₂][Na(DME)₃] (3Dy) and [Dy(SCS)₂][K(2,2,2-cryptand)] (4Dy). For further comparisons, the bis-methanediide complex [Dy(NCN)₂][K(DB18C6)(THF)(toluene)] (5Dy, NCN = {C(PPh₂NSiMe₃)₂}²⁻, DB18C6 = dibenzo-18-crown-6 ether) was prepared. Magnetic susceptibility experiments reveal slow relaxation of the magnetisation for 2Dy–5Dy, with open magnetic hysteresis up to 14, 12, 15, and 12 K, respectively (∼14 Oe s⁻¹). Fitting the alternating current magnetic susceptibility data for 2Dy–5Dy gives energy barriers to magnetic relaxation (U_eff) of 1069(129)/1160(21), 1015(32), 1109(70), and 757(39) K, respectively, thus 2Dy–4Dy join a privileged group of SMMs with U_eff values of ∼1000 K and greater with magnetic hysteresis at temperatures >10 K. These structurally similar Dy-components permit systematic correlation of the effects of axial and equatorial ligand fields on single-molecule magnet performance. For 2Dy–4Dy, the Dy-components can be grouped into 2Dy–cation/4Dy and 2Dy–anion/3Dy, where the former have almost linear C Dy C units with short average Dy C distances, and the latter have more bent C Dy C units with longer average Dy C bonds. Both U_eff and hysteresis temperature are superior for the former pair compared to the latter pair as predicted, supporting the hypothesis that a more linear axial ligand field with shorter M–L distances produces enhanced SMM properties. Comparison with 5Dy demonstrates unusually clear-cut examples of: (i) weakening the equatorial ligand field results in enhancement of the SMM performance of a monometallic system; (ii) a positive correlation between U_eff barrier and axial linearity in structurally comparable systems.

Studies on equatorial donor and C Dy C angle variation effects on energy barriers to the slow relaxation of magnetisation are reported.     

Origin of the acidity enhancement of formic acid over methanol: resonance versus inductive effects

Density functional theory calculations were employed to study the relative contribution of resonance versus inductive effects toward the 37 kcal/mol enhanced gas-phase acidity (DeltaH degrees (acid)) of formic acid (1) over methanol (2). The gas-phase acidities of formic acid, methanol, vinyl alcohol (5), and their vinylogues (6, 8, and 9) were calculated at the B3LYP/6-31+G level of theory. Additionally, acidities were calculated for the formic acid and vinyl alcohol vinylogues in which the formyl group and the vinyl group, respectively, were perpendicular to the rest of the conjugated system. Comparisons among these calculated acidities suggest that inductive effects are the predominant effects responsible for the enhanced acidity of formic acid over methanol, accounting for between roughly 62% and 65% of the total enhanced acidity; the remaining 38% to 35% of the acidity enhancement appears to be due to resonance effects. Further comparisons suggest that resonance effects are between roughly 58% and 65% of the 26 kcal/mol calculated acidity enhancement of vinyl alcohol over methanol, and the remaining 42% to 35% are due to inductive effects.