Surface and interfacial properties of PVDF/acrylic copolymer blends before and after UV exposure

Morphological and chemical properties of both the surface and interface of poly(vinylidene fluoride)/poly(methyl methacrylate)-co-poly(ethyl acrylate) (PVDF/PMMA-co-PEA) blend films have been investigated before and after the samples were exposed to ultraviolet (UV) irradiation using a xenon arc lamp at 50 °C and 9% relative humidity (RH) for 7 months. Surface and interfacial morphologies were studied by atomic force microscopy (AFM). Chemical composition information was obtained by confocal Raman microscopy, attenuated total reflection-FTIR spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. Results show an enrichment of the PVDF material at the air surface, while the acrylic copolymer enriches the interface. Blends having greater than 50% mass fraction of PVDF show little change in the surface morphology after UV exposure for 7 months. However, for a lower PVDF content, blends exhibit significant degradation of PMMA-co-PEA copolymer and a much rougher surface after UV exposure. Microstructural changes in the PVDF spherulites are also observed after UV degradation. It is found that the surface and interfacial morphologies are correlated with the chemical properties.     

Co-doped In2O3 thin films: Room temperature ferromagnets

Laser-ablated Co-doped In₂O₃ thin films were fabricated under various growth conditions on R-cut Al₂O₃ and MgO substrates. All Co:In₂O₃ films are well-crystallized, single phase, and room temperature ferromagnetic. Co atoms were well substituted for In atoms, and their distribution is greatly uniform over the whole thickness of the films. Films grown at 550 °C showed the largest magnetic moment of about 0.5 μ_B/Co, while films grown at higher temperatures have magnetic moments of one order smaller. The observed ferromagnetism above room temperature in Co:In₂O₃ thin films has confirmed that doping few percent of magnetic elements such as Co into In₂O₃ could result in a promising magnetic material.     

Facile synthesis of SnO2–ZnO core–shell nanowires for enhanced ethanol-sensing performance

The design of core–shell heteronanostructures is powerful tool to control both the gas selectivity and the sensitivity due to their hybrid properties. In this work, the SnO₂–ZnO core–shell nanowires (NWs) were fabricated via two-step process comprising the thermal evaporation of the single crystalline SnO₂ NWs core and the spray-coating of the grainy polycrystalline ZnO shell for enhanced ethanol sensing performance. The as-obtained products were investigated by X-ray diffraction, scanning electron microscopy, and photoluminescence. The ethanol gas-sensing properties of pristine SnO₂ and ZnO–SnO₂ core–shell NW sensors were studied and compared. The gas response to 500 ppm ethanol of the core–shell NW sensor increased to 33.84, which was 12.5-fold higher than that of the pristine SnO₂ NW sensor. The selectivity of the core–shell NW sensor also improved. The response to 100 ppm ethanol was about 14.1, whereas the response to 100 ppm liquefied petroleum gas, NH₃, H₂, and CO was smaller, and ranged from 2.5 to 5.3. This indicates that the core–shell heterostructures have great potential for use as gas sensing materials.     

Ti-free optical waveguiding regions produced by LiNbO3 etching during the indiffusion of Ti

We report the observation, first to our knowledge, of optical waveguiding found beneath trenches etched in congruent lithium niobate using the recently reported etching during the indiffusion of Ti process. Observations of multi-mode and single-mode guiding at visible wavelengths and preliminary measurements of waveguide insertion losses are presented.     

Fast electro-optical mode in photo-aligned reflective deformed helix ferroelectric liquid crystal cells

The electro-optical behavior of deformed helix ferroelectric liquid crystal in reflective mode is described in this paper. The electrically controlled reflectance has been measured at subkilohertz driving voltage frequency for different polarizations of the incident light and compared quite successfully with the simulation results.     

Contact mechanics modeling of piezo-actuated stick-slip microdrives

This paper draws a line from early attempts of modeling stick-slip microdrives to open questions from today’s research. As a basis, it contains a collection of substantial investigations on piezo-actuated stick-slip microdrives for nanomanipulation purposes. Friction models showing special characteristics and their mathematical representations are reviewed. It is found that the working properties of stick-slip drives strongly depend on friction characteristics of the contact points between the guiding elements, which is known for years. However, numerous publications in the field of friction and remaining problems — which cannot be explained by known friction models — indicate that there is a demand for even more friction-related research.Former attempts to model stick-slip drives are based on the so-called LuGre friction model, which is shortly presented. An empirical model called CEIM is also analyzed. It is an adaption of the elastoplastic model. The latter can cover not only the phenomenon “0-amplitude’ (described by the authors in recent publications), but also stick-slip based force generation scenarios. Nevertheless, interesting friction characteristics such as the generation of μN forces with stick-slip drives, which are already proven, cannot be covered by known friction models. It is pointed out which characteristics have to be considered.     

Hopf bifurcation control via a dynamic state-feedback control

To relocate two Hopf bifurcation points, simultaneously, to any desired locations in n-dimensional nonlinear systems, a novel dynamic state-feedback control law is proposed. Analytical schemes to determine the control gains according to the conditions for the emergence of Hopf bifurcation are derived. To verify the effectiveness of the proposed control law, numerical examples are provided.     

General one-loop formulas for $$Hrightarrow fbar{f}gamma $$ H → f f ¯ γ and its applications

The European Physical Journal C - Considering supergravity theory is a natural step in the development of gravity models. This paper follows the “algebraic“ path and constructs possible...     

A quasi double-grating grazing incidence pulsed dye laser

Continuous scanning of a 1 GHz pulsed laser line using only one 5-cm grating as an intracavity selective element is obtained from a pulsed dye laser pumped by a Nd: YAG (8 ns-532 nm) laser. Such a single-grating dye laser operates in the same way as a real double-grating grazing incidence laser and provides an appreciable improvement of the resolution (enhancement factor 2), compared with previous grazing incidence ones. The superiority of this laser cavity has been proved for single-longitudinal-mode operation.Laboratoire associé à l'Université de Paris-Sud