Dynamic recording of a digital hologram with single exposure by a wave-splitting phase-shifting method

The wave-splitting phase-shifting digital holography using a pixelated microretarder array is proposed. By using four intensity images recorded by the pixelated microretarder array, Stokes parameters of the incident wave can be calculated. The fully complex amplitude distribution of the object wave can be obtained by using Stokes parameters, if the polarization states of the object and reference waves are linear and orthogonal. Two sets of experimental results are provided to verify the feasibility of the proposed method. One is the result for a movie recording using a CW laser and the other is the result for instant recording using a single pulsed laser.     

Pre-fibrillation of pulps to manufacture cellulose nanofiber-reinforced high-density polyethylene using the dry pulp direct kneading method

The dry pulp direct kneading method is an industrially viable, low-energy process for manufacturing cellulose nanofiber (CNF)-reinforced polymer composites, where the chemically modified pulps are nanofibrillated and uniformly dispersed in the polymer matrix during melt compounding. In the present study, cellulose fibers of various sizes ranging from surface-fibrillated pulps (20 μm in width) to fine CNFs (20 nm in width) were prepared from softwood bleached kraft pulps using a refiner and a high-pressure homogenizer. These cellulose fibers were modified with alkenyl succinic anhydride and dried. The dried fibers were used as a feed material for melt compounding in the dry pulp direct kneading method to fabricate CNF-reinforced high-density polyethylene (HDPE). When surface-fibrillated pulps were employed as a feed material, the pulps were nanofibrillated and dispersed uniformly in the HDPE matrix during melt compounding. The resulting composites had much better properties—i.e., much higher tensile modulus and strength values, and much lower coefficient of thermal expansion values—than the composites produced using pulps without pre-fibrillation. However, when CNFs were used as a feed material, they were shortened and agglomerated during melt compounding, and the properties of the composites consequently deteriorated. The study concludes that surface-fibrillated pulp, which can be produced cost-effectively using a refiner on an industrial scale, is more suitable as a feed material than CNFs for melt compounding in the dry pulp direct kneading method. This finding enables the elimination of a preliminary step in the preparation of CNFs from pulps, which is a time-consuming and energy-intensive process.

Graphical abstract

     

Approximate analytic expressions for the diffusiophoretic velocity of a spherical colloidal particle

The general expression is derived for the diffusiophoretic velocity of a spherical colloidal particle of radius a in a concentration gradient of symmetrical electrolyte. On the basis of this expression, simple approximate analytic expressions for the diffusiophoretic velocity correct up to the order of 1/κa is derived, where κ is the Debye-Hückel parameter. It is found that the approximate expression correct to order unity can be applied for κa ≥ 50 with negligible errors, while the approximate expression correct to order 1/κa can be applied for κa ≥ 20 with negligible errors.     

Intermolecular Halogen Bond Detected in Racemic and Optically Pure N-C Axially Chiral 3-(2-Halophenyl)quinazoline-4-thione Derivatives

The halogen bond has been widely used as an important supramolecular tool in various research areas. However, there are relatively few studies on halogen bonding related to molecular chirality. 3-(2-Halophenyl)quinazoline-4-thione derivatives have stable atropisomeric structures due to the rotational restriction around an N-C single bond. In X-ray single crystal structures of the racemic and optically pure N-C axially chiral quinazoline-4-thiones, we found that different types of intermolecular halogen bonds (C=S⋯X) are formed. That is, in the racemic crystals, the intermolecular halogen bond between the ortho-halogen atom and sulfur atom was found to be oriented in a periplanar conformation toward the thiocarbonyl plane, leading to a syndiotactic zig-zag array. On the other hand, the halogen bond in the enantiomerically pure crystals was oriented orthogonally toward the thiocarbonyl plane, resulting in the formation of a homochiral dimer. These results indicate that the corresponding racemic and optically pure forms in chiral molecules are expected to display different halogen bonding properties, respectively, and should be separately studied as different chemical entities.     

Novel synthesis of heterocyclic spirans by tandem cycloaddition to sulfur-containing heterocumulenes

Novel Ni(C0)₄-promoted tandem cycloadditions of diphenylcyclo- propenone to isothiocyanates and to CS₂ were found to provide new heterocyclic spirans, pyrroline-2-one-5-spiro-5′-thiolene-4′-ones and a thiolene-2-one-5-spiro-5′-thiolene-4′-one, respectively, in moderate yields.     

Synthesis of 4,10-dihydro-4,10-dioxo-1H[1]benzothiopyrano[3,2-B]pyridine and 7-oxo-7,13-dihydro[1]benzothiopyrano[2,3-b]-1,5-benzodiazepine

3-Amino-4H-1-benzothiopyran-4-one (3-aminothiochromone) was easily prepared by reaction of 3-bromo-thiochromen-4-one with sodium azide in methanol-water. Condensation of 3-aminothiochromone with diethyl ethoxymethylenemalonate and with dimethyl acetylenedicarboxylate gave intermediates, which were thermally cyclized to give 4,10-dihydro-4,10-dioxo-1H[1]benzothiopyrano[3,2-b]pyridinecarboxylates. 3-Formyl-thiochromone was condensed with o-phenylenediamine to give 7-oxo-7,13-dihydro[1]benzothiopyrano[2,3-b]-1,5-benzodiazepine.     

A Defective Nanotube Molecule of C552H496N24 with Pyridinic and Pyrrolic Nitrogen Atoms

A 3-nm molecule comprising a cylindrical core and cross-shaped rims was designed and synthesized by developing a modular synthetic route. By using a cyclic precursor from previous studies as a starting material, multiple carbazole units were installed at the rims of the defective cylinder. The defective cylinder was synthetically doped with two types of nitrogen atoms, that is, pyridinic and pyrrolic nitrogen atoms, which resulted in solvatochromic shifts in fluorescence by charge-transfer interactions. The structure of the large, C₅₅₂H₄₉₆N₂₄ molecule was fully disclosed by crystallographic analyses, and the unique helical arrangement of nitrogen-doped cylinders in the crystal was revealed.     

Molecular Recognition of Nucleic Acid Bases in Water by Hydrogen Bonding of Poly(vinyldiaminotriazine)

Poly(2-vinyl-4,6-diamino-1,3,5-triazine) efficiently binds nucleic acid bases and nucleosides in water by using complementary hydrogen bonding. The binding activity decreases in the order: U, T > A C, G. The corresponding monomer shows virtually no activity, indicating a predominant role of polymer effect for the molecular recognition in water.     

Structure of Sol-Gel-Derived Sodium Dititanate Glass

The sodium dititanate, Na₂O·2TiO₂ glass was prepared by the sol-gel method. The structure of the glass, especially local environment of Ti⁴⁺ ions was examined using X-ray diffraction and X-ray absorption fine structure (XAFS) analyses, and was compared with that of the melt-derived glass with the same composition. It was found that Ti⁴⁺ ions are rather in five-fold coordination state, forming TiO₅ pyramids with one doubly bonded Ti=O in the gel-glass, while they were in lower coordination state or four-fold coordination in the melt-derived glass.     

Chiral Interlocked Corrole Dimers Directly Linked at Inner Carbon Atoms of Confused Pyrrole Rings

A facile synthetic strategy towards conformationally stable chiral chromophores based on dimeric porphyrinoids has been established. A peculiar class of face-to-face intramolecularly interlocked corrole dimers were formed by the oxidative C−C coupling linked at the inner carbon sites upon simple treatment of copper(II) ions. Their intrinsic electronic structures were modulated by the peripheral corrole ring annulations, which lead to distinct optical properties and redox profiles. The stereogenic carbon centers implemented in the confused corrole skeleton provided a rationale for designing novel chiral materials.