Synthesis and characterization of norbornene–ethylene–styrene terpolymers with a substituted ansa‐fluorenylamidodimethyltitanium‐based catalyst

This article reports a synthetic method for a norbornene–ethylene–styrene (N‐E‐S) terpolymer, which has not been well investigated so far, via incorporation of styrene (S) into vinyl‐type norbornene–ethylene (N‐E) copolymers catalyzed by a substituted ansa‐fluorenylamidodimethyltitanium [Me₂Si(3,6‐tBu₂Flu)(tBuN)]TiMe₂ catalyst ( I ) activated with a [Ph₃C][B(C₆F₅)₄]/Al(iBu)₃ cocatalyst at room temperature in toluene. The resulting terpolymerization product contained the targeted N‐E‐S terpolymer and the contaminated homopolymers, which were then able to be completely removed by solvent fractionation techniques. While homopolystyrene was easily extracted by fractionation with methylethylketone as a soluble part, homopolyethylene and a trace amount of homopolynorbornene could be perfectly separated by fractionation with chloroform as insoluble parts. The detail characterizations of a chloroform‐soluble polymer with gel permeation chromatography, nuclear magnetic resonance, and differential scanning calorimetry analyses proved that it contained a true N‐E‐S terpolymer with long N‐E sequences incorporated with isolated or short styrene sequences. The homogeneity of the morphology together with a single glass transition temperature that proportionally decreased with the increase of the styrene contents indicated that the N‐E‐S terpolymer obtained in this work is a random polymer with an amorphous structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2765–2773, 2007     

Anticancer agent development: X-ray crystal structure and keto-enol tautomerism of dimethyl 1-hydroxy-6,7-methylenedioxy-4-(3′,4′,5′-trimethoxyphenyl-trans-3,4-dihydronaphthalene-2,3-dicarboxylate

Structural and conformational information obtained from the crystal structure and solution¹H nmr investigations of the title compound are compared. The 4-aryltetralone, C₂₄H₂₄O₁₀, crystallizes as a chloroform solvate in the monoclinic space group, P2₁/n, witha=12.519(4),b=17.938(6),c=12.534(9)Å,=111.90(5)°, and D_calc=1.51 g cm^–3 forZ=4. The data for this compound were collected at –150°C. Least-squares refinement of 2796 observed [F _o5(F _o)] reflections led to the final agreement index ofR=0.062. A threefold static disorder was observed for one of the carboxyl groups. The second carboxyl group participates in an intramolecular hydrogen bond and is thus ordered. The¹H nmr spectrum revealed the title compound to exist as a keto-enol tautomeric mixture in solution. Vicinal hydrogen coupling constant analysis proved reliable in ascertaining B-ring stereochemistry of 2,3-disubstituted-4-aryltetralones.     

Reactions de photoaddition de benzo[b]selenophenes avec l'acetylene dicarboxylate de methyle et avec le dichloro-1,2 ethylene

Photoirradiated in presence of acetophenone, benzo[b]selenophene and its 3-methyl derivative add to dimethyl acetylenedicarboxylate. In each ease, the primary reaction product is unstable and has not been isolated. Photoexeited in its triplet state (the energy of which is in the neighbourhood of 69 $\text{kcal}\text{mole}$) benzo[b]selenophene and its 2- and 3-methyl, 2,3 dimethyl, 3 acetoxy and 2-methyl-3-acetoxy derivatives add to 1,2 dichloroethylene leading to cyclobutanes. Neither cyclo-addition occurs in absence of photosensitiser. Single-crystal X-ray analysis gave the structures of the two adducts of 3-acetoxybenzo[b]selenophene with trans-1,2-dichloroethylene. In both compounds the chlorine atoms are trans.     

Hydropolymerization of ethylene,initiated by carbon monoxide,on Co-zeolite catalysts at temperatures below 100°C

Conclusions Both the extent of C₂H₄ hydropolymerization, initiated by 0.01% CO, on Co zeolites at a temperature below 100°C, and the initiating effect increase symbatically with increase in the ratio of SiO₂/Al₂O₃ in the zeolite in the investigated limits (from 2 to 10).Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 4, pp. 894–896, April, 1974.     

Synthesis of N,N-diethyldithiocarbamate functionalized 1,4-polyisoprene, from natural rubber and synthetic 1,4-polyisoprene

N,N-Diethyldithiocarbamate functionnalized 1,4-polyisoprenes were prepared from 1,4-polyisoprenes (natural or synthetic). The syntheses were performed by nucleophilic addition of N,N-diethyldithiocarbamate salts upon oxirane rings of epoxidized units according to a SN2 mechanism with ring opening. Studies on model molecules of epoxidized 1,4-polyisoprene units (1,2-epoxy-1-methylcyclohexane and 4,5-epoxy-4-methyloctane) were previously achieved to develop the procedure. The best yields were obtained at low temperature in polar medium, and more especially in water with sodium N,N-diethyldithiocarbamate (DEDT-Na) as reagent. A diastereospecific addition was noted when reaction was performed in water with DEDT-Na. Afterwards, the developed procedure was successfully generalized to epoxidized synthetic polyisoprenes and epoxidized natural rubber (in THF, then in latex medium). Excellent results were obtained in latex medium with epoxidized natural rubber (ENR) latices. As with the models, a diastereospecific addition of sodium N,N-diethyldithiocarbamate trihydrate onto epoxidized 1,4-polyisoprene units of ENR was observed at the condition to bring the latex medium to pH 8 before introduction of DEDT-Na. Influence of temperature, drc, and DEDT-Na concentration were successively examined to determine the best conditions of the addition on ENR latices.     

Research on 1-azabicyclic compounds

1-(2-Furyl)-3-amino-4,4-dimethylpentane was used to obtain 3-tert-butyl-1,2-dihydropyrrolizine, the catalytic hydrogenation of which over Rh/Al₂O₃ at room temperature gives a mixture of cis- and trans-3,8-H-3-ter-butylpyrrolizidines with predominance of the cis isomer, whereas hydrogenation at 90–100 °C gives a mixture containing the trans isomer as the principal component. The three-dimensional structures of the isomers follow from data on the catalytic hydrogenation and isomerization and the IR, Raman, and PME spectra. A considerable percentage of the trans-fused form is characteristic for cis-3,8-H-3-tert-butylpyrrolizidine.     

Contribution à la phytochimie du genre Gentiana. XXVI.. Identification d'une nouvelle di-O-glucosyl cinnamoyl-C-glucosylflavone extraite des feuilles de Gentiana X marcailhouana RY.

Phytochemistry of Genus Gentiana. XXVI. Identification of a New Di-O-glucosyl Cinnamoyl-C-glucosylflavone in the Leaves of Gentiana X marcailhouana RY . A new di-O-glucosyl cinnamoyl-C-glucosylflavone has been identified as 4′-O-β-D -glucosyl-2″-O-[2-O-β-D -glucosyl-2,4,5-trihydroxy-(E)-cinnamoyl]isoorientin ( 1 ).     

Synthesis of cation-exchanged laponite suspensions by laser ablation of microsized-metal particles in liquid

Laser ablation in the liquid technique has been used to synthesize cation-exchanged laponite suspensions. In summary, laser ablation of the microsize-metal powder (Co, Al, and Cu) dispersed in an aqueous solution containing deionized water laponite crystals was carried out using laser beam generated by a single-mode, Q-switched Nd-Yag laser operating at 532 nm with a pulse duration of 5.5 ns and 10 Hz repetition rate. Laser fluence was 0.265 J/cm² for all tests. For all samples, the mass fraction of laponite was 1%. General observations of the prepared samples indicated that an aqueous suspension of 1 wt% laponite retained its free flowing liquid phase characteristics even after aging for several weeks. When bivalent cationic metals (Cu, Co, Al) were ablated in it for about 1 h, even with a small amount of the metal (0.025% and 0.050%) were generated, the suspension became highly viscous and behaved as a shear-thinning and thixotropic material. That is, the suspension gelled strongly when it was allowed to rest. The gels, however, could easily be reverted to a low viscosity liquid with simple shaking. Information from TEM and XRD analysis indicated that such a sol-gel transformation might be due to the charge exchange between the cationic species produced during the laser ablation and the sodium ions in the interlayers of the clay sheets.     

Measurement of γp→K + Λ and γp→K + Σ 0 at photon energies up to 1.47 GeV

The reactions pK ⁺ and pK ^{+ 0} have been measured with the multiparticle detector system SAPHIR at ELSA in Bonn. Besides the differential cross sections the polarization and, for the first time, the ⁰ polarization have been determined in a photon induced reaction. All data are presented as functions of the photon energy (from threshold up to 1.47 GeV) and of the kaon production angle (0°–180°). The polarization of both and ⁰ is substantial at all energies and varies strongly with the production angle.This work is supported by the Bundesminister für Forschung und Technologie (BMFT), FK 06 BN 621 I     

Partition temperatures ofK 0 andΛ 0 fromπ + p collisions

The rapidity distributions of inclusive ⁺ p ^–,K ⁰, ⁰ andK ^* (892) atP _1ab=16 GeV/c of CERN experiments, are analyzed using the covariant partition temperatureT _p model. In the fireball system, apart fromK ^* (892),T _p ^* m, no indication of thermal equilibrium, the average momentum ofK ⁰ and ⁰ being approximately equal and in the opposite direction, the entropy density is practically the same forK ⁰ and ⁰ but less than that of ^–. It is found that the principle of equipartition holds rather for the momenta of ,K, and in the fireball system.