Development of a “Built-in” Scanning Near Field Microscope Head for an Atomic Force Microscope System and Stress Mapping of an Al2O3/ZrO2 Eutectic Composite

We constructed a scanning near-field optical microscope (SNOM) on a commercially available atomic force microscopy (AFM) apparatus (SPM-9500J2; Shimadzu Corp.) to measure the stress distribution in ceramic composite materials. Features of our SNOM system are: (1) a compact SNOM head substituted for the original AFM head; (2) a wide scanning range (125 × 125 μm²) inherited from the original scanner; (3) use of conventional shear-force regulation; (4) an optical system for the illumination-collection (I-C) mode; (5) excitation by a 488 nm line of an Ar-ion laser, and (6) light detection by photon counting or a polychromator equipped with an electronically cooled charge coupled device (CCD). This SNOM system was used to measure the surface structure and stress distribution of an Al₂O₃/ZrO₂ eutectic composite. We simultaneously measured topographic images and fluorescence spectra of an Al₂O₃/ZrO₂ eutectic composite. We estimated its peak intensity, peak position, and peak width from the fluorescence spectrum during scanning, which respectively correspond to the abundance of Al₂O₃, stress in the grain, and the anisotropy of that stress. Mapping images showed that the stress and its anisotropy were weaker in the center of the Al₂O₃ grain than its boundary between Al₂O₃ and ZrO₂. That observation suggests that Al₂O₃ underwent intense anisotropic stress induced by volume expansion in the phase transition of ZrO₂ from the cubic phase to the monoclinic phase during preparation.     

Landau levels in a novel two-dimensional electron system interacting with charged quantum dots

Landau levels have been theoretically investigated in a two-dimensional electron gas near a quantum dot (QD) layer. By a diagrammatical method, we have formulated the self-energy for the Landau level and deduced its relation to the AC conductivity σ_loc(ω) in the QD layer. As an example, we have examined the density of states in the case where σ_loc(ω) is described by Aω^S(S=0.8). It is found that the Landau levels are broadened due to the interaction with the localized electrons in the QDs.     

Fourier domain optical coherence tomography using optical demultiplexers imaging at 60,000,000 lines/s

We describe high-speed Fourier domain optical coherence tomography (OCT) using optical demultiplexers (ODs) for spectral dispersion. The OD enables separation of a narrow spectral band of 14 GHz (0.11 nm) from a broadband incident light at 256 different frequencies in 25.0 GHz intervals centered at 192.2 THz (1559.8 nm). OCT imaging of 60,000,000 axial scans per second was achieved through parallel signal acquisition using 256 balanced photoreceivers to simultaneously detect all the output signals from the ODs in a Fourier domain OCT system. OCT imaging at a 16 kHz frame rate, 1100 A-lines per frame, 3 mm depth range, and 23 microm resolution was demonstrated using a resonant scanner for lateral scanning.     

Interaction of highly charged ions with carbon-based materials using Kobe EBIS

Interaction of highly charged ions (HCIs) with surfaces produce various specific phenomena as a consequence of the potential energy that HCI possesses. In the present study, we have observed photon emission, structural, magnetic, and electronic modification on various carbon-based materials such as carbon nanotube by the impact of HCIs using an electron beam ion source named Kobe EBIS installed at the Kobe University. In order to study the potential effect, HCIs of Ar^q+ (q = 6–16) with the intensity of 0.1–1 nA are projected on the surface with a constant kinetic energy (16 keV). For photon emission measurements, we observed spatial and spectral distribution of visible light emission from the surface during irradiation with HCIs. On the other hand, the structural modification of multi-walled carbon nanotubes (MWCNTs) irradiated with HCIs has been analyzed using a transmission electron microscopy and Raman spectroscopy. Irradiation effects on the resistivity of single MWCNT supported on micrometer scale bridge pattern were also measured. We have also measured magnetic structure of highly oriented pyrolytic graphite irradiated with HCIs using electron spin resonance at low temperature. At the present paper, we will review our recent experimental results on the interaction of HCI with various carbon-based materials.     

An estimated quantitative lateral flow immunoassay for determination of artesunate using monoclonal antibody

There have been reports of fake artesunate (ART), which has led to deaths from untreated malaria in South East Asia. To rapidly screen for fake and adulterated ART products in the drug market, a lateral flow immunoassay (LFIA) based on a colloidal gold–monoclonal antibody probe for detection of ART within samples was developed. With this method, the calibration curve for ART was determined by the intensity ratio of the test and control bands at various ART concentrations. The linearity range was 12.5–200 μg/ml of ART. Samples were tested by the developed LFIA and can be calculated for ART contents. The levels of ART in the samples were also confirmed by enzyme-linked immunosorbent assay. The results of the two methods were in good conformance. The proposed LFIA was demonstrated to be a simple and rapid analytical method for detecting ART in the pharmaceutical formulation.     

Relationship between apparent diffusion coefficient and signal intensity in endometrial and other pelvic cysts

We evaluated whether apparent diffusion coefficient (ADC) value is more useful than signal intensity for differentiating endometrial cysts from other pelvic cysts. In an in vitro study, signal intensity and diffusion coefficients were measured in whole blood phantoms in which blood oxidation was gradually increased and concentration subsequently diluted. Although both signal intensity and diffusion value were largely affected by blood concentration, diffusion value was almost independent of blood oxidation and red blood cell lysis-related diminution of magnetic nonhomogeneity, both factors greatly affecting signal intensity on T1- and T2-weighted images. In an in vivo study, differentiation between endometrial and other pelvic cysts was attempted by means of ADC values and signal ratios of cysts to muscles on T1- and T2-weighted images (T1- and T2-ratios). Endometrial cysts tended to show lower T2-ratios, higher T1-ratios, and lower ADC values than other pelvic cysts (p < 0.001). However, ADC values were not correlated with T1- and T2-ratios (p < /0.15/). The ability of ADC value to discriminate between these two groups (discriminant rate, 91.4%) was higher than that of T2-ratio (71.4%) or T1-ratio (88.6%). If combined, ADC and T1-ratio (or T2-ratio) showed higher discriminant rate (94.3%) than the combination of T1- and T2 ratios (88.6%). ADC value might be useful for evaluating the blood concentration of a cystic lesion, because diffusion value is more closely related to blood concentration and almost independent of blood oxidation and red blood cell lysis that largely affect signal intensity.     

Quantum-limited noise performance of a mode-locked laser diode

Low-noise operation of a 9-GHz hybridly mode-locked laser diode is demonstrated. The integrated timing jitter was 47 fs (10 Hz to 10 MHz) and 86 fs (10 Hz to 4.5 GHz), with a pulse width of 6.7 ps. The noise performance as a function of filter bandwidth and oscillator noise is also addressed.     

Riemann zeta function and Lyapunov-type inequalities for certain higher order differential equations

This note generalizes the well known Lyapunov-type inequalities for second-order linear differential equations to certain 2M-th order linear differential equations with five types of boundary conditions. The usage of the best constant of some Sobolev-type inequalities clarify the process for obtaining such inequality and sharpen the result of Çakmak [2].